// Copyright 2009 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.

// Package gzip implements reading and writing of gzip format compressed files,
// as specified in RFC 1952.
package gzip

import (
	"bufio"
	"compress/flate"
	"errors"
	"hash/crc32"
	"io"
	"time"
)

const (
	gzipID1     = 0x1f
	gzipID2     = 0x8b
	gzipDeflate = 8
	flagText    = 1 << 0
	flagHdrCrc  = 1 << 1
	flagExtra   = 1 << 2
	flagName    = 1 << 3
	flagComment = 1 << 4
)

var (
	// ErrChecksum is returned when reading GZIP data that has an invalid checksum.
	ErrChecksum = errors.New("gzip: invalid checksum")
	// ErrHeader is returned when reading GZIP data that has an invalid header.
	ErrHeader = errors.New("gzip: invalid header")
)

// The gzip file stores a header giving metadata about the compressed file.
// That header is exposed as the fields of the Writer and Reader structs.
//
// Strings must be UTF-8 encoded and may only contain Unicode code points
// U+0001 through U+00FF, due to limitations of the GZIP file format.
type Header struct {
	Comment string    // comment
	Extra   []byte    // "extra data"
	ModTime time.Time // modification time
	Name    string    // file name
	OS      byte      // operating system type
}

// A Reader is an io.Reader that can be read to retrieve
// uncompressed data from a gzip-format compressed file.
//
// In general, a gzip file can be a concatenation of gzip files,
// each with its own header. Reads from the Reader
// return the concatenation of the uncompressed data of each.
// Only the first header is recorded in the Reader fields.
//
// Gzip files store a length and checksum of the uncompressed data.
// The Reader will return a ErrChecksum when Read
// reaches the end of the uncompressed data if it does not
// have the expected length or checksum. Clients should treat data
// returned by Read as tentative until they receive the io.EOF
// marking the end of the data.
type Reader struct {
	Header       // valid after NewReader or Reader.Reset
	r            flate.Reader
	decompressor io.ReadCloser
	digest       uint32 // CRC-32, IEEE polynomial (section 8)
	size         uint32 // Uncompressed size (section 2.3.1)
	buf          [512]byte
	err          error
	multistream  bool
}

// NewReader creates a new Reader reading the given reader.
// If r does not also implement io.ByteReader,
// the decompressor may read more data than necessary from r.
//
// It is the caller's responsibility to call Close on the Reader when done.
//
// The Reader.Header fields will be valid in the Reader returned.
func NewReader(r io.Reader) (*Reader, error) {
	z := new(Reader)
	if err := z.Reset(r); err != nil {
		return nil, err
	}
	return z, nil
}

// Reset discards the Reader z's state and makes it equivalent to the
// result of its original state from NewReader, but reading from r instead.
// This permits reusing a Reader rather than allocating a new one.
func (z *Reader) Reset(r io.Reader) error {
	*z = Reader{
		decompressor: z.decompressor,
		multistream:  true,
	}
	if rr, ok := r.(flate.Reader); ok {
		z.r = rr
	} else {
		z.r = bufio.NewReader(r)
	}
	return z.readHeader(true)
}

// Multistream controls whether the reader supports multistream files.
//
// If enabled (the default), the Reader expects the input to be a sequence
// of individually gzipped data streams, each with its own header and
// trailer, ending at EOF. The effect is that the concatenation of a sequence
// of gzipped files is treated as equivalent to the gzip of the concatenation
// of the sequence. This is standard behavior for gzip readers.
//
// Calling Multistream(false) disables this behavior; disabling the behavior
// can be useful when reading file formats that distinguish individual gzip
// data streams or mix gzip data streams with other data streams.
// In this mode, when the Reader reaches the end of the data stream,
// Read returns io.EOF. If the underlying reader implements io.ByteReader,
// it will be left positioned just after the gzip stream.
// To start the next stream, call z.Reset(r) followed by z.Multistream(false).
// If there is no next stream, z.Reset(r) will return io.EOF.
func (z *Reader) Multistream(ok bool) {
	z.multistream = ok
}

// GZIP (RFC 1952) is little-endian, unlike ZLIB (RFC 1950).
func get4(p []byte) uint32 {
	return uint32(p[0]) | uint32(p[1])<<8 | uint32(p[2])<<16 | uint32(p[3])<<24
}

func (z *Reader) readString() (string, error) {
	var err error
	needconv := false
	for i := 0; ; i++ {
		if i >= len(z.buf) {
			return "", ErrHeader
		}
		z.buf[i], err = z.r.ReadByte()
		if err != nil {
			return "", err
		}
		if z.buf[i] > 0x7f {
			needconv = true
		}
		if z.buf[i] == 0 {
			// GZIP (RFC 1952) specifies that strings are NUL-terminated ISO 8859-1 (Latin-1).
			if needconv {
				s := make([]rune, 0, i)
				for _, v := range z.buf[:i] {
					s = append(s, rune(v))
				}
				return string(s), nil
			}
			return string(z.buf[:i]), nil
		}
	}
}

func (z *Reader) read2() (uint32, error) {
	_, err := io.ReadFull(z.r, z.buf[:2])
	if err != nil {
		if err == io.EOF {
			err = io.ErrUnexpectedEOF
		}
		return 0, err
	}
	return uint32(z.buf[0]) | uint32(z.buf[1])<<8, nil
}

func (z *Reader) readHeader(save bool) error {
	_, err := io.ReadFull(z.r, z.buf[:10])
	if err != nil {
		// RFC 1952, section 2.2, says the following:
		//	A gzip file consists of a series of "members" (compressed data sets).
		//
		// Other than this, the specification does not clarify whether a
		// "series" is defined as "one or more" or "zero or more". To err on the
		// side of caution, Go interprets this to mean "zero or more".
		// Thus, it is okay to return io.EOF here.
		return err
	}
	if z.buf[0] != gzipID1 || z.buf[1] != gzipID2 || z.buf[2] != gzipDeflate {
		return ErrHeader
	}
	flg := z.buf[3]
	if save {
		z.ModTime = time.Unix(int64(get4(z.buf[4:8])), 0)
		// z.buf[8] is xfl, ignored
		z.OS = z.buf[9]
	}
	z.digest = crc32.Update(0, crc32.IEEETable, z.buf[:10])

	if flg&flagExtra != 0 {
		n, err := z.read2()
		if err != nil {
			return err
		}
		data := make([]byte, n)
		if _, err = io.ReadFull(z.r, data); err != nil {
			if err == io.EOF {
				err = io.ErrUnexpectedEOF
			}
			return err
		}
		if save {
			z.Extra = data
		}
	}

	var s string
	if flg&flagName != 0 {
		if s, err = z.readString(); err != nil {
			return err
		}
		if save {
			z.Name = s
		}
	}

	if flg&flagComment != 0 {
		if s, err = z.readString(); err != nil {
			return err
		}
		if save {
			z.Comment = s
		}
	}

	if flg&flagHdrCrc != 0 {
		n, err := z.read2()
		if err != nil {
			return err
		}
		sum := z.digest & 0xFFFF
		if n != sum {
			return ErrHeader
		}
	}

	z.digest = 0
	if z.decompressor == nil {
		z.decompressor = flate.NewReader(z.r)
	} else {
		z.decompressor.(flate.Resetter).Reset(z.r, nil)
	}
	return nil
}

func (z *Reader) Read(p []byte) (n int, err error) {
	if z.err != nil {
		return 0, z.err
	}

	n, z.err = z.decompressor.Read(p)
	z.digest = crc32.Update(z.digest, crc32.IEEETable, p[:n])
	z.size += uint32(n)
	if z.err != io.EOF {
		// In the normal case we return here.
		return n, z.err
	}

	// Finished file; check checksum and size.
	if _, err := io.ReadFull(z.r, z.buf[:8]); err != nil {
		if err == io.EOF {
			err = io.ErrUnexpectedEOF
		}
		z.err = err
		return n, err
	}
	digest, size := get4(z.buf[:4]), get4(z.buf[4:8])
	if digest != z.digest || size != z.size {
		z.err = ErrChecksum
		return n, z.err
	}
	z.digest, z.size = 0, 0

	// File is ok; check if there is another.
	if !z.multistream {
		return n, io.EOF
	}
	z.err = nil // Remove io.EOF

	if z.err = z.readHeader(false); z.err != nil {
		return n, z.err
	}

	// Read from next file, if necessary.
	if n > 0 {
		return n, nil
	}
	return z.Read(p)
}

// Close closes the Reader. It does not close the underlying io.Reader.
func (z *Reader) Close() error { return z.decompressor.Close() }