blob: 49c7579f275d3fb8c608bb7bdfc0658792e9582a [file] [log] [blame]
// Copyright 2012 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
// +build darwin dragonfly freebsd linux netbsd openbsd solaris
package runtime
import (
"runtime/internal/sys"
"unsafe"
)
//go:linkname os_sigpipe os.sigpipe
func os_sigpipe() {
systemstack(sigpipe)
}
func signame(sig uint32) string {
if sig >= uint32(len(sigtable)) {
return ""
}
return sigtable[sig].name
}
const (
_SIG_DFL uintptr = 0
_SIG_IGN uintptr = 1
)
// Stores the signal handlers registered before Go installed its own.
// These signal handlers will be invoked in cases where Go doesn't want to
// handle a particular signal (e.g., signal occurred on a non-Go thread).
// See sigfwdgo() for more information on when the signals are forwarded.
//
// Signal forwarding is currently available only on Darwin and Linux.
var fwdSig [_NSIG]uintptr
// channels for synchronizing signal mask updates with the signal mask
// thread
var (
disableSigChan chan uint32
enableSigChan chan uint32
maskUpdatedChan chan struct{}
)
func init() {
// _NSIG is the number of signals on this operating system.
// sigtable should describe what to do for all the possible signals.
if len(sigtable) != _NSIG {
print("runtime: len(sigtable)=", len(sigtable), " _NSIG=", _NSIG, "\n")
throw("bad sigtable len")
}
}
var signalsOK bool
// Initialize signals.
// Called by libpreinit so runtime may not be initialized.
//go:nosplit
//go:nowritebarrierrec
func initsig(preinit bool) {
if !preinit {
// It's now OK for signal handlers to run.
signalsOK = true
}
// For c-archive/c-shared this is called by libpreinit with
// preinit == true.
if (isarchive || islibrary) && !preinit {
return
}
for i := uint32(0); i < _NSIG; i++ {
t := &sigtable[i]
if t.flags == 0 || t.flags&_SigDefault != 0 {
continue
}
fwdSig[i] = getsig(i)
if !sigInstallGoHandler(i) {
// Even if we are not installing a signal handler,
// set SA_ONSTACK if necessary.
if fwdSig[i] != _SIG_DFL && fwdSig[i] != _SIG_IGN {
setsigstack(i)
}
continue
}
t.flags |= _SigHandling
setsig(i, funcPC(sighandler))
}
}
//go:nosplit
//go:nowritebarrierrec
func sigInstallGoHandler(sig uint32) bool {
// For some signals, we respect an inherited SIG_IGN handler
// rather than insist on installing our own default handler.
// Even these signals can be fetched using the os/signal package.
switch sig {
case _SIGHUP, _SIGINT:
if fwdSig[sig] == _SIG_IGN {
return false
}
}
t := &sigtable[sig]
if t.flags&_SigSetStack != 0 {
return false
}
// When built using c-archive or c-shared, only install signal
// handlers for synchronous signals.
if (isarchive || islibrary) && t.flags&_SigPanic == 0 {
return false
}
return true
}
func sigenable(sig uint32) {
if sig >= uint32(len(sigtable)) {
return
}
t := &sigtable[sig]
if t.flags&_SigNotify != 0 {
ensureSigM()
enableSigChan <- sig
<-maskUpdatedChan
if t.flags&_SigHandling == 0 {
t.flags |= _SigHandling
fwdSig[sig] = getsig(sig)
setsig(sig, funcPC(sighandler))
}
}
}
func sigdisable(sig uint32) {
if sig >= uint32(len(sigtable)) {
return
}
t := &sigtable[sig]
if t.flags&_SigNotify != 0 {
ensureSigM()
disableSigChan <- sig
<-maskUpdatedChan
// If initsig does not install a signal handler for a
// signal, then to go back to the state before Notify
// we should remove the one we installed.
if !sigInstallGoHandler(sig) {
t.flags &^= _SigHandling
setsig(sig, fwdSig[sig])
}
}
}
func sigignore(sig uint32) {
if sig >= uint32(len(sigtable)) {
return
}
t := &sigtable[sig]
if t.flags&_SigNotify != 0 {
t.flags &^= _SigHandling
setsig(sig, _SIG_IGN)
}
}
func resetcpuprofiler(hz int32) {
var it itimerval
if hz == 0 {
setitimer(_ITIMER_PROF, &it, nil)
} else {
it.it_interval.tv_sec = 0
it.it_interval.set_usec(1000000 / hz)
it.it_value = it.it_interval
setitimer(_ITIMER_PROF, &it, nil)
}
_g_ := getg()
_g_.m.profilehz = hz
}
func sigpipe() {
if sigsend(_SIGPIPE) {
return
}
dieFromSignal(_SIGPIPE)
}
// sigtrampgo is called from the signal handler function, sigtramp,
// written in assembly code.
// This is called by the signal handler, and the world may be stopped.
//go:nosplit
//go:nowritebarrierrec
func sigtrampgo(sig uint32, info *siginfo, ctx unsafe.Pointer) {
if sigfwdgo(sig, info, ctx) {
return
}
g := getg()
if g == nil {
c := &sigctxt{info, ctx}
if sig == _SIGPROF {
sigprofNonGoPC(c.sigpc())
return
}
badsignal(uintptr(sig), c)
return
}
// If some non-Go code called sigaltstack, adjust.
setStack := false
var gsignalStack gsignalStack
sp := uintptr(unsafe.Pointer(&sig))
if sp < g.m.gsignal.stack.lo || sp >= g.m.gsignal.stack.hi {
if sp >= g.m.g0.stack.lo && sp < g.m.g0.stack.hi {
// The signal was delivered on the g0 stack.
// This can happen when linked with C code
// using the thread sanitizer, which collects
// signals then delivers them itself by calling
// the signal handler directly when C code,
// including C code called via cgo, calls a
// TSAN-intercepted function such as malloc.
st := stackt{ss_size: g.m.g0.stack.hi - g.m.g0.stack.lo}
setSignalstackSP(&st, g.m.g0.stack.lo)
setGsignalStack(&st, &gsignalStack)
g.m.gsignal.stktopsp = getcallersp(unsafe.Pointer(&sig))
setStack = true
} else {
var st stackt
sigaltstack(nil, &st)
if st.ss_flags&_SS_DISABLE != 0 {
setg(nil)
needm(0)
noSignalStack(sig)
dropm()
}
stsp := uintptr(unsafe.Pointer(st.ss_sp))
if sp < stsp || sp >= stsp+st.ss_size {
setg(nil)
needm(0)
sigNotOnStack(sig)
dropm()
}
setGsignalStack(&st, &gsignalStack)
g.m.gsignal.stktopsp = getcallersp(unsafe.Pointer(&sig))
setStack = true
}
}
setg(g.m.gsignal)
c := &sigctxt{info, ctx}
c.fixsigcode(sig)
sighandler(sig, info, ctx, g)
setg(g)
if setStack {
restoreGsignalStack(&gsignalStack)
}
}
// sigpanic turns a synchronous signal into a run-time panic.
// If the signal handler sees a synchronous panic, it arranges the
// stack to look like the function where the signal occurred called
// sigpanic, sets the signal's PC value to sigpanic, and returns from
// the signal handler. The effect is that the program will act as
// though the function that got the signal simply called sigpanic
// instead.
func sigpanic() {
g := getg()
if !canpanic(g) {
throw("unexpected signal during runtime execution")
}
switch g.sig {
case _SIGBUS:
if g.sigcode0 == _BUS_ADRERR && g.sigcode1 < 0x1000 {
panicmem()
}
// Support runtime/debug.SetPanicOnFault.
if g.paniconfault {
panicmem()
}
print("unexpected fault address ", hex(g.sigcode1), "\n")
throw("fault")
case _SIGSEGV:
if (g.sigcode0 == 0 || g.sigcode0 == _SEGV_MAPERR || g.sigcode0 == _SEGV_ACCERR) && g.sigcode1 < 0x1000 {
panicmem()
}
// Support runtime/debug.SetPanicOnFault.
if g.paniconfault {
panicmem()
}
print("unexpected fault address ", hex(g.sigcode1), "\n")
throw("fault")
case _SIGFPE:
switch g.sigcode0 {
case _FPE_INTDIV:
panicdivide()
case _FPE_INTOVF:
panicoverflow()
}
panicfloat()
}
if g.sig >= uint32(len(sigtable)) {
// can't happen: we looked up g.sig in sigtable to decide to call sigpanic
throw("unexpected signal value")
}
panic(errorString(sigtable[g.sig].name))
}
// dieFromSignal kills the program with a signal.
// This provides the expected exit status for the shell.
// This is only called with fatal signals expected to kill the process.
//go:nosplit
//go:nowritebarrierrec
func dieFromSignal(sig uint32) {
setsig(sig, _SIG_DFL)
unblocksig(sig)
raise(sig)
// That should have killed us. On some systems, though, raise
// sends the signal to the whole process rather than to just
// the current thread, which means that the signal may not yet
// have been delivered. Give other threads a chance to run and
// pick up the signal.
osyield()
osyield()
osyield()
// If we are still somehow running, just exit with the wrong status.
exit(2)
}
// raisebadsignal is called when a signal is received on a non-Go
// thread, and the Go program does not want to handle it (that is, the
// program has not called os/signal.Notify for the signal).
func raisebadsignal(sig uint32, c *sigctxt) {
if sig == _SIGPROF {
// Ignore profiling signals that arrive on non-Go threads.
return
}
var handler uintptr
if sig >= _NSIG {
handler = _SIG_DFL
} else {
handler = fwdSig[sig]
}
// Reset the signal handler and raise the signal.
// We are currently running inside a signal handler, so the
// signal is blocked. We need to unblock it before raising the
// signal, or the signal we raise will be ignored until we return
// from the signal handler. We know that the signal was unblocked
// before entering the handler, or else we would not have received
// it. That means that we don't have to worry about blocking it
// again.
unblocksig(sig)
setsig(sig, handler)
// If we're linked into a non-Go program we want to try to
// avoid modifying the original context in which the signal
// was raised. If the handler is the default, we know it
// is non-recoverable, so we don't have to worry about
// re-installing sighandler. At this point we can just
// return and the signal will be re-raised and caught by
// the default handler with the correct context.
if (isarchive || islibrary) && handler == _SIG_DFL && c.sigcode() != _SI_USER {
return
}
raise(sig)
// Give the signal a chance to be delivered.
// In almost all real cases the program is about to crash,
// so sleeping here is not a waste of time.
usleep(1000)
// If the signal didn't cause the program to exit, restore the
// Go signal handler and carry on.
//
// We may receive another instance of the signal before we
// restore the Go handler, but that is not so bad: we know
// that the Go program has been ignoring the signal.
setsig(sig, funcPC(sighandler))
}
func crash() {
if GOOS == "darwin" {
// OS X core dumps are linear dumps of the mapped memory,
// from the first virtual byte to the last, with zeros in the gaps.
// Because of the way we arrange the address space on 64-bit systems,
// this means the OS X core file will be >128 GB and even on a zippy
// workstation can take OS X well over an hour to write (uninterruptible).
// Save users from making that mistake.
if sys.PtrSize == 8 {
return
}
}
dieFromSignal(_SIGABRT)
}
// ensureSigM starts one global, sleeping thread to make sure at least one thread
// is available to catch signals enabled for os/signal.
func ensureSigM() {
if maskUpdatedChan != nil {
return
}
maskUpdatedChan = make(chan struct{})
disableSigChan = make(chan uint32)
enableSigChan = make(chan uint32)
go func() {
// Signal masks are per-thread, so make sure this goroutine stays on one
// thread.
LockOSThread()
defer UnlockOSThread()
// The sigBlocked mask contains the signals not active for os/signal,
// initially all signals except the essential. When signal.Notify()/Stop is called,
// sigenable/sigdisable in turn notify this thread to update its signal
// mask accordingly.
sigBlocked := sigset_all
for i := range sigtable {
if sigtable[i].flags&_SigUnblock != 0 {
sigdelset(&sigBlocked, i)
}
}
sigprocmask(_SIG_SETMASK, &sigBlocked, nil)
for {
select {
case sig := <-enableSigChan:
if sig > 0 {
sigdelset(&sigBlocked, int(sig))
}
case sig := <-disableSigChan:
if sig > 0 {
sigaddset(&sigBlocked, int(sig))
}
}
sigprocmask(_SIG_SETMASK, &sigBlocked, nil)
maskUpdatedChan <- struct{}{}
}
}()
}
// This is called when we receive a signal when there is no signal stack.
// This can only happen if non-Go code calls sigaltstack to disable the
// signal stack.
func noSignalStack(sig uint32) {
println("signal", sig, "received on thread with no signal stack")
throw("non-Go code disabled sigaltstack")
}
// This is called if we receive a signal when there is a signal stack
// but we are not on it. This can only happen if non-Go code called
// sigaction without setting the SS_ONSTACK flag.
func sigNotOnStack(sig uint32) {
println("signal", sig, "received but handler not on signal stack")
throw("non-Go code set up signal handler without SA_ONSTACK flag")
}
// This runs on a foreign stack, without an m or a g. No stack split.
//go:nosplit
//go:norace
//go:nowritebarrierrec
func badsignal(sig uintptr, c *sigctxt) {
needm(0)
if !sigsend(uint32(sig)) {
// A foreign thread received the signal sig, and the
// Go code does not want to handle it.
raisebadsignal(uint32(sig), c)
}
dropm()
}
//go:noescape
func sigfwd(fn uintptr, sig uint32, info *siginfo, ctx unsafe.Pointer)
// Determines if the signal should be handled by Go and if not, forwards the
// signal to the handler that was installed before Go's. Returns whether the
// signal was forwarded.
// This is called by the signal handler, and the world may be stopped.
//go:nosplit
//go:nowritebarrierrec
func sigfwdgo(sig uint32, info *siginfo, ctx unsafe.Pointer) bool {
if sig >= uint32(len(sigtable)) {
return false
}
fwdFn := fwdSig[sig]
if !signalsOK {
// The only way we can get here is if we are in a
// library or archive, we installed a signal handler
// at program startup, but the Go runtime has not yet
// been initialized.
if fwdFn == _SIG_DFL {
dieFromSignal(sig)
} else {
sigfwd(fwdFn, sig, info, ctx)
}
return true
}
flags := sigtable[sig].flags
// If there is no handler to forward to, no need to forward.
if fwdFn == _SIG_DFL {
return false
}
// If we aren't handling the signal, forward it.
if flags&_SigHandling == 0 {
sigfwd(fwdFn, sig, info, ctx)
return true
}
// Only forward synchronous signals.
c := &sigctxt{info, ctx}
if c.sigcode() == _SI_USER || flags&_SigPanic == 0 {
return false
}
// Determine if the signal occurred inside Go code. We test that:
// (1) we were in a goroutine (i.e., m.curg != nil), and
// (2) we weren't in CGO (i.e., m.curg.syscallsp == 0).
g := getg()
if g != nil && g.m != nil && g.m.curg != nil && g.m.curg.syscallsp == 0 {
return false
}
// Signal not handled by Go, forward it.
if fwdFn != _SIG_IGN {
sigfwd(fwdFn, sig, info, ctx)
}
return true
}
// msigsave saves the current thread's signal mask into mp.sigmask.
// This is used to preserve the non-Go signal mask when a non-Go
// thread calls a Go function.
// This is nosplit and nowritebarrierrec because it is called by needm
// which may be called on a non-Go thread with no g available.
//go:nosplit
//go:nowritebarrierrec
func msigsave(mp *m) {
sigprocmask(_SIG_SETMASK, nil, &mp.sigmask)
}
// msigrestore sets the current thread's signal mask to sigmask.
// This is used to restore the non-Go signal mask when a non-Go thread
// calls a Go function.
// This is nosplit and nowritebarrierrec because it is called by dropm
// after g has been cleared.
//go:nosplit
//go:nowritebarrierrec
func msigrestore(sigmask sigset) {
sigprocmask(_SIG_SETMASK, &sigmask, nil)
}
// sigblock blocks all signals in the current thread's signal mask.
// This is used to block signals while setting up and tearing down g
// when a non-Go thread calls a Go function.
// The OS-specific code is expected to define sigset_all.
// This is nosplit and nowritebarrierrec because it is called by needm
// which may be called on a non-Go thread with no g available.
//go:nosplit
//go:nowritebarrierrec
func sigblock() {
sigprocmask(_SIG_SETMASK, &sigset_all, nil)
}
// unblocksig removes sig from the current thread's signal mask.
// This is nosplit and nowritebarrierrec because it is called from
// dieFromSignal, which can be called by sigfwdgo while running in the
// signal handler, on the signal stack, with no g available.
//go:nosplit
//go:nowritebarrierrec
func unblocksig(sig uint32) {
var set sigset
sigaddset(&set, int(sig))
sigprocmask(_SIG_UNBLOCK, &set, nil)
}
// minitSignals is called when initializing a new m to set the
// thread's alternate signal stack and signal mask.
func minitSignals() {
minitSignalStack()
minitSignalMask()
}
// minitSignalStack is called when initializing a new m to set the
// alternate signal stack. If the alternate signal stack is not set
// for the thread (the normal case) then set the alternate signal
// stack to the gsignal stack. If the alternate signal stack is set
// for the thread (the case when a non-Go thread sets the alternate
// signal stack and then calls a Go function) then set the gsignal
// stack to the alternate signal stack. Record which choice was made
// in newSigstack, so that it can be undone in unminit.
func minitSignalStack() {
_g_ := getg()
var st stackt
sigaltstack(nil, &st)
if st.ss_flags&_SS_DISABLE != 0 {
signalstack(&_g_.m.gsignal.stack)
_g_.m.newSigstack = true
} else {
setGsignalStack(&st, nil)
_g_.m.newSigstack = false
}
}
// minitSignalMask is called when initializing a new m to set the
// thread's signal mask. When this is called all signals have been
// blocked for the thread. This starts with m.sigmask, which was set
// either from initSigmask for a newly created thread or by calling
// msigsave if this is a non-Go thread calling a Go function. It
// removes all essential signals from the mask, thus causing those
// signals to not be blocked. Then it sets the thread's signal mask.
// After this is called the thread can receive signals.
func minitSignalMask() {
nmask := getg().m.sigmask
for i := range sigtable {
if sigtable[i].flags&_SigUnblock != 0 {
sigdelset(&nmask, i)
}
}
sigprocmask(_SIG_SETMASK, &nmask, nil)
}
// unminitSignals is called from dropm, via unminit, to undo the
// effect of calling minit on a non-Go thread.
//go:nosplit
func unminitSignals() {
if getg().m.newSigstack {
st := stackt{ss_flags: _SS_DISABLE}
sigaltstack(&st, nil)
}
}
// gsignalStack saves the fields of the gsignal stack changed by
// setGsignalStack.
type gsignalStack struct {
stack stack
stackguard0 uintptr
stackguard1 uintptr
stackAlloc uintptr
stktopsp uintptr
}
// setGsignalStack sets the gsignal stack of the current m to an
// alternate signal stack returned from the sigaltstack system call.
// It saves the old values in *old for use by restoreGsignalStack.
// This is used when handling a signal if non-Go code has set the
// alternate signal stack.
//go:nosplit
//go:nowritebarrierrec
func setGsignalStack(st *stackt, old *gsignalStack) {
g := getg()
if old != nil {
old.stack = g.m.gsignal.stack
old.stackguard0 = g.m.gsignal.stackguard0
old.stackguard1 = g.m.gsignal.stackguard1
old.stackAlloc = g.m.gsignal.stackAlloc
old.stktopsp = g.m.gsignal.stktopsp
}
stsp := uintptr(unsafe.Pointer(st.ss_sp))
g.m.gsignal.stack.lo = stsp
g.m.gsignal.stack.hi = stsp + st.ss_size
g.m.gsignal.stackguard0 = stsp + _StackGuard
g.m.gsignal.stackguard1 = stsp + _StackGuard
g.m.gsignal.stackAlloc = st.ss_size
}
// restoreGsignalStack restores the gsignal stack to the value it had
// before entering the signal handler.
//go:nosplit
//go:nowritebarrierrec
func restoreGsignalStack(st *gsignalStack) {
gp := getg().m.gsignal
gp.stack = st.stack
gp.stackguard0 = st.stackguard0
gp.stackguard1 = st.stackguard1
gp.stackAlloc = st.stackAlloc
gp.stktopsp = st.stktopsp
}
// signalstack sets the current thread's alternate signal stack to s.
//go:nosplit
func signalstack(s *stack) {
st := stackt{ss_size: s.hi - s.lo}
setSignalstackSP(&st, s.lo)
sigaltstack(&st, nil)
}
// setsigsegv is used on darwin/arm{,64} to fake a segmentation fault.
//go:nosplit
func setsigsegv(pc uintptr) {
g := getg()
g.sig = _SIGSEGV
g.sigpc = pc
g.sigcode0 = _SEGV_MAPERR
g.sigcode1 = 0 // TODO: emulate si_addr
}