blob: 3d0b74ce926e34996dba96b611a8ac001691ac5d [file] [log] [blame]
// Copyright 2009 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
#include "go_asm.h"
#include "go_tls.h"
#include "funcdata.h"
#include "textflag.h"
TEXT runtime·rt0_go(SB),NOSPLIT,$0
// copy arguments forward on an even stack
MOVL argc+0(FP), AX
MOVL argv+4(FP), BX
SUBL $128, SP // plenty of scratch
ANDL $~15, SP
MOVL AX, 120(SP) // save argc, argv away
MOVL BX, 124(SP)
// set default stack bounds.
// _cgo_init may update stackguard.
MOVL $runtime·g0(SB), BP
LEAL (-64*1024+104)(SP), BX
MOVL BX, g_stackguard0(BP)
MOVL BX, g_stackguard1(BP)
MOVL BX, (g_stack+stack_lo)(BP)
MOVL SP, (g_stack+stack_hi)(BP)
// find out information about the processor we're on
#ifdef GOOS_nacl // NaCl doesn't like PUSHFL/POPFL
JMP has_cpuid
#else
// first see if CPUID instruction is supported.
PUSHFL
PUSHFL
XORL $(1<<21), 0(SP) // flip ID bit
POPFL
PUSHFL
POPL AX
XORL 0(SP), AX
POPFL // restore EFLAGS
TESTL $(1<<21), AX
JNE has_cpuid
#endif
bad_proc: // show that the program requires MMX.
MOVL $2, 0(SP)
MOVL $bad_proc_msg<>(SB), 4(SP)
MOVL $0x3d, 8(SP)
CALL runtime·write(SB)
MOVL $1, 0(SP)
CALL runtime·exit(SB)
INT $3
has_cpuid:
MOVL $0, AX
CPUID
MOVL AX, SI
CMPL AX, $0
JE nocpuinfo
// Figure out how to serialize RDTSC.
// On Intel processors LFENCE is enough. AMD requires MFENCE.
// Don't know about the rest, so let's do MFENCE.
CMPL BX, $0x756E6547 // "Genu"
JNE notintel
CMPL DX, $0x49656E69 // "ineI"
JNE notintel
CMPL CX, $0x6C65746E // "ntel"
JNE notintel
MOVB $1, runtime·lfenceBeforeRdtsc(SB)
notintel:
// Load EAX=1 cpuid flags
MOVL $1, AX
CPUID
MOVL CX, AX // Move to global variable clobbers CX when generating PIC
MOVL AX, runtime·cpuid_ecx(SB)
MOVL DX, runtime·cpuid_edx(SB)
// Check for MMX support
TESTL $(1<<23), DX // MMX
JZ bad_proc
// Load EAX=7/ECX=0 cpuid flags
CMPL SI, $7
JLT nocpuinfo
MOVL $7, AX
MOVL $0, CX
CPUID
MOVL BX, runtime·cpuid_ebx7(SB)
nocpuinfo:
// if there is an _cgo_init, call it to let it
// initialize and to set up GS. if not,
// we set up GS ourselves.
MOVL _cgo_init(SB), AX
TESTL AX, AX
JZ needtls
MOVL $setg_gcc<>(SB), BX
MOVL BX, 4(SP)
MOVL BP, 0(SP)
CALL AX
// update stackguard after _cgo_init
MOVL $runtime·g0(SB), CX
MOVL (g_stack+stack_lo)(CX), AX
ADDL $const__StackGuard, AX
MOVL AX, g_stackguard0(CX)
MOVL AX, g_stackguard1(CX)
#ifndef GOOS_windows
// skip runtime·ldt0setup(SB) and tls test after _cgo_init for non-windows
JMP ok
#endif
needtls:
#ifdef GOOS_plan9
// skip runtime·ldt0setup(SB) and tls test on Plan 9 in all cases
JMP ok
#endif
// set up %gs
CALL runtime·ldt0setup(SB)
// store through it, to make sure it works
get_tls(BX)
MOVL $0x123, g(BX)
MOVL runtime·m0+m_tls(SB), AX
CMPL AX, $0x123
JEQ ok
MOVL AX, 0 // abort
ok:
// set up m and g "registers"
get_tls(BX)
LEAL runtime·g0(SB), DX
MOVL DX, g(BX)
LEAL runtime·m0(SB), AX
// save m->g0 = g0
MOVL DX, m_g0(AX)
// save g0->m = m0
MOVL AX, g_m(DX)
CALL runtime·emptyfunc(SB) // fault if stack check is wrong
// convention is D is always cleared
CLD
CALL runtime·check(SB)
// saved argc, argv
MOVL 120(SP), AX
MOVL AX, 0(SP)
MOVL 124(SP), AX
MOVL AX, 4(SP)
CALL runtime·args(SB)
CALL runtime·osinit(SB)
CALL runtime·schedinit(SB)
// create a new goroutine to start program
PUSHL $runtime·mainPC(SB) // entry
PUSHL $0 // arg size
CALL runtime·newproc(SB)
POPL AX
POPL AX
// start this M
CALL runtime·mstart(SB)
INT $3
RET
DATA bad_proc_msg<>+0x00(SB)/8, $"This pro"
DATA bad_proc_msg<>+0x08(SB)/8, $"gram can"
DATA bad_proc_msg<>+0x10(SB)/8, $" only be"
DATA bad_proc_msg<>+0x18(SB)/8, $" run on "
DATA bad_proc_msg<>+0x20(SB)/8, $"processo"
DATA bad_proc_msg<>+0x28(SB)/8, $"rs with "
DATA bad_proc_msg<>+0x30(SB)/8, $"MMX supp"
DATA bad_proc_msg<>+0x38(SB)/4, $"ort."
DATA bad_proc_msg<>+0x3c(SB)/1, $0xa
GLOBL bad_proc_msg<>(SB), RODATA, $0x3d
DATA runtime·mainPC+0(SB)/4,$runtime·main(SB)
GLOBL runtime·mainPC(SB),RODATA,$4
TEXT runtime·breakpoint(SB),NOSPLIT,$0-0
INT $3
RET
TEXT runtime·asminit(SB),NOSPLIT,$0-0
// Linux and MinGW start the FPU in extended double precision.
// Other operating systems use double precision.
// Change to double precision to match them,
// and to match other hardware that only has double.
FLDCW runtime·controlWord64(SB)
RET
/*
* go-routine
*/
// void gosave(Gobuf*)
// save state in Gobuf; setjmp
TEXT runtime·gosave(SB), NOSPLIT, $0-4
MOVL buf+0(FP), AX // gobuf
LEAL buf+0(FP), BX // caller's SP
MOVL BX, gobuf_sp(AX)
MOVL 0(SP), BX // caller's PC
MOVL BX, gobuf_pc(AX)
MOVL $0, gobuf_ret(AX)
// Assert ctxt is zero. See func save.
MOVL gobuf_ctxt(AX), BX
TESTL BX, BX
JZ 2(PC)
CALL runtime·badctxt(SB)
get_tls(CX)
MOVL g(CX), BX
MOVL BX, gobuf_g(AX)
RET
// void gogo(Gobuf*)
// restore state from Gobuf; longjmp
TEXT runtime·gogo(SB), NOSPLIT, $8-4
MOVL buf+0(FP), BX // gobuf
// If ctxt is not nil, invoke deletion barrier before overwriting.
MOVL gobuf_ctxt(BX), DX
TESTL DX, DX
JZ nilctxt
LEAL gobuf_ctxt(BX), AX
MOVL AX, 0(SP)
MOVL $0, 4(SP)
CALL runtime·writebarrierptr_prewrite(SB)
MOVL buf+0(FP), BX
nilctxt:
MOVL gobuf_g(BX), DX
MOVL 0(DX), CX // make sure g != nil
get_tls(CX)
MOVL DX, g(CX)
MOVL gobuf_sp(BX), SP // restore SP
MOVL gobuf_ret(BX), AX
MOVL gobuf_ctxt(BX), DX
MOVL $0, gobuf_sp(BX) // clear to help garbage collector
MOVL $0, gobuf_ret(BX)
MOVL $0, gobuf_ctxt(BX)
MOVL gobuf_pc(BX), BX
JMP BX
// func mcall(fn func(*g))
// Switch to m->g0's stack, call fn(g).
// Fn must never return. It should gogo(&g->sched)
// to keep running g.
TEXT runtime·mcall(SB), NOSPLIT, $0-4
MOVL fn+0(FP), DI
get_tls(DX)
MOVL g(DX), AX // save state in g->sched
MOVL 0(SP), BX // caller's PC
MOVL BX, (g_sched+gobuf_pc)(AX)
LEAL fn+0(FP), BX // caller's SP
MOVL BX, (g_sched+gobuf_sp)(AX)
MOVL AX, (g_sched+gobuf_g)(AX)
// switch to m->g0 & its stack, call fn
MOVL g(DX), BX
MOVL g_m(BX), BX
MOVL m_g0(BX), SI
CMPL SI, AX // if g == m->g0 call badmcall
JNE 3(PC)
MOVL $runtime·badmcall(SB), AX
JMP AX
MOVL SI, g(DX) // g = m->g0
MOVL (g_sched+gobuf_sp)(SI), SP // sp = m->g0->sched.sp
PUSHL AX
MOVL DI, DX
MOVL 0(DI), DI
CALL DI
POPL AX
MOVL $runtime·badmcall2(SB), AX
JMP AX
RET
// systemstack_switch is a dummy routine that systemstack leaves at the bottom
// of the G stack. We need to distinguish the routine that
// lives at the bottom of the G stack from the one that lives
// at the top of the system stack because the one at the top of
// the system stack terminates the stack walk (see topofstack()).
TEXT runtime·systemstack_switch(SB), NOSPLIT, $0-0
RET
// func systemstack(fn func())
TEXT runtime·systemstack(SB), NOSPLIT, $0-4
MOVL fn+0(FP), DI // DI = fn
get_tls(CX)
MOVL g(CX), AX // AX = g
MOVL g_m(AX), BX // BX = m
MOVL m_gsignal(BX), DX // DX = gsignal
CMPL AX, DX
JEQ noswitch
MOVL m_g0(BX), DX // DX = g0
CMPL AX, DX
JEQ noswitch
MOVL m_curg(BX), BP
CMPL AX, BP
JEQ switch
// Bad: g is not gsignal, not g0, not curg. What is it?
// Hide call from linker nosplit analysis.
MOVL $runtime·badsystemstack(SB), AX
CALL AX
switch:
// save our state in g->sched. Pretend to
// be systemstack_switch if the G stack is scanned.
MOVL $runtime·systemstack_switch(SB), (g_sched+gobuf_pc)(AX)
MOVL SP, (g_sched+gobuf_sp)(AX)
MOVL AX, (g_sched+gobuf_g)(AX)
// switch to g0
get_tls(CX)
MOVL DX, g(CX)
MOVL (g_sched+gobuf_sp)(DX), BX
// make it look like mstart called systemstack on g0, to stop traceback
SUBL $4, BX
MOVL $runtime·mstart(SB), DX
MOVL DX, 0(BX)
MOVL BX, SP
// call target function
MOVL DI, DX
MOVL 0(DI), DI
CALL DI
// switch back to g
get_tls(CX)
MOVL g(CX), AX
MOVL g_m(AX), BX
MOVL m_curg(BX), AX
MOVL AX, g(CX)
MOVL (g_sched+gobuf_sp)(AX), SP
MOVL $0, (g_sched+gobuf_sp)(AX)
RET
noswitch:
// already on system stack, just call directly
MOVL DI, DX
MOVL 0(DI), DI
CALL DI
RET
/*
* support for morestack
*/
// Called during function prolog when more stack is needed.
//
// The traceback routines see morestack on a g0 as being
// the top of a stack (for example, morestack calling newstack
// calling the scheduler calling newm calling gc), so we must
// record an argument size. For that purpose, it has no arguments.
TEXT runtime·morestack(SB),NOSPLIT,$0-0
// Cannot grow scheduler stack (m->g0).
get_tls(CX)
MOVL g(CX), BX
MOVL g_m(BX), BX
MOVL m_g0(BX), SI
CMPL g(CX), SI
JNE 3(PC)
CALL runtime·badmorestackg0(SB)
INT $3
// Cannot grow signal stack.
MOVL m_gsignal(BX), SI
CMPL g(CX), SI
JNE 3(PC)
CALL runtime·badmorestackgsignal(SB)
INT $3
// Called from f.
// Set m->morebuf to f's caller.
MOVL 4(SP), DI // f's caller's PC
MOVL DI, (m_morebuf+gobuf_pc)(BX)
LEAL 8(SP), CX // f's caller's SP
MOVL CX, (m_morebuf+gobuf_sp)(BX)
get_tls(CX)
MOVL g(CX), SI
MOVL SI, (m_morebuf+gobuf_g)(BX)
// Set g->sched to context in f.
MOVL 0(SP), AX // f's PC
MOVL AX, (g_sched+gobuf_pc)(SI)
MOVL SI, (g_sched+gobuf_g)(SI)
LEAL 4(SP), AX // f's SP
MOVL AX, (g_sched+gobuf_sp)(SI)
// newstack will fill gobuf.ctxt.
// Call newstack on m->g0's stack.
MOVL m_g0(BX), BP
MOVL BP, g(CX)
MOVL (g_sched+gobuf_sp)(BP), AX
MOVL -4(AX), BX // fault if CALL would, before smashing SP
MOVL AX, SP
PUSHL DX // ctxt argument
CALL runtime·newstack(SB)
MOVL $0, 0x1003 // crash if newstack returns
POPL DX // keep balance check happy
RET
TEXT runtime·morestack_noctxt(SB),NOSPLIT,$0-0
MOVL $0, DX
JMP runtime·morestack(SB)
TEXT runtime·stackBarrier(SB),NOSPLIT,$0
// We came here via a RET to an overwritten return PC.
// AX may be live. Other registers are available.
// Get the original return PC, g.stkbar[g.stkbarPos].savedLRVal.
get_tls(CX)
MOVL g(CX), CX
MOVL (g_stkbar+slice_array)(CX), DX
MOVL g_stkbarPos(CX), BX
IMULL $stkbar__size, BX // Too big for SIB.
MOVL stkbar_savedLRVal(DX)(BX*1), BX
// Record that this stack barrier was hit.
ADDL $1, g_stkbarPos(CX)
// Jump to the original return PC.
JMP BX
// reflectcall: call a function with the given argument list
// func call(argtype *_type, f *FuncVal, arg *byte, argsize, retoffset uint32).
// we don't have variable-sized frames, so we use a small number
// of constant-sized-frame functions to encode a few bits of size in the pc.
// Caution: ugly multiline assembly macros in your future!
#define DISPATCH(NAME,MAXSIZE) \
CMPL CX, $MAXSIZE; \
JA 3(PC); \
MOVL $NAME(SB), AX; \
JMP AX
// Note: can't just "JMP NAME(SB)" - bad inlining results.
TEXT reflect·call(SB), NOSPLIT, $0-0
JMP ·reflectcall(SB)
TEXT ·reflectcall(SB), NOSPLIT, $0-20
MOVL argsize+12(FP), CX
DISPATCH(runtime·call16, 16)
DISPATCH(runtime·call32, 32)
DISPATCH(runtime·call64, 64)
DISPATCH(runtime·call128, 128)
DISPATCH(runtime·call256, 256)
DISPATCH(runtime·call512, 512)
DISPATCH(runtime·call1024, 1024)
DISPATCH(runtime·call2048, 2048)
DISPATCH(runtime·call4096, 4096)
DISPATCH(runtime·call8192, 8192)
DISPATCH(runtime·call16384, 16384)
DISPATCH(runtime·call32768, 32768)
DISPATCH(runtime·call65536, 65536)
DISPATCH(runtime·call131072, 131072)
DISPATCH(runtime·call262144, 262144)
DISPATCH(runtime·call524288, 524288)
DISPATCH(runtime·call1048576, 1048576)
DISPATCH(runtime·call2097152, 2097152)
DISPATCH(runtime·call4194304, 4194304)
DISPATCH(runtime·call8388608, 8388608)
DISPATCH(runtime·call16777216, 16777216)
DISPATCH(runtime·call33554432, 33554432)
DISPATCH(runtime·call67108864, 67108864)
DISPATCH(runtime·call134217728, 134217728)
DISPATCH(runtime·call268435456, 268435456)
DISPATCH(runtime·call536870912, 536870912)
DISPATCH(runtime·call1073741824, 1073741824)
MOVL $runtime·badreflectcall(SB), AX
JMP AX
#define CALLFN(NAME,MAXSIZE) \
TEXT NAME(SB), WRAPPER, $MAXSIZE-20; \
NO_LOCAL_POINTERS; \
/* copy arguments to stack */ \
MOVL argptr+8(FP), SI; \
MOVL argsize+12(FP), CX; \
MOVL SP, DI; \
REP;MOVSB; \
/* call function */ \
MOVL f+4(FP), DX; \
MOVL (DX), AX; \
PCDATA $PCDATA_StackMapIndex, $0; \
CALL AX; \
/* copy return values back */ \
MOVL argtype+0(FP), DX; \
MOVL argptr+8(FP), DI; \
MOVL argsize+12(FP), CX; \
MOVL retoffset+16(FP), BX; \
MOVL SP, SI; \
ADDL BX, DI; \
ADDL BX, SI; \
SUBL BX, CX; \
CALL callRet<>(SB); \
RET
// callRet copies return values back at the end of call*. This is a
// separate function so it can allocate stack space for the arguments
// to reflectcallmove. It does not follow the Go ABI; it expects its
// arguments in registers.
TEXT callRet<>(SB), NOSPLIT, $16-0
MOVL DX, 0(SP)
MOVL DI, 4(SP)
MOVL SI, 8(SP)
MOVL CX, 12(SP)
CALL runtime·reflectcallmove(SB)
RET
CALLFN(·call16, 16)
CALLFN(·call32, 32)
CALLFN(·call64, 64)
CALLFN(·call128, 128)
CALLFN(·call256, 256)
CALLFN(·call512, 512)
CALLFN(·call1024, 1024)
CALLFN(·call2048, 2048)
CALLFN(·call4096, 4096)
CALLFN(·call8192, 8192)
CALLFN(·call16384, 16384)
CALLFN(·call32768, 32768)
CALLFN(·call65536, 65536)
CALLFN(·call131072, 131072)
CALLFN(·call262144, 262144)
CALLFN(·call524288, 524288)
CALLFN(·call1048576, 1048576)
CALLFN(·call2097152, 2097152)
CALLFN(·call4194304, 4194304)
CALLFN(·call8388608, 8388608)
CALLFN(·call16777216, 16777216)
CALLFN(·call33554432, 33554432)
CALLFN(·call67108864, 67108864)
CALLFN(·call134217728, 134217728)
CALLFN(·call268435456, 268435456)
CALLFN(·call536870912, 536870912)
CALLFN(·call1073741824, 1073741824)
TEXT runtime·procyield(SB),NOSPLIT,$0-0
MOVL cycles+0(FP), AX
again:
PAUSE
SUBL $1, AX
JNZ again
RET
TEXT ·publicationBarrier(SB),NOSPLIT,$0-0
// Stores are already ordered on x86, so this is just a
// compile barrier.
RET
// void jmpdefer(fn, sp);
// called from deferreturn.
// 1. pop the caller
// 2. sub 5 bytes (the length of CALL & a 32 bit displacement) from the callers
// return (when building for shared libraries, subtract 16 bytes -- 5 bytes
// for CALL & displacement to call __x86.get_pc_thunk.cx, 6 bytes for the
// LEAL to load the offset into BX, and finally 5 for the call & displacement)
// 3. jmp to the argument
TEXT runtime·jmpdefer(SB), NOSPLIT, $0-8
MOVL fv+0(FP), DX // fn
MOVL argp+4(FP), BX // caller sp
LEAL -4(BX), SP // caller sp after CALL
#ifdef GOBUILDMODE_shared
SUBL $16, (SP) // return to CALL again
#else
SUBL $5, (SP) // return to CALL again
#endif
MOVL 0(DX), BX
JMP BX // but first run the deferred function
// Save state of caller into g->sched.
TEXT gosave<>(SB),NOSPLIT,$0
PUSHL AX
PUSHL BX
get_tls(BX)
MOVL g(BX), BX
LEAL arg+0(FP), AX
MOVL AX, (g_sched+gobuf_sp)(BX)
MOVL -4(AX), AX
MOVL AX, (g_sched+gobuf_pc)(BX)
MOVL $0, (g_sched+gobuf_ret)(BX)
// Assert ctxt is zero. See func save.
MOVL (g_sched+gobuf_ctxt)(BX), AX
TESTL AX, AX
JZ 2(PC)
CALL runtime·badctxt(SB)
POPL BX
POPL AX
RET
// func asmcgocall(fn, arg unsafe.Pointer) int32
// Call fn(arg) on the scheduler stack,
// aligned appropriately for the gcc ABI.
// See cgocall.go for more details.
TEXT ·asmcgocall(SB),NOSPLIT,$0-12
MOVL fn+0(FP), AX
MOVL arg+4(FP), BX
MOVL SP, DX
// Figure out if we need to switch to m->g0 stack.
// We get called to create new OS threads too, and those
// come in on the m->g0 stack already.
get_tls(CX)
MOVL g(CX), BP
MOVL g_m(BP), BP
MOVL m_g0(BP), SI
MOVL g(CX), DI
CMPL SI, DI
JEQ noswitch
CALL gosave<>(SB)
get_tls(CX)
MOVL SI, g(CX)
MOVL (g_sched+gobuf_sp)(SI), SP
noswitch:
// Now on a scheduling stack (a pthread-created stack).
SUBL $32, SP
ANDL $~15, SP // alignment, perhaps unnecessary
MOVL DI, 8(SP) // save g
MOVL (g_stack+stack_hi)(DI), DI
SUBL DX, DI
MOVL DI, 4(SP) // save depth in stack (can't just save SP, as stack might be copied during a callback)
MOVL BX, 0(SP) // first argument in x86-32 ABI
CALL AX
// Restore registers, g, stack pointer.
get_tls(CX)
MOVL 8(SP), DI
MOVL (g_stack+stack_hi)(DI), SI
SUBL 4(SP), SI
MOVL DI, g(CX)
MOVL SI, SP
MOVL AX, ret+8(FP)
RET
// cgocallback(void (*fn)(void*), void *frame, uintptr framesize, uintptr ctxt)
// Turn the fn into a Go func (by taking its address) and call
// cgocallback_gofunc.
TEXT runtime·cgocallback(SB),NOSPLIT,$16-16
LEAL fn+0(FP), AX
MOVL AX, 0(SP)
MOVL frame+4(FP), AX
MOVL AX, 4(SP)
MOVL framesize+8(FP), AX
MOVL AX, 8(SP)
MOVL ctxt+12(FP), AX
MOVL AX, 12(SP)
MOVL $runtime·cgocallback_gofunc(SB), AX
CALL AX
RET
// cgocallback_gofunc(FuncVal*, void *frame, uintptr framesize, uintptr ctxt)
// See cgocall.go for more details.
TEXT ·cgocallback_gofunc(SB),NOSPLIT,$12-16
NO_LOCAL_POINTERS
// If g is nil, Go did not create the current thread.
// Call needm to obtain one for temporary use.
// In this case, we're running on the thread stack, so there's
// lots of space, but the linker doesn't know. Hide the call from
// the linker analysis by using an indirect call through AX.
get_tls(CX)
#ifdef GOOS_windows
MOVL $0, BP
CMPL CX, $0
JEQ 2(PC) // TODO
#endif
MOVL g(CX), BP
CMPL BP, $0
JEQ needm
MOVL g_m(BP), BP
MOVL BP, DX // saved copy of oldm
JMP havem
needm:
MOVL $0, 0(SP)
MOVL $runtime·needm(SB), AX
CALL AX
MOVL 0(SP), DX
get_tls(CX)
MOVL g(CX), BP
MOVL g_m(BP), BP
// Set m->sched.sp = SP, so that if a panic happens
// during the function we are about to execute, it will
// have a valid SP to run on the g0 stack.
// The next few lines (after the havem label)
// will save this SP onto the stack and then write
// the same SP back to m->sched.sp. That seems redundant,
// but if an unrecovered panic happens, unwindm will
// restore the g->sched.sp from the stack location
// and then systemstack will try to use it. If we don't set it here,
// that restored SP will be uninitialized (typically 0) and
// will not be usable.
MOVL m_g0(BP), SI
MOVL SP, (g_sched+gobuf_sp)(SI)
havem:
// Now there's a valid m, and we're running on its m->g0.
// Save current m->g0->sched.sp on stack and then set it to SP.
// Save current sp in m->g0->sched.sp in preparation for
// switch back to m->curg stack.
// NOTE: unwindm knows that the saved g->sched.sp is at 0(SP).
MOVL m_g0(BP), SI
MOVL (g_sched+gobuf_sp)(SI), AX
MOVL AX, 0(SP)
MOVL SP, (g_sched+gobuf_sp)(SI)
// Switch to m->curg stack and call runtime.cgocallbackg.
// Because we are taking over the execution of m->curg
// but *not* resuming what had been running, we need to
// save that information (m->curg->sched) so we can restore it.
// We can restore m->curg->sched.sp easily, because calling
// runtime.cgocallbackg leaves SP unchanged upon return.
// To save m->curg->sched.pc, we push it onto the stack.
// This has the added benefit that it looks to the traceback
// routine like cgocallbackg is going to return to that
// PC (because the frame we allocate below has the same
// size as cgocallback_gofunc's frame declared above)
// so that the traceback will seamlessly trace back into
// the earlier calls.
//
// In the new goroutine, 4(SP) holds the saved oldm (DX) register.
// 8(SP) is unused.
MOVL m_curg(BP), SI
MOVL SI, g(CX)
MOVL (g_sched+gobuf_sp)(SI), DI // prepare stack as DI
MOVL (g_sched+gobuf_pc)(SI), BP
MOVL BP, -4(DI)
MOVL ctxt+12(FP), CX
LEAL -(4+12)(DI), SP
MOVL DX, 4(SP)
MOVL CX, 0(SP)
CALL runtime·cgocallbackg(SB)
MOVL 4(SP), DX
// Restore g->sched (== m->curg->sched) from saved values.
get_tls(CX)
MOVL g(CX), SI
MOVL 12(SP), BP
MOVL BP, (g_sched+gobuf_pc)(SI)
LEAL (12+4)(SP), DI
MOVL DI, (g_sched+gobuf_sp)(SI)
// Switch back to m->g0's stack and restore m->g0->sched.sp.
// (Unlike m->curg, the g0 goroutine never uses sched.pc,
// so we do not have to restore it.)
MOVL g(CX), BP
MOVL g_m(BP), BP
MOVL m_g0(BP), SI
MOVL SI, g(CX)
MOVL (g_sched+gobuf_sp)(SI), SP
MOVL 0(SP), AX
MOVL AX, (g_sched+gobuf_sp)(SI)
// If the m on entry was nil, we called needm above to borrow an m
// for the duration of the call. Since the call is over, return it with dropm.
CMPL DX, $0
JNE 3(PC)
MOVL $runtime·dropm(SB), AX
CALL AX
// Done!
RET
// void setg(G*); set g. for use by needm.
TEXT runtime·setg(SB), NOSPLIT, $0-4
MOVL gg+0(FP), BX
#ifdef GOOS_windows
CMPL BX, $0
JNE settls
MOVL $0, 0x14(FS)
RET
settls:
MOVL g_m(BX), AX
LEAL m_tls(AX), AX
MOVL AX, 0x14(FS)
#endif
get_tls(CX)
MOVL BX, g(CX)
RET
// void setg_gcc(G*); set g. for use by gcc
TEXT setg_gcc<>(SB), NOSPLIT, $0
get_tls(AX)
MOVL gg+0(FP), DX
MOVL DX, g(AX)
RET
// check that SP is in range [g->stack.lo, g->stack.hi)
TEXT runtime·stackcheck(SB), NOSPLIT, $0-0
get_tls(CX)
MOVL g(CX), AX
CMPL (g_stack+stack_hi)(AX), SP
JHI 2(PC)
INT $3
CMPL SP, (g_stack+stack_lo)(AX)
JHI 2(PC)
INT $3
RET
TEXT runtime·getcallerpc(SB),NOSPLIT,$4-8
MOVL argp+0(FP),AX // addr of first arg
MOVL -4(AX),AX // get calling pc
CMPL AX, runtime·stackBarrierPC(SB)
JNE nobar
// Get original return PC.
CALL runtime·nextBarrierPC(SB)
MOVL 0(SP), AX
nobar:
MOVL AX, ret+4(FP)
RET
TEXT runtime·setcallerpc(SB),NOSPLIT,$4-8
MOVL argp+0(FP),AX // addr of first arg
MOVL pc+4(FP), BX
MOVL -4(AX), DX
CMPL DX, runtime·stackBarrierPC(SB)
JEQ setbar
MOVL BX, -4(AX) // set calling pc
RET
setbar:
// Set the stack barrier return PC.
MOVL BX, 0(SP)
CALL runtime·setNextBarrierPC(SB)
RET
// func cputicks() int64
TEXT runtime·cputicks(SB),NOSPLIT,$0-8
TESTL $0x4000000, runtime·cpuid_edx(SB) // no sse2, no mfence
JEQ done
CMPB runtime·lfenceBeforeRdtsc(SB), $1
JNE mfence
BYTE $0x0f; BYTE $0xae; BYTE $0xe8 // LFENCE
JMP done
mfence:
BYTE $0x0f; BYTE $0xae; BYTE $0xf0 // MFENCE
done:
RDTSC
MOVL AX, ret_lo+0(FP)
MOVL DX, ret_hi+4(FP)
RET
TEXT runtime·ldt0setup(SB),NOSPLIT,$16-0
// set up ldt 7 to point at m0.tls
// ldt 1 would be fine on Linux, but on OS X, 7 is as low as we can go.
// the entry number is just a hint. setldt will set up GS with what it used.
MOVL $7, 0(SP)
LEAL runtime·m0+m_tls(SB), AX
MOVL AX, 4(SP)
MOVL $32, 8(SP) // sizeof(tls array)
CALL runtime·setldt(SB)
RET
TEXT runtime·emptyfunc(SB),0,$0-0
RET
// memhash_varlen(p unsafe.Pointer, h seed) uintptr
// redirects to memhash(p, h, size) using the size
// stored in the closure.
TEXT runtime·memhash_varlen(SB),NOSPLIT,$16-12
GO_ARGS
NO_LOCAL_POINTERS
MOVL p+0(FP), AX
MOVL h+4(FP), BX
MOVL 4(DX), CX
MOVL AX, 0(SP)
MOVL BX, 4(SP)
MOVL CX, 8(SP)
CALL runtime·memhash(SB)
MOVL 12(SP), AX
MOVL AX, ret+8(FP)
RET
// hash function using AES hardware instructions
TEXT runtime·aeshash(SB),NOSPLIT,$0-16
MOVL p+0(FP), AX // ptr to data
MOVL s+8(FP), BX // size
LEAL ret+12(FP), DX
JMP runtime·aeshashbody(SB)
TEXT runtime·aeshashstr(SB),NOSPLIT,$0-12
MOVL p+0(FP), AX // ptr to string object
MOVL 4(AX), BX // length of string
MOVL (AX), AX // string data
LEAL ret+8(FP), DX
JMP runtime·aeshashbody(SB)
// AX: data
// BX: length
// DX: address to put return value
TEXT runtime·aeshashbody(SB),NOSPLIT,$0-0
MOVL h+4(FP), X0 // 32 bits of per-table hash seed
PINSRW $4, BX, X0 // 16 bits of length
PSHUFHW $0, X0, X0 // replace size with its low 2 bytes repeated 4 times
MOVO X0, X1 // save unscrambled seed
PXOR runtime·aeskeysched(SB), X0 // xor in per-process seed
AESENC X0, X0 // scramble seed
CMPL BX, $16
JB aes0to15
JE aes16
CMPL BX, $32
JBE aes17to32
CMPL BX, $64
JBE aes33to64
JMP aes65plus
aes0to15:
TESTL BX, BX
JE aes0
ADDL $16, AX
TESTW $0xff0, AX
JE endofpage
// 16 bytes loaded at this address won't cross
// a page boundary, so we can load it directly.
MOVOU -16(AX), X1
ADDL BX, BX
PAND masks<>(SB)(BX*8), X1
final1:
AESENC X0, X1 // scramble input, xor in seed
AESENC X1, X1 // scramble combo 2 times
AESENC X1, X1
MOVL X1, (DX)
RET
endofpage:
// address ends in 1111xxxx. Might be up against
// a page boundary, so load ending at last byte.
// Then shift bytes down using pshufb.
MOVOU -32(AX)(BX*1), X1
ADDL BX, BX
PSHUFB shifts<>(SB)(BX*8), X1
JMP final1
aes0:
// Return scrambled input seed
AESENC X0, X0
MOVL X0, (DX)
RET
aes16:
MOVOU (AX), X1
JMP final1
aes17to32:
// make second starting seed
PXOR runtime·aeskeysched+16(SB), X1
AESENC X1, X1
// load data to be hashed
MOVOU (AX), X2
MOVOU -16(AX)(BX*1), X3
// scramble 3 times
AESENC X0, X2
AESENC X1, X3
AESENC X2, X2
AESENC X3, X3
AESENC X2, X2
AESENC X3, X3
// combine results
PXOR X3, X2
MOVL X2, (DX)
RET
aes33to64:
// make 3 more starting seeds
MOVO X1, X2
MOVO X1, X3
PXOR runtime·aeskeysched+16(SB), X1
PXOR runtime·aeskeysched+32(SB), X2
PXOR runtime·aeskeysched+48(SB), X3
AESENC X1, X1
AESENC X2, X2
AESENC X3, X3
MOVOU (AX), X4
MOVOU 16(AX), X5
MOVOU -32(AX)(BX*1), X6
MOVOU -16(AX)(BX*1), X7
AESENC X0, X4
AESENC X1, X5
AESENC X2, X6
AESENC X3, X7
AESENC X4, X4
AESENC X5, X5
AESENC X6, X6
AESENC X7, X7
AESENC X4, X4
AESENC X5, X5
AESENC X6, X6
AESENC X7, X7
PXOR X6, X4
PXOR X7, X5
PXOR X5, X4
MOVL X4, (DX)
RET
aes65plus:
// make 3 more starting seeds
MOVO X1, X2
MOVO X1, X3
PXOR runtime·aeskeysched+16(SB), X1
PXOR runtime·aeskeysched+32(SB), X2
PXOR runtime·aeskeysched+48(SB), X3
AESENC X1, X1
AESENC X2, X2
AESENC X3, X3
// start with last (possibly overlapping) block
MOVOU -64(AX)(BX*1), X4
MOVOU -48(AX)(BX*1), X5
MOVOU -32(AX)(BX*1), X6
MOVOU -16(AX)(BX*1), X7
// scramble state once
AESENC X0, X4
AESENC X1, X5
AESENC X2, X6
AESENC X3, X7
// compute number of remaining 64-byte blocks
DECL BX
SHRL $6, BX
aesloop:
// scramble state, xor in a block
MOVOU (AX), X0
MOVOU 16(AX), X1
MOVOU 32(AX), X2
MOVOU 48(AX), X3
AESENC X0, X4
AESENC X1, X5
AESENC X2, X6
AESENC X3, X7
// scramble state
AESENC X4, X4
AESENC X5, X5
AESENC X6, X6
AESENC X7, X7
ADDL $64, AX
DECL BX
JNE aesloop
// 2 more scrambles to finish
AESENC X4, X4
AESENC X5, X5
AESENC X6, X6
AESENC X7, X7
AESENC X4, X4
AESENC X5, X5
AESENC X6, X6
AESENC X7, X7
PXOR X6, X4
PXOR X7, X5
PXOR X5, X4
MOVL X4, (DX)
RET
TEXT runtime·aeshash32(SB),NOSPLIT,$0-12
MOVL p+0(FP), AX // ptr to data
MOVL h+4(FP), X0 // seed
PINSRD $1, (AX), X0 // data
AESENC runtime·aeskeysched+0(SB), X0
AESENC runtime·aeskeysched+16(SB), X0
AESENC runtime·aeskeysched+32(SB), X0
MOVL X0, ret+8(FP)
RET
TEXT runtime·aeshash64(SB),NOSPLIT,$0-12
MOVL p+0(FP), AX // ptr to data
MOVQ (AX), X0 // data
PINSRD $2, h+4(FP), X0 // seed
AESENC runtime·aeskeysched+0(SB), X0
AESENC runtime·aeskeysched+16(SB), X0
AESENC runtime·aeskeysched+32(SB), X0
MOVL X0, ret+8(FP)
RET
// simple mask to get rid of data in the high part of the register.
DATA masks<>+0x00(SB)/4, $0x00000000
DATA masks<>+0x04(SB)/4, $0x00000000
DATA masks<>+0x08(SB)/4, $0x00000000
DATA masks<>+0x0c(SB)/4, $0x00000000
DATA masks<>+0x10(SB)/4, $0x000000ff
DATA masks<>+0x14(SB)/4, $0x00000000
DATA masks<>+0x18(SB)/4, $0x00000000
DATA masks<>+0x1c(SB)/4, $0x00000000
DATA masks<>+0x20(SB)/4, $0x0000ffff
DATA masks<>+0x24(SB)/4, $0x00000000
DATA masks<>+0x28(SB)/4, $0x00000000
DATA masks<>+0x2c(SB)/4, $0x00000000
DATA masks<>+0x30(SB)/4, $0x00ffffff
DATA masks<>+0x34(SB)/4, $0x00000000
DATA masks<>+0x38(SB)/4, $0x00000000
DATA masks<>+0x3c(SB)/4, $0x00000000
DATA masks<>+0x40(SB)/4, $0xffffffff
DATA masks<>+0x44(SB)/4, $0x00000000
DATA masks<>+0x48(SB)/4, $0x00000000
DATA masks<>+0x4c(SB)/4, $0x00000000
DATA masks<>+0x50(SB)/4, $0xffffffff
DATA masks<>+0x54(SB)/4, $0x000000ff
DATA masks<>+0x58(SB)/4, $0x00000000
DATA masks<>+0x5c(SB)/4, $0x00000000
DATA masks<>+0x60(SB)/4, $0xffffffff
DATA masks<>+0x64(SB)/4, $0x0000ffff
DATA masks<>+0x68(SB)/4, $0x00000000
DATA masks<>+0x6c(SB)/4, $0x00000000
DATA masks<>+0x70(SB)/4, $0xffffffff
DATA masks<>+0x74(SB)/4, $0x00ffffff
DATA masks<>+0x78(SB)/4, $0x00000000
DATA masks<>+0x7c(SB)/4, $0x00000000
DATA masks<>+0x80(SB)/4, $0xffffffff
DATA masks<>+0x84(SB)/4, $0xffffffff
DATA masks<>+0x88(SB)/4, $0x00000000
DATA masks<>+0x8c(SB)/4, $0x00000000
DATA masks<>+0x90(SB)/4, $0xffffffff
DATA masks<>+0x94(SB)/4, $0xffffffff
DATA masks<>+0x98(SB)/4, $0x000000ff
DATA masks<>+0x9c(SB)/4, $0x00000000
DATA masks<>+0xa0(SB)/4, $0xffffffff
DATA masks<>+0xa4(SB)/4, $0xffffffff
DATA masks<>+0xa8(SB)/4, $0x0000ffff
DATA masks<>+0xac(SB)/4, $0x00000000
DATA masks<>+0xb0(SB)/4, $0xffffffff
DATA masks<>+0xb4(SB)/4, $0xffffffff
DATA masks<>+0xb8(SB)/4, $0x00ffffff
DATA masks<>+0xbc(SB)/4, $0x00000000
DATA masks<>+0xc0(SB)/4, $0xffffffff
DATA masks<>+0xc4(SB)/4, $0xffffffff
DATA masks<>+0xc8(SB)/4, $0xffffffff
DATA masks<>+0xcc(SB)/4, $0x00000000
DATA masks<>+0xd0(SB)/4, $0xffffffff
DATA masks<>+0xd4(SB)/4, $0xffffffff
DATA masks<>+0xd8(SB)/4, $0xffffffff
DATA masks<>+0xdc(SB)/4, $0x000000ff
DATA masks<>+0xe0(SB)/4, $0xffffffff
DATA masks<>+0xe4(SB)/4, $0xffffffff
DATA masks<>+0xe8(SB)/4, $0xffffffff
DATA masks<>+0xec(SB)/4, $0x0000ffff
DATA masks<>+0xf0(SB)/4, $0xffffffff
DATA masks<>+0xf4(SB)/4, $0xffffffff
DATA masks<>+0xf8(SB)/4, $0xffffffff
DATA masks<>+0xfc(SB)/4, $0x00ffffff
GLOBL masks<>(SB),RODATA,$256
// these are arguments to pshufb. They move data down from
// the high bytes of the register to the low bytes of the register.
// index is how many bytes to move.
DATA shifts<>+0x00(SB)/4, $0x00000000
DATA shifts<>+0x04(SB)/4, $0x00000000
DATA shifts<>+0x08(SB)/4, $0x00000000
DATA shifts<>+0x0c(SB)/4, $0x00000000
DATA shifts<>+0x10(SB)/4, $0xffffff0f
DATA shifts<>+0x14(SB)/4, $0xffffffff
DATA shifts<>+0x18(SB)/4, $0xffffffff
DATA shifts<>+0x1c(SB)/4, $0xffffffff
DATA shifts<>+0x20(SB)/4, $0xffff0f0e
DATA shifts<>+0x24(SB)/4, $0xffffffff
DATA shifts<>+0x28(SB)/4, $0xffffffff
DATA shifts<>+0x2c(SB)/4, $0xffffffff
DATA shifts<>+0x30(SB)/4, $0xff0f0e0d
DATA shifts<>+0x34(SB)/4, $0xffffffff
DATA shifts<>+0x38(SB)/4, $0xffffffff
DATA shifts<>+0x3c(SB)/4, $0xffffffff
DATA shifts<>+0x40(SB)/4, $0x0f0e0d0c
DATA shifts<>+0x44(SB)/4, $0xffffffff
DATA shifts<>+0x48(SB)/4, $0xffffffff
DATA shifts<>+0x4c(SB)/4, $0xffffffff
DATA shifts<>+0x50(SB)/4, $0x0e0d0c0b
DATA shifts<>+0x54(SB)/4, $0xffffff0f
DATA shifts<>+0x58(SB)/4, $0xffffffff
DATA shifts<>+0x5c(SB)/4, $0xffffffff
DATA shifts<>+0x60(SB)/4, $0x0d0c0b0a
DATA shifts<>+0x64(SB)/4, $0xffff0f0e
DATA shifts<>+0x68(SB)/4, $0xffffffff
DATA shifts<>+0x6c(SB)/4, $0xffffffff
DATA shifts<>+0x70(SB)/4, $0x0c0b0a09
DATA shifts<>+0x74(SB)/4, $0xff0f0e0d
DATA shifts<>+0x78(SB)/4, $0xffffffff
DATA shifts<>+0x7c(SB)/4, $0xffffffff
DATA shifts<>+0x80(SB)/4, $0x0b0a0908
DATA shifts<>+0x84(SB)/4, $0x0f0e0d0c
DATA shifts<>+0x88(SB)/4, $0xffffffff
DATA shifts<>+0x8c(SB)/4, $0xffffffff
DATA shifts<>+0x90(SB)/4, $0x0a090807
DATA shifts<>+0x94(SB)/4, $0x0e0d0c0b
DATA shifts<>+0x98(SB)/4, $0xffffff0f
DATA shifts<>+0x9c(SB)/4, $0xffffffff
DATA shifts<>+0xa0(SB)/4, $0x09080706
DATA shifts<>+0xa4(SB)/4, $0x0d0c0b0a
DATA shifts<>+0xa8(SB)/4, $0xffff0f0e
DATA shifts<>+0xac(SB)/4, $0xffffffff
DATA shifts<>+0xb0(SB)/4, $0x08070605
DATA shifts<>+0xb4(SB)/4, $0x0c0b0a09
DATA shifts<>+0xb8(SB)/4, $0xff0f0e0d
DATA shifts<>+0xbc(SB)/4, $0xffffffff
DATA shifts<>+0xc0(SB)/4, $0x07060504
DATA shifts<>+0xc4(SB)/4, $0x0b0a0908
DATA shifts<>+0xc8(SB)/4, $0x0f0e0d0c
DATA shifts<>+0xcc(SB)/4, $0xffffffff
DATA shifts<>+0xd0(SB)/4, $0x06050403
DATA shifts<>+0xd4(SB)/4, $0x0a090807
DATA shifts<>+0xd8(SB)/4, $0x0e0d0c0b
DATA shifts<>+0xdc(SB)/4, $0xffffff0f
DATA shifts<>+0xe0(SB)/4, $0x05040302
DATA shifts<>+0xe4(SB)/4, $0x09080706
DATA shifts<>+0xe8(SB)/4, $0x0d0c0b0a
DATA shifts<>+0xec(SB)/4, $0xffff0f0e
DATA shifts<>+0xf0(SB)/4, $0x04030201
DATA shifts<>+0xf4(SB)/4, $0x08070605
DATA shifts<>+0xf8(SB)/4, $0x0c0b0a09
DATA shifts<>+0xfc(SB)/4, $0xff0f0e0d
GLOBL shifts<>(SB),RODATA,$256
TEXT ·checkASM(SB),NOSPLIT,$0-1
// check that masks<>(SB) and shifts<>(SB) are aligned to 16-byte
MOVL $masks<>(SB), AX
MOVL $shifts<>(SB), BX
ORL BX, AX
TESTL $15, AX
SETEQ ret+0(FP)
RET
// memequal(p, q unsafe.Pointer, size uintptr) bool
TEXT runtime·memequal(SB),NOSPLIT,$0-13
MOVL a+0(FP), SI
MOVL b+4(FP), DI
CMPL SI, DI
JEQ eq
MOVL size+8(FP), BX
LEAL ret+12(FP), AX
JMP runtime·memeqbody(SB)
eq:
MOVB $1, ret+12(FP)
RET
// memequal_varlen(a, b unsafe.Pointer) bool
TEXT runtime·memequal_varlen(SB),NOSPLIT,$0-9
MOVL a+0(FP), SI
MOVL b+4(FP), DI
CMPL SI, DI
JEQ eq
MOVL 4(DX), BX // compiler stores size at offset 4 in the closure
LEAL ret+8(FP), AX
JMP runtime·memeqbody(SB)
eq:
MOVB $1, ret+8(FP)
RET
// eqstring tests whether two strings are equal.
// The compiler guarantees that strings passed
// to eqstring have equal length.
// See runtime_test.go:eqstring_generic for
// equivalent Go code.
TEXT runtime·eqstring(SB),NOSPLIT,$0-17
MOVL s1_base+0(FP), SI
MOVL s2_base+8(FP), DI
CMPL SI, DI
JEQ same
MOVL s1_len+4(FP), BX
LEAL ret+16(FP), AX
JMP runtime·memeqbody(SB)
same:
MOVB $1, ret+16(FP)
RET
TEXT bytes·Equal(SB),NOSPLIT,$0-25
MOVL a_len+4(FP), BX
MOVL b_len+16(FP), CX
CMPL BX, CX
JNE eqret
MOVL a+0(FP), SI
MOVL b+12(FP), DI
LEAL ret+24(FP), AX
JMP runtime·memeqbody(SB)
eqret:
MOVB $0, ret+24(FP)
RET
// a in SI
// b in DI
// count in BX
// address of result byte in AX
TEXT runtime·memeqbody(SB),NOSPLIT,$0-0
CMPL BX, $4
JB small
// 64 bytes at a time using xmm registers
hugeloop:
CMPL BX, $64
JB bigloop
TESTL $0x4000000, runtime·cpuid_edx(SB) // check for sse2
JE bigloop
MOVOU (SI), X0
MOVOU (DI), X1
MOVOU 16(SI), X2
MOVOU 16(DI), X3
MOVOU 32(SI), X4
MOVOU 32(DI), X5
MOVOU 48(SI), X6
MOVOU 48(DI), X7
PCMPEQB X1, X0
PCMPEQB X3, X2
PCMPEQB X5, X4
PCMPEQB X7, X6
PAND X2, X0
PAND X6, X4
PAND X4, X0
PMOVMSKB X0, DX
ADDL $64, SI
ADDL $64, DI
SUBL $64, BX
CMPL DX, $0xffff
JEQ hugeloop
MOVB $0, (AX)
RET
// 4 bytes at a time using 32-bit register
bigloop:
CMPL BX, $4
JBE leftover
MOVL (SI), CX
MOVL (DI), DX
ADDL $4, SI
ADDL $4, DI
SUBL $4, BX
CMPL CX, DX
JEQ bigloop
MOVB $0, (AX)
RET
// remaining 0-4 bytes
leftover:
MOVL -4(SI)(BX*1), CX
MOVL -4(DI)(BX*1), DX
CMPL CX, DX
SETEQ (AX)
RET
small:
CMPL BX, $0
JEQ equal
LEAL 0(BX*8), CX
NEGL CX
MOVL SI, DX
CMPB DX, $0xfc
JA si_high
// load at SI won't cross a page boundary.
MOVL (SI), SI
JMP si_finish
si_high:
// address ends in 111111xx. Load up to bytes we want, move to correct position.
MOVL -4(SI)(BX*1), SI
SHRL CX, SI
si_finish:
// same for DI.
MOVL DI, DX
CMPB DX, $0xfc
JA di_high
MOVL (DI), DI
JMP di_finish
di_high:
MOVL -4(DI)(BX*1), DI
SHRL CX, DI
di_finish:
SUBL SI, DI
SHLL CX, DI
equal:
SETEQ (AX)
RET
TEXT runtime·cmpstring(SB),NOSPLIT,$0-20
MOVL s1_base+0(FP), SI
MOVL s1_len+4(FP), BX
MOVL s2_base+8(FP), DI
MOVL s2_len+12(FP), DX
LEAL ret+16(FP), AX
JMP runtime·cmpbody(SB)
TEXT bytes·Compare(SB),NOSPLIT,$0-28
MOVL s1+0(FP), SI
MOVL s1+4(FP), BX
MOVL s2+12(FP), DI
MOVL s2+16(FP), DX
LEAL ret+24(FP), AX
JMP runtime·cmpbody(SB)
TEXT bytes·IndexByte(SB),NOSPLIT,$0-20
MOVL s+0(FP), SI
MOVL s_len+4(FP), CX
MOVB c+12(FP), AL
MOVL SI, DI
CLD; REPN; SCASB
JZ 3(PC)
MOVL $-1, ret+16(FP)
RET
SUBL SI, DI
SUBL $1, DI
MOVL DI, ret+16(FP)
RET
TEXT strings·IndexByte(SB),NOSPLIT,$0-16
MOVL s+0(FP), SI
MOVL s_len+4(FP), CX
MOVB c+8(FP), AL
MOVL SI, DI
CLD; REPN; SCASB
JZ 3(PC)
MOVL $-1, ret+12(FP)
RET
SUBL SI, DI
SUBL $1, DI
MOVL DI, ret+12(FP)
RET
// input:
// SI = a
// DI = b
// BX = alen
// DX = blen
// AX = address of return word (set to 1/0/-1)
TEXT runtime·cmpbody(SB),NOSPLIT,$0-0
MOVL DX, BP
SUBL BX, DX // DX = blen-alen
JLE 2(PC)
MOVL BX, BP // BP = min(alen, blen)
CMPL SI, DI
JEQ allsame
CMPL BP, $4
JB small
TESTL $0x4000000, runtime·cpuid_edx(SB) // check for sse2
JE mediumloop
largeloop:
CMPL BP, $16
JB mediumloop
MOVOU (SI), X0
MOVOU (DI), X1
PCMPEQB X0, X1
PMOVMSKB X1, BX
XORL $0xffff, BX // convert EQ to NE
JNE diff16 // branch if at least one byte is not equal
ADDL $16, SI
ADDL $16, DI
SUBL $16, BP
JMP largeloop
diff16:
BSFL BX, BX // index of first byte that differs
XORL DX, DX
MOVB (SI)(BX*1), CX
CMPB CX, (DI)(BX*1)
SETHI DX
LEAL -1(DX*2), DX // convert 1/0 to +1/-1
MOVL DX, (AX)
RET
mediumloop:
CMPL BP, $4
JBE _0through4
MOVL (SI), BX
MOVL (DI), CX
CMPL BX, CX
JNE diff4
ADDL $4, SI
ADDL $4, DI
SUBL $4, BP
JMP mediumloop
_0through4:
MOVL -4(SI)(BP*1), BX
MOVL -4(DI)(BP*1), CX
CMPL BX, CX
JEQ allsame
diff4:
BSWAPL BX // reverse order of bytes
BSWAPL CX
XORL BX, CX // find bit differences
BSRL CX, CX // index of highest bit difference
SHRL CX, BX // move a's bit to bottom
ANDL $1, BX // mask bit
LEAL -1(BX*2), BX // 1/0 => +1/-1
MOVL BX, (AX)
RET
// 0-3 bytes in common
small:
LEAL (BP*8), CX
NEGL CX
JEQ allsame
// load si
CMPB SI, $0xfc
JA si_high
MOVL (SI), SI
JMP si_finish
si_high:
MOVL -4(SI)(BP*1), SI
SHRL CX, SI
si_finish:
SHLL CX, SI
// same for di
CMPB DI, $0xfc
JA di_high
MOVL (DI), DI
JMP di_finish
di_high:
MOVL -4(DI)(BP*1), DI
SHRL CX, DI
di_finish:
SHLL CX, DI
BSWAPL SI // reverse order of bytes
BSWAPL DI
XORL SI, DI // find bit differences
JEQ allsame
BSRL DI, CX // index of highest bit difference
SHRL CX, SI // move a's bit to bottom
ANDL $1, SI // mask bit
LEAL -1(SI*2), BX // 1/0 => +1/-1
MOVL BX, (AX)
RET
// all the bytes in common are the same, so we just need
// to compare the lengths.
allsame:
XORL BX, BX
XORL CX, CX
TESTL DX, DX
SETLT BX // 1 if alen > blen
SETEQ CX // 1 if alen == blen
LEAL -1(CX)(BX*2), BX // 1,0,-1 result
MOVL BX, (AX)
RET
TEXT runtime·fastrand(SB), NOSPLIT, $0-4
get_tls(CX)
MOVL g(CX), AX
MOVL g_m(AX), AX
MOVL m_fastrand(AX), DX
ADDL DX, DX
MOVL DX, BX
XORL $0x88888eef, DX
JPL 2(PC)
MOVL BX, DX
MOVL DX, m_fastrand(AX)
MOVL DX, ret+0(FP)
RET
TEXT runtime·return0(SB), NOSPLIT, $0
MOVL $0, AX
RET
// Called from cgo wrappers, this function returns g->m->curg.stack.hi.
// Must obey the gcc calling convention.
TEXT _cgo_topofstack(SB),NOSPLIT,$0
get_tls(CX)
MOVL g(CX), AX
MOVL g_m(AX), AX
MOVL m_curg(AX), AX
MOVL (g_stack+stack_hi)(AX), AX
RET
// The top-most function running on a goroutine
// returns to goexit+PCQuantum.
TEXT runtime·goexit(SB),NOSPLIT,$0-0
BYTE $0x90 // NOP
CALL runtime·goexit1(SB) // does not return
// traceback from goexit1 must hit code range of goexit
BYTE $0x90 // NOP
// Prefetching doesn't seem to help.
TEXT runtime·prefetcht0(SB),NOSPLIT,$0-4
RET
TEXT runtime·prefetcht1(SB),NOSPLIT,$0-4
RET
TEXT runtime·prefetcht2(SB),NOSPLIT,$0-4
RET
TEXT runtime·prefetchnta(SB),NOSPLIT,$0-4
RET
// Add a module's moduledata to the linked list of moduledata objects. This
// is called from .init_array by a function generated in the linker and so
// follows the platform ABI wrt register preservation -- it only touches AX,
// CX (implicitly) and DX, but it does not follow the ABI wrt arguments:
// instead the pointer to the moduledata is passed in AX.
TEXT runtime·addmoduledata(SB),NOSPLIT,$0-0
MOVL runtime·lastmoduledatap(SB), DX
MOVL AX, moduledata_next(DX)
MOVL AX, runtime·lastmoduledatap(SB)
RET
TEXT runtime·uint32tofloat64(SB),NOSPLIT,$8-12
MOVL a+0(FP), AX
MOVL AX, 0(SP)
MOVL $0, 4(SP)
FMOVV 0(SP), F0
FMOVDP F0, ret+4(FP)
RET
TEXT runtime·float64touint32(SB),NOSPLIT,$12-12
FMOVD a+0(FP), F0
FSTCW 0(SP)
FLDCW runtime·controlWord64trunc(SB)
FMOVVP F0, 4(SP)
FLDCW 0(SP)
MOVL 4(SP), AX
MOVL AX, ret+8(FP)
RET