doc/go1.16.html

<!--{
	"Title": "Go 1.16 Release Notes",
	"Path":  "/doc/go1.16"
}-->

<!--
NOTE: In this document and others in this directory, the convention is to
set fixed-width phrases with non-fixed-width spaces, as in
<code>hello</code> <code>world</code>.
Do not send CLs removing the interior tags from such phrases.
-->

<style>
  main ul li { margin: 0.5em 0; }
</style>

<h2 id="introduction">DRAFT RELEASE NOTES — Introduction to Go 1.16</h2>

<p>
  <strong>
    Go 1.16 is not yet released. These are work-in-progress
    release notes. Go 1.16 is expected to be released in February 2021.
  </strong>
</p>

<h2 id="language">Changes to the language</h2>

<p>
  TODO
</p>

<h2 id="ports">Ports</h2>

<h3 id="netbsd">NetBSD</h3>

<p><!-- golang.org/issue/30824 -->
  Go now supports the 64-bit ARM architecture on NetBSD (the
  <code>netbsd/arm64</code> port).
</p>

<h3 id="386">386</h3>

<p><!-- golang.org/issue/40255, golang.org/issue/41848, CL 258957, and CL 260017 -->
  As <a href="go1.15#386">announced</a> in the Go 1.15 release notes,
  Go 1.16 drops support for x87 mode compilation (<code>GO386=387</code>).
  Support for non-SSE2 processors is now available using soft float
  mode (<code>GO386=softfloat</code>).
  Users running on non-SSE2 processors should replace <code>GO386=387</code>
  with <code>GO386=softfloat</code>.
</p>

<h2 id="tools">Tools</h2>

<p>
  TODO
</p>

<h3 id="go-command">Go command</h3>

<h4 id="modules">Modules</h4>

<p><!-- golang.org/issue/40276 -->
  <code>go</code> <code>install</code> now accepts arguments with
  version suffixes (for example, <code>go</code> <code>install</code>
  <code>example.com/cmd@v1.0.0</code>). This causes <code>go</code>
  <code>install</code> to build and install packages in module-aware mode,
  ignoring the <code>go.mod</code> file in the current directory or any parent
  directory, if there is one. This is useful for installing executables without
  affecting the dependencies of the main module.<br>
  TODO: write and link to section in golang.org/ref/mod<br>
  TODO: write and link to blog post
</p>

<p><!-- golang.org/issue/24031 -->
  <code>retract</code> directives may now be used in a <code>go.mod</code> file
  to indicate that certain published versions of the module should not be used
  by other modules. A module author may retract a version after a severe problem
  is discovered or if the version was published unintentionally.<br>
  TODO: write and link to section in golang.org/ref/mod<br>
  TODO: write and link to tutorial or blog post
</p>

<p><!-- golang.org/issue/26603 -->
  The <code>go</code> <code>mod</code> <code>vendor</code>
  and <code>go</code> <code>mod</code> <code>tidy</code> subcommands now accept
  the <code>-e</code> flag, which instructs them to proceed despite errors in
  resolving missing packages.
</p>

<h4 id="go-test"><code>go</code> <code>test</code></h4>

<p><!-- golang.org/issue/29062 -->
  When using <code>go</code> <code>test</code>, a test that
  calls <code>os.Exit(0)</code> during execution of a test function
  will now be considered to fail.
  This will help catch cases in which a test calls code that calls
  <code>os.Exit(0)</code> and thereby stops running all future tests.
  If a <code>TestMain</code> function calls <code>os.Exit(0)</code>
  that is still considered to be a passing test.
</p>

<p><!-- golang.org/issue/37519 -->
  The <code>go</code> <code>get</code> <code>-insecure</code> flag is
  deprecated and will be removed in a future version. This flag permits
  fetching from repositories and resolving custom domains using insecure
  schemes such as HTTP, and also bypassess module sum validation using the
  checksum database. To permit the use of insecure schemes, use the
  <code>GOINSECURE</code> environment variable instead. To bypass module
  sum validation, use <code>GOPRIVATE</code> or <code>GONOSUMDB</code>.
  See <code>go</code> <code>help</code> <code>environment</code> for details.
</p>

<h4 id="all-pattern">The <code>all</code> pattern</h4>

<p><!-- golang.org/cl/240623 -->
  When the main module's <code>go.mod</code> file
  declares <code>go</code> <code>1.16</code> or higher, the <code>all</code>
  package pattern now matches only those packages that are transitively imported
  by a package or test found in the main module. (Packages imported by <em>tests
  of</em> packages imported by the main module are no longer included.) This is
  the same set of packages retained
  by <code>go</code> <code>mod</code> <code>vendor</code> since Go 1.11.
</p>

<h3 id="cgo">Cgo</h3>

<p> <!-- CL 252378 -->
  The <a href="/cmd/cgo">cgo</a> tool will no longer try to translate
  C struct bitfields into Go struct fields, even if their size can be
  represented in Go. The order in which C bitfields appear in memory
  is implementation dependent, so in some cases the cgo tool produced
  results that were silently incorrect.
</p>

<p>
  TODO
</p>

<h2 id="runtime">Runtime</h2>

<p>
  TODO
</p>

<h2 id="compiler">Compiler</h2>

<p>
  TODO
</p>

<h2 id="linker">Linker</h2>

<p>
  This release includes additional improvements to the Go linker,
  reducing linker resource usage (both time and memory) and improving
  code robustness/maintainability. These changes form the second half
  of a two-release project to
  <a href="https://golang.org/s/better-linker">modernize the Go
  linker</a>.
</p>

<p>
  The linker changes in 1.16 extend the 1.15 improvements to all
  supported architecture/OS combinations (the 1.15 performance improvements
  were primarily focused on <code>ELF</code>-based OSes and
  <code>amd64</code> architectures).  For a representative set of
  large Go programs, linking is 20-35% faster than 1.15 and requires
  5-15% less memory on average for <code>linux/amd64</code>, with larger
  improvements for other architectures and OSes.
</p>

<p>
  TODO: update with final numbers later in the release.
</p>

<!-- CL 255259: https://golang.org/cl/255259: cmd/link: enable ASLR on windows binaries built with -buildmode=c-shared -->

<h2 id="library">Core library</h2>

<p>
  TODO
</p>

<h3 id="crypto/tls"><a href="/pkg/crypto/tls">crypto/tls</a></h3>

<p><!-- CL 256897 -->
  I/O operations on closing or closed TLS connections can now be detected using
  the new <a href="/pkg/net/#ErrClosed">ErrClosed</a> error.  A typical use
  would be <code>errors.Is(err, net.ErrClosed)</code>.  In earlier releases
  the only way to reliably detect this case was to match the string returned
  by the <code>Error</code> method with <code>"tls: use of closed connection"</code>.
</p>

<h3 id="crypto/x509"><a href="/pkg/crypto/x509">crypto/x509</a></h3>

<p><!-- CL 235078 -->
  <a href="/pkg/crypto/x509/#ParseCertificate">ParseCertificate</a> and
  <a href="/pkg/crypto/x509/#CreateCertificate">CreateCertificate</a> both
  now enforce string encoding restrictions for the fields <code>DNSNames</code>,
  <code>EmailAddresses</code>, and <code>URIs</code>. These fields can only
  contain strings with characters within the ASCII range.
</p>

<h3 id="net"><a href="/pkg/net/">net</a></h3>

<p><!-- CL 250357 -->
  The case of I/O on a closed network connection, or I/O on a network
  connection that is closed before any of the I/O completes, can now
  be detected using the new <a href="/pkg/net/#ErrClosed">ErrClosed</a> error.
  A typical use would be <code>errors.Is(err, net.ErrClosed)</code>.
  In earlier releases the only way to reliably detect this case was to
  match the string returned by the <code>Error</code> method
  with <code>"use of closed network connection"</code>.
</p>

<h3 id="reflect"><a href="/pkg/reflect/">reflect</a></h3>

<p><!-- CL 259237, golang.org/issue/22075 -->
  For interface types and values, <a href="/pkg/reflect/#Value.Method">Method</a>,
  <a href="/pkg/reflect/#Value.MethodByName">MethodByName</a>, and
  <a href="/pkg/reflect/#Value.NumMethod">NumMethod</a> now
  operate on the interface's exported method set, rather than its full method set.
</p>

<h3 id="text/template/parse"><a href="/pkg/text/template/parse/">text/template/parse</a></h3>

<p><!-- CL 229398, golang.org/issue/34652 -->
  A new <a href="/pkg/text/template/parse/#CommentNode"><code>CommentNode</code></a>
  was added to the parse tree. The <a href="/pkg/text/template/parse/#Mode"><code>Mode</code></a>
  field in the <code>parse.Tree</code> enables access to it.
</p>
<!-- text/template/parse -->

<h3 id="unicode"><a href="/pkg/unicode/">unicode</a></h3>

<p><!-- CL 248765 -->
  The <a href="/pkg/unicode/"><code>unicode</code></a> package and associated
  support throughout the system has been upgraded from Unicode 12.0.0 to
  <a href="https://www.unicode.org/versions/Unicode13.0.0/">Unicode 13.0.0</a>,
  which adds 5,930 new characters, including four new scripts, and 55 new emoji.
  Unicode 13.0.0 also designates plane 3 (U+30000-U+3FFFF) as the tertiary
  ideographic plane.
</p>

<h3 id="minor_library_changes">Minor changes to the library</h3>

<p>
  As always, there are various minor changes and updates to the library,
  made with the Go 1 <a href="/doc/go1compat">promise of compatibility</a>
  in mind.
</p>

<p>
  TODO
</p>

<dl id="crypto/dsa"><dt><a href="/pkg/crypto/dsa/">crypto/dsa</a></dt>
  <dd>
    <p><!-- CL 257939 -->
      The <a href="/pkg/crypto/dsa/"><code>crypto/dsa</code></a> package is now deprecated.
      See <a href="https://golang.org/issue/40337">issue #40337</a>.
    </p>
  </dd>
</dl><!-- crypto/dsa -->

<dl id="crypto/x509"><dt><a href="/pkg/crypto/x509/">crypto/x509</a></dt>
  <dd>
    <p><!-- CL 257939 -->
      DSA signature verification is no longer supported. Note that DSA signature
      generation was never supported.
      See <a href="https://golang.org/issue/40337">issue #40337</a>.
    </p>
  </dd>
</dl><!-- crypto/x509 -->

<dl id="net/http"><dt><a href="/pkg/net/http/">net/http</a></dt>
  <dd>
    <p><!-- CL 233637 -->
      In the <a href="/pkg/net/http/"><code>net/http</code></a> package, the
      behavior of <a href="/pkg/net/http/#StripPrefix"><code>StripPrefix</code></a>
      has been changed to strip the prefix from the request URL's
      <code>RawPath</code> field in addition to its <code>Path</code> field.
      In past releases, only the <code>Path</code> field was trimmed, and so if the
      request URL contained any escaped characters the URL would be modified to
      have mismatched <code>Path</code> and <code>RawPath</code> fields.
      In Go 1.16, <code>StripPrefix</code> trims both fields.
      If there are escaped characters in the prefix part of the request URL the
      handler serves a 404 instead of its previous behavior of invoking the
      underlying handler with a mismatched <code>Path</code>/<code>RawPath</code> pair.
    </p>

    <p><!-- CL 252497 -->
     The <a href="/pkg/net/http/"><code>net/http</code></a> package now rejects HTTP range requests
     of the form <code>"Range": "bytes=--N"</code> where <code>"-N"</code> is a negative suffix length, for
     example <code>"Range": "bytes=--2"</code>. It now replies with a <code>416 "Range Not Satisfiable"</code> response.
    </p>

    <p><!-- CL 256498, golang.org/issue/36990 -->
    Cookies set with <code>SameSiteDefaultMode</code> now behave according to the current
    spec (no attribute is set) instead of generating a SameSite key without a value.
    </p>
  </dd>
</dl><!-- net/http -->

<dl id="runtime/debug"><dt><a href="/pkg/runtime/debug/">runtime/debug</a></dt>
  <dd>
    <p><!-- CL 249677 -->
      TODO: <a href="https://golang.org/cl/249677">https://golang.org/cl/249677</a>: provide Addr method for errors from SetPanicOnFault
    </p>
  </dd>
</dl><!-- runtime/debug -->