// $G $D/$F.go && $L $F.$A && ./$A.out

// Copyright 2009 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.

// Power series package
// A power series is a channel, along which flow rational
// coefficients.  A denominator of zero signifies the end.
// Original code in Newsqueak by Doug McIlroy.
// See Squinting at Power Series by Doug McIlroy,
//   http://www.cs.bell-labs.com/who/rsc/thread/squint.pdf

package main

type rat struct  {
	num, den  int64;	// numerator, denominator
}

func (u *rat) pr(){
	if u.den==1 { print u.num }
	else { print u.num, "/", u.den }
	print(" ")
}

func (u *rat) eq(c *rat) bool {
	return u.num == c.num && u.den == c.den
}

type item *rat;

type dch struct {
	req *chan  int;
	dat *chan  item;
	nam int;
}

type dch2 [2] *dch

var chnames string
var chnameserial int
var seqno int

func Init();

func mkdch() *dch {
	c := chnameserial % len(chnames);
	chnameserial++;
	d := new(dch);
	d.req = new(chan int);
	d.dat = new(chan item);
	d.nam = c;
	return d;
}

func mkdch2() *dch2 {
	d2 := new(dch2);
	d2[0] = mkdch();
	d2[1] = mkdch();
	return d2;
}

// split reads a single demand channel and replicates its
// output onto two, which may be read at different rates.
// A process is created at first demand for an item and dies
// after the item has been sent to both outputs.

// When multiple generations of split exist, the newest
// will service requests on one channel, which is
// always renamed to be out[0]; the oldest will service
// requests on the other channel, out[1].  All generations but the
// newest hold queued data that has already been sent to
// out[0].  When data has finally been sent to out[1],
// a signal on the release-wait channel tells the next newer
// generation to begin servicing out[1].

func dosplit(in *dch, out *dch2, wait *chan int ){
//print "dosplit ", wait, "\n";
	var t *dch;
	both := false;	// do not service both channels
/*
	select {
	case <-out[0].req:
		;
	case <-wait:
		both = 1;
		select {
		case <-out[0].req:
			;
		case <-out[1].req:
			t=out[0]; out[0]=out[1]; out[1]=t;
		};
	}
*/
// select simulation
	for {
		var ok bool;
		var dummy int;
		dummy, ok = <-out[0].req;
		if ok { goto OUT1 }
		dummy, ok = <-wait;
		if ok {
			both = true;
			// select simulation
			for {
				dummy, ok = <-out[0].req;
				if ok { goto OUT1 }
				dummy, ok = <-out[1].req;
				if ok {
					out[0], out[1] = out[1], out[0];
					goto OUT1
				}
				sys.gosched();
			}
		}
		sys.gosched();
	}

OUT1: //BUG

	seqno++;
	in.req -< seqno;
	release := new(chan  int);
	go dosplit(in, out, release);
	dat := <-in.dat;
	out[0].dat -< dat;
	if !both {
		<-wait
	}
	<-out[1].req;
	out[1].dat -< dat;
	release -< 0;
}

func split(in *dch, out *dch2){
	release := new(chan int);
	go dosplit(in, out, release);
	release -< 0;
}

func put(dat item, out *dch){
	<-out.req;
	out.dat -< dat;
}

func get(in *dch) item{
	seqno++;
	in.req -< seqno;
	return <-in.dat;
}

// Get one item from each of n demand channels

func getn(in *[]*dch, n int) *[]item {
	// BUG n:=len(in);
	if n != 2 { panic "bad n in getn" };
	req := new([2] *chan int);
	dat := new([2] *chan item);
	out := new([2] item);
	var i int;
	var it item;
	for i=0; i<n; i++ {
		req[i] = in[i].req;
		dat[i] = nil;
	}
	for n=2*n; n>0; n-- {
		seqno++
/*
		select{
		case req[i=] <-= seqno:
			dat[i] = in[i].dat;
			req[i] = nil;
		case it = <-dat[i=]:
			out[i] = it;
			dat[i] = nil;
		}
*/

		// simulation of select
		sel:
		for c1:=0; ; c1++ {
			for i := 0; i < 2; i++ {
				ok := false;
				if req[i] != nil { ok = req[i] -< seqno }
				if ok {
					dat[i] = in[i].dat;
					req[i] = nil;
					goto OUT; // BUG
					break sel;
				}
				ok = false;
				if dat[i] != nil { it, ok = <-dat[i] }
				if ok {
					out[i] = it;
					dat[i] = nil;
					goto OUT;  // BUG
					break sel;
				}
				sys.gosched();
			}
			sys.gosched();
		}
OUT:
	}
	return out;
}

// Get one item from each of 2 demand channels

func get2(in0 *dch, in1 *dch)  *[]item {
	x := new([2] *dch);
	x[0] = in0;
	x[1] = in1;
	return getn(x, 2);
}

func copy(in *dch, out *dch){
	for {
		<-out.req;
		out.dat -< get(in);
	}
}

func repeat(dat item, out *dch){
	for {
		put(dat, out)
	}
}

type PS *dch;	// power series
type PS2 *[2] PS; // pair of power series

var Ones PS
var Twos PS

func mkPS() *dch {
	return mkdch()
}

func mkPS2() *dch2 {
	return mkdch2()
}

// Conventions
// Upper-case for power series.
// Lower-case for rationals.
// Input variables: U,V,...
// Output variables: ...,Y,Z

// Integer gcd; needed for rational arithmetic

func gcd (u, v int64) int64{
	if u < 0 { return gcd(-u, v) }
	if u > v { return gcd(v, u) }
	if u == 0 { return v }
	return gcd(v%u, u)
}

// Make a rational from two ints and from one int

func i2tor(u, v int64) *rat{
	g := gcd(u,v);
	r := new(rat);
	if v > 0 {
		r.num = u/g;
		r.den = v/g;
	} else {
		r.num = -u/g;
		r.den = -v/g;
	}
	return r;
}

func itor(u int64) *rat{
	return i2tor(u, 1);
}

var zero *rat;
var one *rat;


// End mark and end test

var finis *rat;

func end(u *rat) int64 {
	if u.den==0 { return 1 }
	return 0
}

// Operations on rationals

func add(u, v *rat) *rat {
	g := gcd(u.den,v.den);
	return  i2tor(u.num*(v.den/g)+v.num*(u.den/g),u.den*(v.den/g));
}

func mul(u, v *rat) *rat{
	g1 := gcd(u.num,v.den);
	g2 := gcd(u.den,v.num);
	r := new(rat);
	r.num =(u.num/g1)*(v.num/g2);
	r.den = (u.den/g2)*(v.den/g1);
	return r;
}

func neg(u *rat) *rat{
	return i2tor(-u.num, u.den);
}

func sub(u, v *rat) *rat{
	return add(u, neg(v));
}

func inv(u *rat) *rat{	// invert a rat
	if u.num == 0 { panic "zero divide in inv" }
	return i2tor(u.den, u.num);
}

// print eval in floating point of PS at x=c to n terms
func
Evaln(c *rat, U PS, n int)
{
	xn := float64(1);
	x := float64(c.num)/float64(c.den);
	val := float64(0);
	for i:=0; i<n; i++ {
		u := get(U);
		if end(u) != 0 {
			break;
		}
		val = val + x * float64(u.num)/float64(u.den);
		xn = xn*x;
	}
	print val, "\n";
}

// Print n terms of a power series
func Printn(U PS, n int){
	done := false;
	for ; !done && n>0; n-- {
		u := get(U);
		if end(u) != 0 { done = true }
		else { u.pr() }
	}
	print ("\n");
}

func Print(U PS){
	Printn(U,1000000000);
}

// Evaluate n terms of power series U at x=c
func eval(c *rat, U PS, n int) *rat{
	if n==0 { return zero }
	y := get(U);
	if end(y) != 0 { return zero }
	return add(y,mul(c,eval(c,U,n-1)));
}

// Power-series constructors return channels on which power
// series flow.  They start an encapsulated generator that
// puts the terms of the series on the channel.

// Make a pair of power series identical to a given power series

func Split(U PS) *dch2{
	UU := mkdch2();
	go split(U,UU);
	return UU;
}

// Add two power series
func Add(U, V PS) PS{
	Z := mkPS();
	go func(U, V, Z PS){
		var uv *[2] *rat;
		for {
			<-Z.req;
			uv = get2(U,V);
			switch end(uv[0])+2*end(uv[1]) {
			case 0:
				Z.dat -< add(uv[0], uv[1]);
			case 1:
				Z.dat -< uv[1];
				copy(V,Z);
			case 2:
				Z.dat -< uv[0];
				copy(U,Z)
			case 3:
				Z.dat -< finis;
			}
		}
	}(U, V, Z);
	return Z;
}

// Multiply a power series by a constant
func Cmul(c *rat,U PS) PS{
	Z := mkPS();
	go func(c *rat, U, Z PS){
		done := false;
		for !done {
			<-Z.req;
			u := get(U);
			if end(u) != 0 { done = true }
			else { Z.dat -< mul(c,u) }
		}
		Z.dat -< finis;
	}(c, U, Z);
	return Z;
}

// Subtract

func Sub(U, V PS) PS{
	return Add(U, Cmul(neg(one), V));
}

// Multiply a power series by the monomial x^n

func Monmul(U PS, n int) PS{
	Z := mkPS();
	go func(n int, U PS, Z PS){
		for ; n>0; n-- { put(zero,Z) }
		copy(U,Z);
	}(n, U, Z);
	return Z;
}

// Multiply by x

func Xmul(U PS) PS{
	Monmul(U,1);
}

func Rep(c *rat) PS{
	Z := mkPS();
	go repeat(c,Z);
	return Z;
}

// Monomial c*x^n

func Mon(c *rat, n int) PS{
	Z:=mkPS();
	go func(c *rat, n int, Z PS){
		if(c.num!=0) {
			for ; n>0; n=n-1 { put(zero,Z) }
			put(c,Z);
		}
		put(finis,Z);
	}(c, n, Z);
	return Z;
}

func Shift(c *rat, U PS) PS{
	Z := mkPS();
	go func(c *rat, U, Z PS){
		put(c,Z);
		copy(U,Z);
	}(c, U, Z);
	return Z;
}

// simple pole at 1: 1/(1-x) = 1 1 1 1 1 ...

// Convert array of coefficients, constant term first
// to a (finite) power series

func Poly(a [] *rat) PS{
	Z:=mkPS();
/* BUG: NEED LEN OF ARRAY
	begin func(a [] *rat, Z PS){
		j:=0;
		done:=0;
		for j=len(a); !done&&j>0; j=j-1) 
			if(a[j-1].num!=0) done=1;
		i:=0;
		for(; i<j; i=i+1) put(a[i],Z);
		put(finis,Z);
	}();
*/
	return Z;
}

// Multiply. The algorithm is
// 	let U = u + x*UU
//	let V = v + x*VV
//	then UV = u*v + x*(u*VV+v*UU) + x*x*UU*VV

func Mul(U, V PS) PS{
	Z:=mkPS();
	go func(U, V, Z PS){
		<-Z.req;
		uv := get2(U,V);
		if end(uv[0])!=0 || end(uv[1]) != 0 {
			Z.dat -< finis;
		} else {
			Z.dat -< mul(uv[0],uv[1]);
			UU := Split(U);
			VV := Split(V);
			W := Add(Cmul(uv[0],VV[0]),Cmul(uv[1],UU[0]));
			<-Z.req;
			Z.dat -< get(W);
			copy(Add(W,Mul(UU[1],VV[1])),Z);
		}
	}(U, V, Z);
	return Z;
}

// Differentiate

func Diff(U PS) PS{
	Z:=mkPS();
	go func(U, Z PS){
		<-Z.req;
		u := get(U);
		if end(u) == 0 {
			done:=false;
			for i:=1; !done; i++ {
				u = get(U);
				if end(u) != 0 { done=true }
				else {
					Z.dat -< mul(itor(int64(i)),u);
					<-Z.req;
				}
			}
		}
		Z.dat -< finis;
	}(U, Z);
	return Z;
}

// Integrate, with const of integration
func Integ(c *rat,U PS) PS{
	Z:=mkPS();
	go func(c *rat, U, Z PS){
		put(c,Z);
		done:=false;
		for i:=1; !done; i++ {
			<-Z.req;
			u := get(U);
			if end(u) != 0 { done= true }
			Z.dat -< mul(i2tor(1,int64(i)),u);
		}
		Z.dat -< finis;
	}(c, U, Z);
	return Z;
}

// Binomial theorem (1+x)^c

func Binom(c *rat) PS{
	Z:=mkPS();
	go func(c *rat, Z PS){
		n := 1;
		t := itor(1);
		for c.num!=0 {
			put(t,Z);
			t = mul(mul(t,c),i2tor(1,int64(n)));
			c = sub(c,one);
			n++;
		}
		put(finis,Z);
	}(c, Z);
	return Z;
}

// Reciprocal of a power series
//	let U = u + x*UU
//	let Z = z + x*ZZ
//	(u+x*UU)*(z+x*ZZ) = 1
//	z = 1/u
//	u*ZZ + z*UU +x*UU*ZZ = 0
//	ZZ = -UU*(z+x*ZZ)/u;

func Recip(U PS) PS{
	Z:=mkPS();
	go func(U, Z PS){
		ZZ:=mkPS2();
		<-Z.req;
		z := inv(get(U));
		Z.dat -< z;
		split(Mul(Cmul(neg(z),U),Shift(z,ZZ[0])),ZZ);
		copy(ZZ[1],Z);
	}(U, Z);
	return Z;
}

// Exponential of a power series with constant term 0
// (nonzero constant term would make nonrational coefficients)
// bug: the constant term is simply ignored
//	Z = exp(U)
//	DZ = Z*DU
//	integrate to get Z

func Exp(U PS) PS{
	ZZ := mkPS2();
	split(Integ(one,Mul(ZZ[0],Diff(U))),ZZ);
	return ZZ[1];
}

// Substitute V for x in U, where the leading term of V is zero
//	let U = u + x*UU
//	let V = v + x*VV
// 	then S(U,V) = u + VV*S(V,UU)
// bug: a nonzero constant term is ignored

func Subst(U, V PS) PS {
	Z:= mkPS();
	go func(U, V, Z PS) {
		VV := Split(V);
		<-Z.req;
		u := get(U);
		Z.dat -< u;
		if end(u) == 0 {
			if end(get(VV[0])) != 0 { put(finis,Z); }
			else { copy(Mul(VV[0],Subst(U,VV[1])),Z); }
		}
	}(U, V, Z);
	return Z;
}

// Monomial Substition: U(c x^n)
// Each Ui is multiplied by c^i and followed by n-1 zeros

func MonSubst(U PS, c0 *rat, n int) PS {
	Z:= mkPS();
	go func(U, Z PS, c0 *rat, n int) {
		c := one;
		for {
			<-Z.req;
			u := get(U);
			Z.dat -< mul(u, c);
			c = mul(c, c0);
			if end(u) != 0 {
				Z.dat -< finis;
				break;
			}
			for i := 1; i < n; i++ {
				<-Z.req;
				Z.dat -< zero;
			}
		}
	}(U, Z, c0, n);
	return Z;
}


func Init() {
	chnameserial = -1;
	seqno = 0;
	chnames = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz";
	zero = itor(0);
	one = itor(1);
	finis = i2tor(1,0);
	Ones = Rep(one);
	Twos = Rep(itor(2));
}

func check(U PS, c *rat, count int, str string) {
	for i := 0; i < count; i++ {
		r := get(U)
		if !r.eq(c) {
			print "got: ";
			r.pr();
			print "should get ";
			c.pr();
			print "\n";
			panic str
		}
	}
}

func checka(U PS, a *[]*rat, str string) {
	for i := 0; i < len(a); i++ {
		check(U, a[i], 1, str);
	}
}

func main() {
	Init();
	if sys.argc() > 1 {  // print
		print "Ones: "; Printn(Ones, 10);
		print "Twos: "; Printn(Twos, 10);
		print "Add: "; Printn(Add(Ones, Twos), 10);
		print "Diff: "; Printn(Diff(Ones), 10);
		print "Integ: "; Printn(Integ(zero, Ones), 10);
		print "CMul: "; Printn(Cmul(neg(one), Ones), 10);
		print "Sub: "; Printn(Sub(Ones, Twos), 10);
		print "Mul: "; Printn(Mul(Ones, Ones), 10);
		print "Exp: "; Printn(Exp(Ones), 15);
		print "MonSubst: "; Printn(MonSubst(Ones, neg(one), 2), 10);
		print "ATan: "; Printn(Integ(zero, MonSubst(Ones, neg(one), 2)), 10);
	} else {  // test
		check(Ones, one, 5, "Ones");
		check(Add(Ones, Ones), itor(2), 0, "Add Ones Ones");  // 1 1 1 1 1
		check(Add(Ones, Twos), itor(3), 0, "Add Ones Twos"); // 3 3 3 3 3
		const N = 5;
		a := new([10] *rat);
		d := Diff(Ones);
		// BUG: want array initializer
		for i:=0; i < N; i++ {
			a[i] = itor(int64(i+1))
		}
		checka(d, a, "Diff");  // 1 2 3 4 5
		in := Integ(zero, Ones);
		// BUG: want array initializer
		a[0] = zero;  // integration constant
		for i:=1; i < N; i++ {
			a[i] = i2tor(1, int64(i))
		}
		checka(in, a, "Integ");  // 0 1 1/2 1/3 1/4 1/5
		check(Cmul(neg(one), Twos), itor(-2), 10, "CMul");  // -1 -1 -1 -1 -1
		check(Sub(Ones, Twos), itor(-1), 0, "Sub Ones Twos");  // -1 -1 -1 -1 -1
		m := Mul(Ones, Ones)
		// BUG: want array initializer
		for i:=0; i < N; i++ {
			a[i] = itor(int64(i+1))
		}
		checka(m, a, "Mul");  // 1 2 3 4 5
		e := Exp(Ones);
		// BUG: want array initializer
		a[0] = itor(1);
		a[1] = itor(1);
		a[2] = i2tor(3,2);
		a[3] = i2tor(13,6);
		a[4] = i2tor(73,24);
		a[5] = i2tor(167,40);
		a[6] = i2tor(4051,720);
		a[7] = i2tor(37633,5040);
		a[8] = i2tor(43817,4480);
		a[9] = i2tor(4596553,362880);
		checka(e, a, "Exp");  // 1 1 3/2 13/6 73/24
		at := Integ(zero, MonSubst(Ones, neg(one), 2));
		// BUG: want array initializer
		for c, i := 1, 0; i < N; i++ {
			if i%2 == 0 {
				a[i] = zero
			} else {
				a[i] = i2tor(int64(c), int64(i));
				c *= -1
			}
		}
		checka(at, a, "ATan");  // 0 -1 0 -1/3 0 -1/5
/*
		t := Revert(Integ(zero, MonSubst(Ones, neg(one), 2)));
		// BUG: want array initializer
		a[0] = zero;
		a[1] = itor(1);
		a[2] = zero;
		a[3] = i2tor(1,3);
		a[4] = zero;
		a[5] = i2tor(2,15);
		a[6] = zero;
		a[7] = i2tor(17,315);
		a[8] = zero;
		a[9] = i2tor(62,2835);
		checka(t, a, "Tan");  // 0 1 0 1/3 0 2/15
*/
	}
	sys.exit(0);  // BUG: force waiting goroutines to exit
}