blob: 7c5ecb8a01192ed6d04a2884d31aa1c7f66bb13c [file] [log] [blame]
// Copyright 2022 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
#include "go_asm.h"
#include "go_tls.h"
#include "funcdata.h"
#include "textflag.h"
#define REGCTXT R29
TEXT runtime·rt0_go(SB),NOSPLIT|TOPFRAME,$0
// R3 = stack; R4 = argc; R5 = argv
ADDV $-24, R3
MOVW R4, 8(R3) // argc
MOVV R5, 16(R3) // argv
// create istack out of the given (operating system) stack.
// _cgo_init may update stackguard.
MOVV $runtime·g0(SB), g
MOVV $(-64*1024), R30
ADDV R30, R3, R19
MOVV R19, g_stackguard0(g)
MOVV R19, g_stackguard1(g)
MOVV R19, (g_stack+stack_lo)(g)
MOVV R3, (g_stack+stack_hi)(g)
// if there is a _cgo_init, call it using the gcc ABI.
MOVV _cgo_init(SB), R25
BEQ R25, nocgo
MOVV R0, R7 // arg 3: not used
MOVV R0, R6 // arg 2: not used
MOVV $setg_gcc<>(SB), R5 // arg 1: setg
MOVV g, R4 // arg 0: G
JAL (R25)
nocgo:
// update stackguard after _cgo_init
MOVV (g_stack+stack_lo)(g), R19
ADDV $const_stackGuard, R19
MOVV R19, g_stackguard0(g)
MOVV R19, g_stackguard1(g)
// set the per-goroutine and per-mach "registers"
MOVV $runtime·m0(SB), R19
// save m->g0 = g0
MOVV g, m_g0(R19)
// save m0 to g0->m
MOVV R19, g_m(g)
JAL runtime·check(SB)
// args are already prepared
JAL runtime·args(SB)
JAL runtime·osinit(SB)
JAL runtime·schedinit(SB)
// create a new goroutine to start program
MOVV $runtime·mainPC(SB), R19 // entry
ADDV $-16, R3
MOVV R19, 8(R3)
MOVV R0, 0(R3)
JAL runtime·newproc(SB)
ADDV $16, R3
// start this M
JAL runtime·mstart(SB)
MOVV R0, 1(R0)
RET
DATA runtime·mainPC+0(SB)/8,$runtime·main<ABIInternal>(SB)
GLOBL runtime·mainPC(SB),RODATA,$8
TEXT runtime·breakpoint(SB),NOSPLIT|NOFRAME,$0-0
BREAK
RET
TEXT runtime·asminit(SB),NOSPLIT|NOFRAME,$0-0
RET
TEXT runtime·mstart(SB),NOSPLIT|TOPFRAME,$0
JAL runtime·mstart0(SB)
RET // not reached
// func cputicks() int64
TEXT runtime·cputicks(SB),NOSPLIT,$0-8
RDTIMED R0, R4
MOVV R4, ret+0(FP)
RET
/*
* go-routine
*/
// void gogo(Gobuf*)
// restore state from Gobuf; longjmp
TEXT runtime·gogo(SB), NOSPLIT|NOFRAME, $0-8
MOVV buf+0(FP), R4
MOVV gobuf_g(R4), R5
MOVV 0(R5), R0 // make sure g != nil
JMP gogo<>(SB)
TEXT gogo<>(SB), NOSPLIT|NOFRAME, $0
MOVV R5, g
JAL runtime·save_g(SB)
MOVV gobuf_sp(R4), R3
MOVV gobuf_lr(R4), R1
MOVV gobuf_ret(R4), R19
MOVV gobuf_ctxt(R4), REGCTXT
MOVV R0, gobuf_sp(R4)
MOVV R0, gobuf_ret(R4)
MOVV R0, gobuf_lr(R4)
MOVV R0, gobuf_ctxt(R4)
MOVV gobuf_pc(R4), R6
JMP (R6)
// void mcall(fn func(*g))
// Switch to m->g0's stack, call fn(g).
// Fn must never return. It should gogo(&g->sched)
// to keep running g.
TEXT runtime·mcall<ABIInternal>(SB), NOSPLIT|NOFRAME, $0-8
#ifdef GOEXPERIMENT_regabiargs
MOVV R4, REGCTXT
#else
MOVV fn+0(FP), REGCTXT
#endif
// Save caller state in g->sched
MOVV R3, (g_sched+gobuf_sp)(g)
MOVV R1, (g_sched+gobuf_pc)(g)
MOVV R0, (g_sched+gobuf_lr)(g)
// Switch to m->g0 & its stack, call fn.
MOVV g, R4 // arg = g
MOVV g_m(g), R20
MOVV m_g0(R20), g
JAL runtime·save_g(SB)
BNE g, R4, 2(PC)
JMP runtime·badmcall(SB)
MOVV 0(REGCTXT), R20 // code pointer
MOVV (g_sched+gobuf_sp)(g), R3 // sp = m->g0->sched.sp
ADDV $-16, R3
MOVV R4, 8(R3)
MOVV R0, 0(R3)
JAL (R20)
JMP runtime·badmcall2(SB)
// systemstack_switch is a dummy routine that systemstack leaves at the bottom
// of the G stack. We need to distinguish the routine that
// lives at the bottom of the G stack from the one that lives
// at the top of the system stack because the one at the top of
// the system stack terminates the stack walk (see topofstack()).
TEXT runtime·systemstack_switch(SB), NOSPLIT, $0-0
UNDEF
JAL (R1) // make sure this function is not leaf
RET
// func systemstack(fn func())
TEXT runtime·systemstack(SB), NOSPLIT, $0-8
MOVV fn+0(FP), R19 // R19 = fn
MOVV R19, REGCTXT // context
MOVV g_m(g), R4 // R4 = m
MOVV m_gsignal(R4), R5 // R5 = gsignal
BEQ g, R5, noswitch
MOVV m_g0(R4), R5 // R5 = g0
BEQ g, R5, noswitch
MOVV m_curg(R4), R6
BEQ g, R6, switch
// Bad: g is not gsignal, not g0, not curg. What is it?
// Hide call from linker nosplit analysis.
MOVV $runtime·badsystemstack(SB), R7
JAL (R7)
JAL runtime·abort(SB)
switch:
// save our state in g->sched. Pretend to
// be systemstack_switch if the G stack is scanned.
JAL gosave_systemstack_switch<>(SB)
// switch to g0
MOVV R5, g
JAL runtime·save_g(SB)
MOVV (g_sched+gobuf_sp)(g), R19
MOVV R19, R3
// call target function
MOVV 0(REGCTXT), R6 // code pointer
JAL (R6)
// switch back to g
MOVV g_m(g), R4
MOVV m_curg(R4), g
JAL runtime·save_g(SB)
MOVV (g_sched+gobuf_sp)(g), R3
MOVV R0, (g_sched+gobuf_sp)(g)
RET
noswitch:
// already on m stack, just call directly
// Using a tail call here cleans up tracebacks since we won't stop
// at an intermediate systemstack.
MOVV 0(REGCTXT), R4 // code pointer
MOVV 0(R3), R1 // restore LR
ADDV $8, R3
JMP (R4)
// func switchToCrashStack0(fn func())
TEXT runtime·switchToCrashStack0(SB), NOSPLIT, $0-8
MOVV fn+0(FP), REGCTXT // context register
MOVV g_m(g), R4 // curm
// set g to gcrash
MOVV $runtime·gcrash(SB), g // g = &gcrash
JAL runtime·save_g(SB)
MOVV R4, g_m(g) // g.m = curm
MOVV g, m_g0(R4) // curm.g0 = g
// switch to crashstack
MOVV (g_stack+stack_hi)(g), R4
ADDV $(-4*8), R4, R3
// call target function
MOVV 0(REGCTXT), R6
JAL (R6)
// should never return
JAL runtime·abort(SB)
UNDEF
/*
* support for morestack
*/
// Called during function prolog when more stack is needed.
// Caller has already loaded:
// loong64: R31: LR
//
// The traceback routines see morestack on a g0 as being
// the top of a stack (for example, morestack calling newstack
// calling the scheduler calling newm calling gc), so we must
// record an argument size. For that purpose, it has no arguments.
TEXT runtime·morestack(SB),NOSPLIT|NOFRAME,$0-0
// Called from f.
// Set g->sched to context in f.
MOVV R3, (g_sched+gobuf_sp)(g)
MOVV R1, (g_sched+gobuf_pc)(g)
MOVV R31, (g_sched+gobuf_lr)(g)
MOVV REGCTXT, (g_sched+gobuf_ctxt)(g)
// Cannot grow scheduler stack (m->g0).
MOVV g_m(g), R7
MOVV m_g0(R7), R8
BNE g, R8, 3(PC)
JAL runtime·badmorestackg0(SB)
JAL runtime·abort(SB)
// Cannot grow signal stack (m->gsignal).
MOVV m_gsignal(R7), R8
BNE g, R8, 3(PC)
JAL runtime·badmorestackgsignal(SB)
JAL runtime·abort(SB)
// Called from f.
// Set m->morebuf to f's caller.
MOVV R31, (m_morebuf+gobuf_pc)(R7) // f's caller's PC
MOVV R3, (m_morebuf+gobuf_sp)(R7) // f's caller's SP
MOVV g, (m_morebuf+gobuf_g)(R7)
// Call newstack on m->g0's stack.
MOVV m_g0(R7), g
JAL runtime·save_g(SB)
MOVV (g_sched+gobuf_sp)(g), R3
// Create a stack frame on g0 to call newstack.
MOVV R0, -8(R3) // Zero saved LR in frame
ADDV $-8, R3
JAL runtime·newstack(SB)
// Not reached, but make sure the return PC from the call to newstack
// is still in this function, and not the beginning of the next.
UNDEF
TEXT runtime·morestack_noctxt(SB),NOSPLIT|NOFRAME,$0-0
// Force SPWRITE. This function doesn't actually write SP,
// but it is called with a special calling convention where
// the caller doesn't save LR on stack but passes it as a
// register (R5), and the unwinder currently doesn't understand.
// Make it SPWRITE to stop unwinding. (See issue 54332)
MOVV R3, R3
MOVV R0, REGCTXT
JMP runtime·morestack(SB)
// reflectcall: call a function with the given argument list
// func call(stackArgsType *_type, f *FuncVal, stackArgs *byte, stackArgsSize, stackRetOffset, frameSize uint32, regArgs *abi.RegArgs).
// we don't have variable-sized frames, so we use a small number
// of constant-sized-frame functions to encode a few bits of size in the pc.
// Caution: ugly multiline assembly macros in your future!
#define DISPATCH(NAME,MAXSIZE) \
MOVV $MAXSIZE, R30; \
SGTU R19, R30, R30; \
BNE R30, 3(PC); \
MOVV $NAME(SB), R4; \
JMP (R4)
// Note: can't just "BR NAME(SB)" - bad inlining results.
TEXT ·reflectcall(SB), NOSPLIT|NOFRAME, $0-48
MOVWU frameSize+32(FP), R19
DISPATCH(runtime·call32, 32)
DISPATCH(runtime·call64, 64)
DISPATCH(runtime·call128, 128)
DISPATCH(runtime·call256, 256)
DISPATCH(runtime·call512, 512)
DISPATCH(runtime·call1024, 1024)
DISPATCH(runtime·call2048, 2048)
DISPATCH(runtime·call4096, 4096)
DISPATCH(runtime·call8192, 8192)
DISPATCH(runtime·call16384, 16384)
DISPATCH(runtime·call32768, 32768)
DISPATCH(runtime·call65536, 65536)
DISPATCH(runtime·call131072, 131072)
DISPATCH(runtime·call262144, 262144)
DISPATCH(runtime·call524288, 524288)
DISPATCH(runtime·call1048576, 1048576)
DISPATCH(runtime·call2097152, 2097152)
DISPATCH(runtime·call4194304, 4194304)
DISPATCH(runtime·call8388608, 8388608)
DISPATCH(runtime·call16777216, 16777216)
DISPATCH(runtime·call33554432, 33554432)
DISPATCH(runtime·call67108864, 67108864)
DISPATCH(runtime·call134217728, 134217728)
DISPATCH(runtime·call268435456, 268435456)
DISPATCH(runtime·call536870912, 536870912)
DISPATCH(runtime·call1073741824, 1073741824)
MOVV $runtime·badreflectcall(SB), R4
JMP (R4)
#define CALLFN(NAME,MAXSIZE) \
TEXT NAME(SB), WRAPPER, $MAXSIZE-48; \
NO_LOCAL_POINTERS; \
/* copy arguments to stack */ \
MOVV arg+16(FP), R4; \
MOVWU argsize+24(FP), R5; \
MOVV R3, R12; \
ADDV $8, R12; \
ADDV R12, R5; \
BEQ R12, R5, 6(PC); \
MOVBU (R4), R6; \
ADDV $1, R4; \
MOVBU R6, (R12); \
ADDV $1, R12; \
JMP -5(PC); \
/* set up argument registers */ \
MOVV regArgs+40(FP), R25; \
JAL ·unspillArgs(SB); \
/* call function */ \
MOVV f+8(FP), REGCTXT; \
MOVV (REGCTXT), R25; \
PCDATA $PCDATA_StackMapIndex, $0; \
JAL (R25); \
/* copy return values back */ \
MOVV regArgs+40(FP), R25; \
JAL ·spillArgs(SB); \
MOVV argtype+0(FP), R7; \
MOVV arg+16(FP), R4; \
MOVWU n+24(FP), R5; \
MOVWU retoffset+28(FP), R6; \
ADDV $8, R3, R12; \
ADDV R6, R12; \
ADDV R6, R4; \
SUBVU R6, R5; \
JAL callRet<>(SB); \
RET
// callRet copies return values back at the end of call*. This is a
// separate function so it can allocate stack space for the arguments
// to reflectcallmove. It does not follow the Go ABI; it expects its
// arguments in registers.
TEXT callRet<>(SB), NOSPLIT, $40-0
NO_LOCAL_POINTERS
MOVV R7, 8(R3)
MOVV R4, 16(R3)
MOVV R12, 24(R3)
MOVV R5, 32(R3)
MOVV R25, 40(R3)
JAL runtime·reflectcallmove(SB)
RET
CALLFN(·call16, 16)
CALLFN(·call32, 32)
CALLFN(·call64, 64)
CALLFN(·call128, 128)
CALLFN(·call256, 256)
CALLFN(·call512, 512)
CALLFN(·call1024, 1024)
CALLFN(·call2048, 2048)
CALLFN(·call4096, 4096)
CALLFN(·call8192, 8192)
CALLFN(·call16384, 16384)
CALLFN(·call32768, 32768)
CALLFN(·call65536, 65536)
CALLFN(·call131072, 131072)
CALLFN(·call262144, 262144)
CALLFN(·call524288, 524288)
CALLFN(·call1048576, 1048576)
CALLFN(·call2097152, 2097152)
CALLFN(·call4194304, 4194304)
CALLFN(·call8388608, 8388608)
CALLFN(·call16777216, 16777216)
CALLFN(·call33554432, 33554432)
CALLFN(·call67108864, 67108864)
CALLFN(·call134217728, 134217728)
CALLFN(·call268435456, 268435456)
CALLFN(·call536870912, 536870912)
CALLFN(·call1073741824, 1073741824)
TEXT runtime·procyield(SB),NOSPLIT,$0-0
RET
// Save state of caller into g->sched.
// but using fake PC from systemstack_switch.
// Must only be called from functions with no locals ($0)
// or else unwinding from systemstack_switch is incorrect.
// Smashes R19.
TEXT gosave_systemstack_switch<>(SB),NOSPLIT|NOFRAME,$0
MOVV $runtime·systemstack_switch(SB), R19
ADDV $8, R19
MOVV R19, (g_sched+gobuf_pc)(g)
MOVV R3, (g_sched+gobuf_sp)(g)
MOVV R0, (g_sched+gobuf_lr)(g)
MOVV R0, (g_sched+gobuf_ret)(g)
// Assert ctxt is zero. See func save.
MOVV (g_sched+gobuf_ctxt)(g), R19
BEQ R19, 2(PC)
JAL runtime·abort(SB)
RET
// func asmcgocall(fn, arg unsafe.Pointer) int32
// Call fn(arg) on the scheduler stack,
// aligned appropriately for the gcc ABI.
// See cgocall.go for more details.
TEXT ·asmcgocall(SB),NOSPLIT,$0-20
MOVV fn+0(FP), R25
MOVV arg+8(FP), R4
MOVV R3, R12 // save original stack pointer
MOVV g, R13
// Figure out if we need to switch to m->g0 stack.
// We get called to create new OS threads too, and those
// come in on the m->g0 stack already.
MOVV g_m(g), R5
MOVV m_gsignal(R5), R6
BEQ R6, g, g0
MOVV m_g0(R5), R6
BEQ R6, g, g0
JAL gosave_systemstack_switch<>(SB)
MOVV R6, g
JAL runtime·save_g(SB)
MOVV (g_sched+gobuf_sp)(g), R3
// Now on a scheduling stack (a pthread-created stack).
g0:
// Save room for two of our pointers.
ADDV $-16, R3
MOVV R13, 0(R3) // save old g on stack
MOVV (g_stack+stack_hi)(R13), R13
SUBVU R12, R13
MOVV R13, 8(R3) // save depth in old g stack (can't just save SP, as stack might be copied during a callback)
JAL (R25)
// Restore g, stack pointer. R4 is return value.
MOVV 0(R3), g
JAL runtime·save_g(SB)
MOVV (g_stack+stack_hi)(g), R5
MOVV 8(R3), R6
SUBVU R6, R5
MOVV R5, R3
MOVW R4, ret+16(FP)
RET
// func cgocallback(fn, frame unsafe.Pointer, ctxt uintptr)
// See cgocall.go for more details.
TEXT ·cgocallback(SB),NOSPLIT,$24-24
NO_LOCAL_POINTERS
// Skip cgocallbackg, just dropm when fn is nil, and frame is the saved g.
// It is used to dropm while thread is exiting.
MOVV fn+0(FP), R5
BNE R5, loadg
// Restore the g from frame.
MOVV frame+8(FP), g
JMP dropm
loadg:
// Load m and g from thread-local storage.
MOVB runtime·iscgo(SB), R19
BEQ R19, nocgo
JAL runtime·load_g(SB)
nocgo:
// If g is nil, Go did not create the current thread,
// or if this thread never called into Go on pthread platforms.
// Call needm to obtain one for temporary use.
// In this case, we're running on the thread stack, so there's
// lots of space, but the linker doesn't know. Hide the call from
// the linker analysis by using an indirect call.
BEQ g, needm
MOVV g_m(g), R12
MOVV R12, savedm-8(SP)
JMP havem
needm:
MOVV g, savedm-8(SP) // g is zero, so is m.
MOVV $runtime·needAndBindM(SB), R4
JAL (R4)
// Set m->sched.sp = SP, so that if a panic happens
// during the function we are about to execute, it will
// have a valid SP to run on the g0 stack.
// The next few lines (after the havem label)
// will save this SP onto the stack and then write
// the same SP back to m->sched.sp. That seems redundant,
// but if an unrecovered panic happens, unwindm will
// restore the g->sched.sp from the stack location
// and then systemstack will try to use it. If we don't set it here,
// that restored SP will be uninitialized (typically 0) and
// will not be usable.
MOVV g_m(g), R12
MOVV m_g0(R12), R19
MOVV R3, (g_sched+gobuf_sp)(R19)
havem:
// Now there's a valid m, and we're running on its m->g0.
// Save current m->g0->sched.sp on stack and then set it to SP.
// Save current sp in m->g0->sched.sp in preparation for
// switch back to m->curg stack.
// NOTE: unwindm knows that the saved g->sched.sp is at 8(R29) aka savedsp-16(SP).
MOVV m_g0(R12), R19
MOVV (g_sched+gobuf_sp)(R19), R13
MOVV R13, savedsp-24(SP) // must match frame size
MOVV R3, (g_sched+gobuf_sp)(R19)
// Switch to m->curg stack and call runtime.cgocallbackg.
// Because we are taking over the execution of m->curg
// but *not* resuming what had been running, we need to
// save that information (m->curg->sched) so we can restore it.
// We can restore m->curg->sched.sp easily, because calling
// runtime.cgocallbackg leaves SP unchanged upon return.
// To save m->curg->sched.pc, we push it onto the stack.
// This has the added benefit that it looks to the traceback
// routine like cgocallbackg is going to return to that
// PC (because the frame we allocate below has the same
// size as cgocallback_gofunc's frame declared above)
// so that the traceback will seamlessly trace back into
// the earlier calls.
MOVV m_curg(R12), g
JAL runtime·save_g(SB)
MOVV (g_sched+gobuf_sp)(g), R13 // prepare stack as R13
MOVV (g_sched+gobuf_pc)(g), R4
MOVV R4, -(24+8)(R13) // "saved LR"; must match frame size
MOVV fn+0(FP), R5
MOVV frame+8(FP), R6
MOVV ctxt+16(FP), R7
MOVV $-(24+8)(R13), R3
MOVV R5, 8(R3)
MOVV R6, 16(R3)
MOVV R7, 24(R3)
JAL runtime·cgocallbackg(SB)
// Restore g->sched (== m->curg->sched) from saved values.
MOVV 0(R3), R4
MOVV R4, (g_sched+gobuf_pc)(g)
MOVV $(24+8)(R3), R13 // must match frame size
MOVV R13, (g_sched+gobuf_sp)(g)
// Switch back to m->g0's stack and restore m->g0->sched.sp.
// (Unlike m->curg, the g0 goroutine never uses sched.pc,
// so we do not have to restore it.)
MOVV g_m(g), R12
MOVV m_g0(R12), g
JAL runtime·save_g(SB)
MOVV (g_sched+gobuf_sp)(g), R3
MOVV savedsp-24(SP), R13 // must match frame size
MOVV R13, (g_sched+gobuf_sp)(g)
// If the m on entry was nil, we called needm above to borrow an m,
// 1. for the duration of the call on non-pthread platforms,
// 2. or the duration of the C thread alive on pthread platforms.
// If the m on entry wasn't nil,
// 1. the thread might be a Go thread,
// 2. or it wasn't the first call from a C thread on pthread platforms,
// since then we skip dropm to resue the m in the first call.
MOVV savedm-8(SP), R12
BNE R12, droppedm
// Skip dropm to reuse it in the next call, when a pthread key has been created.
MOVV _cgo_pthread_key_created(SB), R12
// It means cgo is disabled when _cgo_pthread_key_created is a nil pointer, need dropm.
BEQ R12, dropm
MOVV (R12), R12
BNE R12, droppedm
dropm:
MOVV $runtime·dropm(SB), R4
JAL (R4)
droppedm:
// Done!
RET
// void setg(G*); set g. for use by needm.
TEXT runtime·setg(SB), NOSPLIT, $0-8
MOVV gg+0(FP), g
// This only happens if iscgo, so jump straight to save_g
JAL runtime·save_g(SB)
RET
// void setg_gcc(G*); set g called from gcc with g in R19
TEXT setg_gcc<>(SB),NOSPLIT,$0-0
MOVV R19, g
JAL runtime·save_g(SB)
RET
TEXT runtime·abort(SB),NOSPLIT|NOFRAME,$0-0
MOVW (R0), R0
UNDEF
// AES hashing not implemented for loong64
TEXT runtime·memhash<ABIInternal>(SB),NOSPLIT|NOFRAME,$0-32
JMP runtime·memhashFallback<ABIInternal>(SB)
TEXT runtime·strhash<ABIInternal>(SB),NOSPLIT|NOFRAME,$0-24
JMP runtime·strhashFallback<ABIInternal>(SB)
TEXT runtime·memhash32<ABIInternal>(SB),NOSPLIT|NOFRAME,$0-24
JMP runtime·memhash32Fallback<ABIInternal>(SB)
TEXT runtime·memhash64<ABIInternal>(SB),NOSPLIT|NOFRAME,$0-24
JMP runtime·memhash64Fallback<ABIInternal>(SB)
TEXT runtime·return0(SB), NOSPLIT, $0
MOVW $0, R19
RET
// Called from cgo wrappers, this function returns g->m->curg.stack.hi.
// Must obey the gcc calling convention.
TEXT _cgo_topofstack(SB),NOSPLIT,$16
// g (R22) and REGTMP (R30) might be clobbered by load_g. They
// are callee-save in the gcc calling convention, so save them.
MOVV R30, savedREGTMP-16(SP)
MOVV g, savedG-8(SP)
JAL runtime·load_g(SB)
MOVV g_m(g), R19
MOVV m_curg(R19), R19
MOVV (g_stack+stack_hi)(R19), R4 // return value in R4
MOVV savedG-8(SP), g
MOVV savedREGTMP-16(SP), R30
RET
// The top-most function running on a goroutine
// returns to goexit+PCQuantum.
TEXT runtime·goexit(SB),NOSPLIT|NOFRAME|TOPFRAME,$0-0
NOOP
JAL runtime·goexit1(SB) // does not return
// traceback from goexit1 must hit code range of goexit
NOOP
// This is called from .init_array and follows the platform, not Go, ABI.
TEXT runtime·addmoduledata(SB),NOSPLIT,$0-0
ADDV $-0x10, R3
MOVV R30, 8(R3) // The access to global variables below implicitly uses R30, which is callee-save
MOVV runtime·lastmoduledatap(SB), R12
MOVV R4, moduledata_next(R12)
MOVV R4, runtime·lastmoduledatap(SB)
MOVV 8(R3), R30
ADDV $0x10, R3
RET
TEXT ·checkASM(SB),NOSPLIT,$0-1
MOVW $1, R19
MOVB R19, ret+0(FP)
RET
#ifdef GOEXPERIMENT_regabiargs
// spillArgs stores return values from registers to a *internal/abi.RegArgs in R25.
TEXT ·spillArgs(SB),NOSPLIT,$0-0
MOVV R4, (0*8)(R25)
MOVV R5, (1*8)(R25)
MOVV R6, (2*8)(R25)
MOVV R7, (3*8)(R25)
MOVV R8, (4*8)(R25)
MOVV R9, (5*8)(R25)
MOVV R10, (6*8)(R25)
MOVV R11, (7*8)(R25)
MOVV R12, (8*8)(R25)
MOVV R13, (9*8)(R25)
MOVV R14, (10*8)(R25)
MOVV R15, (11*8)(R25)
MOVV R16, (12*8)(R25)
MOVV R17, (13*8)(R25)
MOVV R18, (14*8)(R25)
MOVV R19, (15*8)(R25)
MOVD F0, (16*8)(R25)
MOVD F1, (17*8)(R25)
MOVD F2, (18*8)(R25)
MOVD F3, (19*8)(R25)
MOVD F4, (20*8)(R25)
MOVD F5, (21*8)(R25)
MOVD F6, (22*8)(R25)
MOVD F7, (23*8)(R25)
MOVD F8, (24*8)(R25)
MOVD F9, (25*8)(R25)
MOVD F10, (26*8)(R25)
MOVD F11, (27*8)(R25)
MOVD F12, (28*8)(R25)
MOVD F13, (29*8)(R25)
MOVD F14, (30*8)(R25)
MOVD F15, (31*8)(R25)
RET
// unspillArgs loads args into registers from a *internal/abi.RegArgs in R25.
TEXT ·unspillArgs(SB),NOSPLIT,$0-0
MOVV (0*8)(R25), R4
MOVV (1*8)(R25), R5
MOVV (2*8)(R25), R6
MOVV (3*8)(R25), R7
MOVV (4*8)(R25), R8
MOVV (5*8)(R25), R9
MOVV (6*8)(R25), R10
MOVV (7*8)(R25), R11
MOVV (8*8)(R25), R12
MOVV (9*8)(R25), R13
MOVV (10*8)(R25), R14
MOVV (11*8)(R25), R15
MOVV (12*8)(R25), R16
MOVV (13*8)(R25), R17
MOVV (14*8)(R25), R18
MOVV (15*8)(R25), R19
MOVD (16*8)(R25), F0
MOVD (17*8)(R25), F1
MOVD (18*8)(R25), F2
MOVD (19*8)(R25), F3
MOVD (20*8)(R25), F4
MOVD (21*8)(R25), F5
MOVD (22*8)(R25), F6
MOVD (23*8)(R25), F7
MOVD (24*8)(R25), F8
MOVD (25*8)(R25), F9
MOVD (26*8)(R25), F10
MOVD (27*8)(R25), F11
MOVD (28*8)(R25), F12
MOVD (29*8)(R25), F13
MOVD (30*8)(R25), F14
MOVD (31*8)(R25), F15
RET
#else
TEXT ·spillArgs(SB),NOSPLIT,$0-0
RET
TEXT ·unspillArgs(SB),NOSPLIT,$0-0
RET
#endif
// gcWriteBarrier informs the GC about heap pointer writes.
//
// gcWriteBarrier does NOT follow the Go ABI. It accepts the
// number of bytes of buffer needed in R29, and returns a pointer
// to the buffer space in R29.
// It clobbers R30 (the linker temp register).
// The act of CALLing gcWriteBarrier will clobber R1 (LR).
// It does not clobber any other general-purpose registers,
// but may clobber others (e.g., floating point registers).
TEXT gcWriteBarrier<>(SB),NOSPLIT,$216
// Save the registers clobbered by the fast path.
MOVV R19, 208(R3)
MOVV R13, 216(R3)
retry:
MOVV g_m(g), R19
MOVV m_p(R19), R19
MOVV (p_wbBuf+wbBuf_next)(R19), R13
MOVV (p_wbBuf+wbBuf_end)(R19), R30 // R30 is linker temp register
// Increment wbBuf.next position.
ADDV R29, R13
// Is the buffer full?
BLTU R30, R13, flush
// Commit to the larger buffer.
MOVV R13, (p_wbBuf+wbBuf_next)(R19)
// Make return value (the original next position)
SUBV R29, R13, R29
// Restore registers.
MOVV 208(R3), R19
MOVV 216(R3), R13
RET
flush:
// Save all general purpose registers since these could be
// clobbered by wbBufFlush and were not saved by the caller.
MOVV R27, 8(R3)
MOVV R28, 16(R3)
// R1 is LR, which was saved by the prologue.
MOVV R2, 24(R3)
// R3 is SP.
MOVV R4, 32(R3)
MOVV R5, 40(R3)
MOVV R6, 48(R3)
MOVV R7, 56(R3)
MOVV R8, 64(R3)
MOVV R9, 72(R3)
MOVV R10, 80(R3)
MOVV R11, 88(R3)
MOVV R12, 96(R3)
// R13 already saved
MOVV R14, 104(R3)
MOVV R15, 112(R3)
MOVV R16, 120(R3)
MOVV R17, 128(R3)
MOVV R18, 136(R3)
// R19 already saved
MOVV R20, 144(R3)
MOVV R21, 152(R3)
// R22 is g.
MOVV R23, 160(R3)
MOVV R24, 168(R3)
MOVV R25, 176(R3)
MOVV R26, 184(R3)
// R27 already saved
// R28 already saved.
MOVV R29, 192(R3)
// R30 is tmp register.
MOVV R31, 200(R3)
CALL runtime·wbBufFlush(SB)
MOVV 8(R3), R27
MOVV 16(R3), R28
MOVV 24(R3), R2
MOVV 32(R3), R4
MOVV 40(R3), R5
MOVV 48(R3), R6
MOVV 56(R3), R7
MOVV 64(R3), R8
MOVV 72(R3), R9
MOVV 80(R3), R10
MOVV 88(R3), R11
MOVV 96(R3), R12
MOVV 104(R3), R14
MOVV 112(R3), R15
MOVV 120(R3), R16
MOVV 128(R3), R17
MOVV 136(R3), R18
MOVV 144(R3), R20
MOVV 152(R3), R21
MOVV 160(R3), R23
MOVV 168(R3), R24
MOVV 176(R3), R25
MOVV 184(R3), R26
MOVV 192(R3), R29
MOVV 200(R3), R31
JMP retry
TEXT runtime·gcWriteBarrier1<ABIInternal>(SB),NOSPLIT,$0
MOVV $8, R29
JMP gcWriteBarrier<>(SB)
TEXT runtime·gcWriteBarrier2<ABIInternal>(SB),NOSPLIT,$0
MOVV $16, R29
JMP gcWriteBarrier<>(SB)
TEXT runtime·gcWriteBarrier3<ABIInternal>(SB),NOSPLIT,$0
MOVV $24, R29
JMP gcWriteBarrier<>(SB)
TEXT runtime·gcWriteBarrier4<ABIInternal>(SB),NOSPLIT,$0
MOVV $32, R29
JMP gcWriteBarrier<>(SB)
TEXT runtime·gcWriteBarrier5<ABIInternal>(SB),NOSPLIT,$0
MOVV $40, R29
JMP gcWriteBarrier<>(SB)
TEXT runtime·gcWriteBarrier6<ABIInternal>(SB),NOSPLIT,$0
MOVV $48, R29
JMP gcWriteBarrier<>(SB)
TEXT runtime·gcWriteBarrier7<ABIInternal>(SB),NOSPLIT,$0
MOVV $56, R29
JMP gcWriteBarrier<>(SB)
TEXT runtime·gcWriteBarrier8<ABIInternal>(SB),NOSPLIT,$0
MOVV $64, R29
JMP gcWriteBarrier<>(SB)
// Note: these functions use a special calling convention to save generated code space.
// Arguments are passed in registers, but the space for those arguments are allocated
// in the caller's stack frame. These stubs write the args into that stack space and
// then tail call to the corresponding runtime handler.
// The tail call makes these stubs disappear in backtraces.
TEXT runtime·panicIndex<ABIInternal>(SB),NOSPLIT,$0-16
#ifdef GOEXPERIMENT_regabiargs
MOVV R20, R4
MOVV R21, R5
#else
MOVV R20, x+0(FP)
MOVV R21, y+8(FP)
#endif
JMP runtime·goPanicIndex<ABIInternal>(SB)
TEXT runtime·panicIndexU<ABIInternal>(SB),NOSPLIT,$0-16
#ifdef GOEXPERIMENT_regabiargs
MOVV R20, R4
MOVV R21, R5
#else
MOVV R20, x+0(FP)
MOVV R21, y+8(FP)
#endif
JMP runtime·goPanicIndexU<ABIInternal>(SB)
TEXT runtime·panicSliceAlen<ABIInternal>(SB),NOSPLIT,$0-16
#ifdef GOEXPERIMENT_regabiargs
MOVV R21, R4
MOVV R23, R5
#else
MOVV R21, x+0(FP)
MOVV R23, y+8(FP)
#endif
JMP runtime·goPanicSliceAlen<ABIInternal>(SB)
TEXT runtime·panicSliceAlenU<ABIInternal>(SB),NOSPLIT,$0-16
#ifdef GOEXPERIMENT_regabiargs
MOVV R21, R4
MOVV R23, R5
#else
MOVV R21, x+0(FP)
MOVV R23, y+8(FP)
#endif
JMP runtime·goPanicSliceAlenU<ABIInternal>(SB)
TEXT runtime·panicSliceAcap<ABIInternal>(SB),NOSPLIT,$0-16
#ifdef GOEXPERIMENT_regabiargs
MOVV R21, R4
MOVV R23, R5
#else
MOVV R21, x+0(FP)
MOVV R23, y+8(FP)
#endif
JMP runtime·goPanicSliceAcap<ABIInternal>(SB)
TEXT runtime·panicSliceAcapU<ABIInternal>(SB),NOSPLIT,$0-16
#ifdef GOEXPERIMENT_regabiargs
MOVV R21, R4
MOVV R23, R5
#else
MOVV R21, x+0(FP)
MOVV R23, y+8(FP)
#endif
JMP runtime·goPanicSliceAcapU<ABIInternal>(SB)
TEXT runtime·panicSliceB<ABIInternal>(SB),NOSPLIT,$0-16
#ifdef GOEXPERIMENT_regabiargs
MOVV R20, R4
MOVV R21, R5
#else
MOVV R20, x+0(FP)
MOVV R21, y+8(FP)
#endif
JMP runtime·goPanicSliceB<ABIInternal>(SB)
TEXT runtime·panicSliceBU<ABIInternal>(SB),NOSPLIT,$0-16
#ifdef GOEXPERIMENT_regabiargs
MOVV R20, R4
MOVV R21, R5
#else
MOVV R20, x+0(FP)
MOVV R21, y+8(FP)
#endif
JMP runtime·goPanicSliceBU<ABIInternal>(SB)
TEXT runtime·panicSlice3Alen<ABIInternal>(SB),NOSPLIT,$0-16
#ifdef GOEXPERIMENT_regabiargs
MOVV R23, R4
MOVV R24, R5
#else
MOVV R23, x+0(FP)
MOVV R24, y+8(FP)
#endif
JMP runtime·goPanicSlice3Alen<ABIInternal>(SB)
TEXT runtime·panicSlice3AlenU<ABIInternal>(SB),NOSPLIT,$0-16
#ifdef GOEXPERIMENT_regabiargs
MOVV R23, R4
MOVV R24, R5
#else
MOVV R23, x+0(FP)
MOVV R24, y+8(FP)
#endif
JMP runtime·goPanicSlice3AlenU<ABIInternal>(SB)
TEXT runtime·panicSlice3Acap<ABIInternal>(SB),NOSPLIT,$0-16
#ifdef GOEXPERIMENT_regabiargs
MOVV R23, R4
MOVV R24, R5
#else
MOVV R23, x+0(FP)
MOVV R24, y+8(FP)
#endif
JMP runtime·goPanicSlice3Acap<ABIInternal>(SB)
TEXT runtime·panicSlice3AcapU<ABIInternal>(SB),NOSPLIT,$0-16
#ifdef GOEXPERIMENT_regabiargs
MOVV R23, R4
MOVV R24, R5
#else
MOVV R23, x+0(FP)
MOVV R24, y+8(FP)
#endif
JMP runtime·goPanicSlice3AcapU<ABIInternal>(SB)
TEXT runtime·panicSlice3B<ABIInternal>(SB),NOSPLIT,$0-16
#ifdef GOEXPERIMENT_regabiargs
MOVV R21, R4
MOVV R23, R5
#else
MOVV R21, x+0(FP)
MOVV R23, y+8(FP)
#endif
JMP runtime·goPanicSlice3B<ABIInternal>(SB)
TEXT runtime·panicSlice3BU<ABIInternal>(SB),NOSPLIT,$0-16
#ifdef GOEXPERIMENT_regabiargs
MOVV R21, R4
MOVV R23, R5
#else
MOVV R21, x+0(FP)
MOVV R23, y+8(FP)
#endif
JMP runtime·goPanicSlice3BU<ABIInternal>(SB)
TEXT runtime·panicSlice3C<ABIInternal>(SB),NOSPLIT,$0-16
#ifdef GOEXPERIMENT_regabiargs
MOVV R20, R4
MOVV R21, R5
#else
MOVV R20, x+0(FP)
MOVV R21, y+8(FP)
#endif
JMP runtime·goPanicSlice3C<ABIInternal>(SB)
TEXT runtime·panicSlice3CU<ABIInternal>(SB),NOSPLIT,$0-16
#ifdef GOEXPERIMENT_regabiargs
MOVV R20, R4
MOVV R21, R5
#else
MOVV R20, x+0(FP)
MOVV R21, y+8(FP)
#endif
JMP runtime·goPanicSlice3CU<ABIInternal>(SB)
TEXT runtime·panicSliceConvert<ABIInternal>(SB),NOSPLIT,$0-16
#ifdef GOEXPERIMENT_regabiargs
MOVV R23, R4
MOVV R24, R5
#else
MOVV R23, x+0(FP)
MOVV R24, y+8(FP)
#endif
JMP runtime·goPanicSliceConvert<ABIInternal>(SB)