// Copyright 2011 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.

// Package base32 implements base32 encoding as specified by RFC 4648.
package base32

import (
	"io"
	"math"
	"slices"
	"strconv"
)

/*
 * Encodings
 */

// An Encoding is a radix 32 encoding/decoding scheme, defined by a
// 32-character alphabet. The most common is the "base32" encoding
// introduced for SASL GSSAPI and standardized in RFC 4648.
// The alternate "base32hex" encoding is used in DNSSEC.
type Encoding struct {
	encode    [32]byte   // mapping of symbol index to symbol byte value
	decodeMap [256]uint8 // mapping of symbol byte value to symbol index
	padChar   rune
}

const (
	StdPadding rune = '=' // Standard padding character
	NoPadding  rune = -1  // No padding
)

const (
	decodeMapInitialize = "" +
		"\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff" +
		"\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff" +
		"\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff" +
		"\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff" +
		"\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff" +
		"\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff" +
		"\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff" +
		"\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff" +
		"\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff" +
		"\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff" +
		"\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff" +
		"\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff" +
		"\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff" +
		"\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff" +
		"\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff" +
		"\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff"
	invalidIndex = '\xff'
)

// NewEncoding returns a new padded Encoding defined by the given alphabet,
// which must be a 32-byte string that contains unique byte values and
// does not contain the padding character or CR / LF ('\r', '\n').
// The alphabet is treated as a sequence of byte values
// without any special treatment for multi-byte UTF-8.
// The resulting Encoding uses the default padding character ('='),
// which may be changed or disabled via [Encoding.WithPadding].
func NewEncoding(encoder string) *Encoding {
	if len(encoder) != 32 {
		panic("encoding alphabet is not 32-bytes long")
	}

	e := new(Encoding)
	e.padChar = StdPadding
	copy(e.encode[:], encoder)
	copy(e.decodeMap[:], decodeMapInitialize)

	for i := 0; i < len(encoder); i++ {
		// Note: While we document that the alphabet cannot contain
		// the padding character, we do not enforce it since we do not know
		// if the caller intends to switch the padding from StdPadding later.
		switch {
		case encoder[i] == '\n' || encoder[i] == '\r':
			panic("encoding alphabet contains newline character")
		case e.decodeMap[encoder[i]] != invalidIndex:
			panic("encoding alphabet includes duplicate symbols")
		}
		e.decodeMap[encoder[i]] = uint8(i)
	}
	return e
}

// StdEncoding is the standard base32 encoding, as defined in RFC 4648.
var StdEncoding = NewEncoding("ABCDEFGHIJKLMNOPQRSTUVWXYZ234567")

// HexEncoding is the “Extended Hex Alphabet” defined in RFC 4648.
// It is typically used in DNS.
var HexEncoding = NewEncoding("0123456789ABCDEFGHIJKLMNOPQRSTUV")

// WithPadding creates a new encoding identical to enc except
// with a specified padding character, or NoPadding to disable padding.
// The padding character must not be '\r' or '\n',
// must not be contained in the encoding's alphabet,
// must not be negative, and must be a rune equal or below '\xff'.
// Padding characters above '\x7f' are encoded as their exact byte value
// rather than using the UTF-8 representation of the codepoint.
func (enc Encoding) WithPadding(padding rune) *Encoding {
	switch {
	case padding < NoPadding || padding == '\r' || padding == '\n' || padding > 0xff:
		panic("invalid padding")
	case padding != NoPadding && enc.decodeMap[byte(padding)] != invalidIndex:
		panic("padding contained in alphabet")
	}
	enc.padChar = padding
	return &enc
}

/*
 * Encoder
 */

// Encode encodes src using the encoding enc,
// writing [Encoding.EncodedLen](len(src)) bytes to dst.
//
// The encoding pads the output to a multiple of 8 bytes,
// so Encode is not appropriate for use on individual blocks
// of a large data stream. Use [NewEncoder] instead.
func (enc *Encoding) Encode(dst, src []byte) {
	if len(src) == 0 {
		return
	}
	// enc is a pointer receiver, so the use of enc.encode within the hot
	// loop below means a nil check at every operation. Lift that nil check
	// outside of the loop to speed up the encoder.
	_ = enc.encode

	for len(src) >= 5 {
		// Combining two 32 bit loads allows the same code to be used
		// for 32 and 64 bit platforms.
		hi := uint32(src[0])<<24 | uint32(src[1])<<16 | uint32(src[2])<<8 | uint32(src[3])
		lo := hi<<8 | uint32(src[4])

		_ = dst[7] // Eliminate bounds checks below.
		dst[0] = enc.encode[(hi>>27)&0x1F]
		dst[1] = enc.encode[(hi>>22)&0x1F]
		dst[2] = enc.encode[(hi>>17)&0x1F]
		dst[3] = enc.encode[(hi>>12)&0x1F]
		dst[4] = enc.encode[(hi>>7)&0x1F]
		dst[5] = enc.encode[(hi>>2)&0x1F]
		dst[6] = enc.encode[(lo>>5)&0x1F]
		dst[7] = enc.encode[(lo)&0x1F]

		src = src[5:]
		dst = dst[8:]
	}

	// Add the remaining small block
	if len(src) == 0 {
		return
	}

	// Encode the remaining bytes in reverse order.
	val := uint32(0)
	switch len(src) {
	case 4:
		val |= uint32(src[3])
		dst[6] = enc.encode[val<<3&0x1F]
		dst[5] = enc.encode[val>>2&0x1F]
		fallthrough
	case 3:
		val |= uint32(src[2]) << 8
		dst[4] = enc.encode[val>>7&0x1F]
		fallthrough
	case 2:
		val |= uint32(src[1]) << 16
		dst[3] = enc.encode[val>>12&0x1F]
		dst[2] = enc.encode[val>>17&0x1F]
		fallthrough
	case 1:
		val |= uint32(src[0]) << 24
		dst[1] = enc.encode[val>>22&0x1F]
		dst[0] = enc.encode[val>>27&0x1F]
	}

	// Pad the final quantum
	if enc.padChar != NoPadding {
		nPad := (len(src) * 8 / 5) + 1
		for i := nPad; i < 8; i++ {
			dst[i] = byte(enc.padChar)
		}
	}
}

// AppendEncode appends the base32 encoded src to dst
// and returns the extended buffer.
func (enc *Encoding) AppendEncode(dst, src []byte) []byte {
	n := enc.EncodedLen(len(src))
	dst = slices.Grow(dst, n)
	enc.Encode(dst[len(dst):][:n], src)
	return dst[:len(dst)+n]
}

// EncodeToString returns the base32 encoding of src.
func (enc *Encoding) EncodeToString(src []byte) string {
	buf := make([]byte, enc.EncodedLen(len(src)))
	enc.Encode(buf, src)
	return string(buf)
}

type encoder struct {
	err  error
	enc  *Encoding
	w    io.Writer
	buf  [5]byte    // buffered data waiting to be encoded
	nbuf int        // number of bytes in buf
	out  [1024]byte // output buffer
}

func (e *encoder) Write(p []byte) (n int, err error) {
	if e.err != nil {
		return 0, e.err
	}

	// Leading fringe.
	if e.nbuf > 0 {
		var i int
		for i = 0; i < len(p) && e.nbuf < 5; i++ {
			e.buf[e.nbuf] = p[i]
			e.nbuf++
		}
		n += i
		p = p[i:]
		if e.nbuf < 5 {
			return
		}
		e.enc.Encode(e.out[0:], e.buf[0:])
		if _, e.err = e.w.Write(e.out[0:8]); e.err != nil {
			return n, e.err
		}
		e.nbuf = 0
	}

	// Large interior chunks.
	for len(p) >= 5 {
		nn := len(e.out) / 8 * 5
		if nn > len(p) {
			nn = len(p)
			nn -= nn % 5
		}
		e.enc.Encode(e.out[0:], p[0:nn])
		if _, e.err = e.w.Write(e.out[0 : nn/5*8]); e.err != nil {
			return n, e.err
		}
		n += nn
		p = p[nn:]
	}

	// Trailing fringe.
	copy(e.buf[:], p)
	e.nbuf = len(p)
	n += len(p)
	return
}

// Close flushes any pending output from the encoder.
// It is an error to call Write after calling Close.
func (e *encoder) Close() error {
	// If there's anything left in the buffer, flush it out
	if e.err == nil && e.nbuf > 0 {
		e.enc.Encode(e.out[0:], e.buf[0:e.nbuf])
		encodedLen := e.enc.EncodedLen(e.nbuf)
		e.nbuf = 0
		_, e.err = e.w.Write(e.out[0:encodedLen])
	}
	return e.err
}

// NewEncoder returns a new base32 stream encoder. Data written to
// the returned writer will be encoded using enc and then written to w.
// Base32 encodings operate in 5-byte blocks; when finished
// writing, the caller must Close the returned encoder to flush any
// partially written blocks.
func NewEncoder(enc *Encoding, w io.Writer) io.WriteCloser {
	return &encoder{enc: enc, w: w}
}

// EncodedLen returns the length in bytes of the base32 encoding
// of an input buffer of length n.
// It panics if the encoded length overflows int,
// which can happen only if n > [math.MaxInt]/8*5.
func (enc *Encoding) EncodedLen(n int) int {
	if enc.padChar == NoPadding {
		if n > math.MaxInt/8*5+4 {
			panic("encoded length overflows int")
		}
		return n/5*8 + (n%5*8+4)/5
	}
	if n > math.MaxInt/8*5 {
		panic("encoded length overflows int")
	}
	return (n + 4) / 5 * 8
}

/*
 * Decoder
 */

type CorruptInputError int64

func (e CorruptInputError) Error() string {
	return "illegal base32 data at input byte " + strconv.FormatInt(int64(e), 10)
}

// decode is like Decode but returns an additional 'end' value, which
// indicates if end-of-message padding was encountered and thus any
// additional data is an error. This method assumes that src has been
// stripped of all supported whitespace ('\r' and '\n').
func (enc *Encoding) decode(dst, src []byte) (n int, end bool, err error) {
	// Lift the nil check outside of the loop.
	_ = enc.decodeMap

	dsti := 0
	olen := len(src)

	for len(src) > 0 && !end {
		// Decode quantum using the base32 alphabet
		var dbuf [8]byte
		dlen := 8

		for j := 0; j < 8; {

			if len(src) == 0 {
				if enc.padChar != NoPadding {
					// We have reached the end and are missing padding
					return n, false, CorruptInputError(olen - len(src) - j)
				}
				// We have reached the end and are not expecting any padding
				dlen, end = j, true
				break
			}
			in := src[0]
			src = src[1:]
			if in == byte(enc.padChar) && j >= 2 && len(src) < 8 {
				// We've reached the end and there's padding
				if len(src)+j < 8-1 {
					// not enough padding
					return n, false, CorruptInputError(olen)
				}
				for k := 0; k < 8-1-j; k++ {
					if len(src) > k && src[k] != byte(enc.padChar) {
						// incorrect padding
						return n, false, CorruptInputError(olen - len(src) + k - 1)
					}
				}
				dlen, end = j, true
				// 7, 5 and 2 are not valid padding lengths, and so 1, 3 and 6 are not
				// valid dlen values. See RFC 4648 Section 6 "Base 32 Encoding" listing
				// the five valid padding lengths, and Section 9 "Illustrations and
				// Examples" for an illustration for how the 1st, 3rd and 6th base32
				// src bytes do not yield enough information to decode a dst byte.
				if dlen == 1 || dlen == 3 || dlen == 6 {
					return n, false, CorruptInputError(olen - len(src) - 1)
				}
				break
			}
			dbuf[j] = enc.decodeMap[in]
			if dbuf[j] == 0xFF {
				return n, false, CorruptInputError(olen - len(src) - 1)
			}
			j++
		}

		// Pack 8x 5-bit source blocks into 5 byte destination
		// quantum
		switch dlen {
		case 8:
			dst[dsti+4] = dbuf[6]<<5 | dbuf[7]
			n++
			fallthrough
		case 7:
			dst[dsti+3] = dbuf[4]<<7 | dbuf[5]<<2 | dbuf[6]>>3
			n++
			fallthrough
		case 5:
			dst[dsti+2] = dbuf[3]<<4 | dbuf[4]>>1
			n++
			fallthrough
		case 4:
			dst[dsti+1] = dbuf[1]<<6 | dbuf[2]<<1 | dbuf[3]>>4
			n++
			fallthrough
		case 2:
			dst[dsti+0] = dbuf[0]<<3 | dbuf[1]>>2
			n++
		}
		dsti += 5
	}
	return n, end, nil
}

// Decode decodes src using the encoding enc. It writes at most
// [Encoding.DecodedLen](len(src)) bytes to dst and returns the number of bytes
// written. The caller must ensure that dst is large enough to hold all
// the decoded data. If src contains invalid base32 data, it will return the
// number of bytes successfully written and [CorruptInputError].
// Newline characters (\r and \n) are ignored.
func (enc *Encoding) Decode(dst, src []byte) (n int, err error) {
	buf := make([]byte, len(src))
	l := stripNewlines(buf, src)
	n, _, err = enc.decode(dst, buf[:l])
	return
}

// AppendDecode appends the base32 decoded src to dst
// and returns the extended buffer.
// If the input is malformed, it returns the partially decoded src and an error.
// New line characters (\r and \n) are ignored.
func (enc *Encoding) AppendDecode(dst, src []byte) ([]byte, error) {
	// Compute the output size without padding to avoid over allocating.
	n := len(src)
	for n > 0 && rune(src[n-1]) == enc.padChar {
		n--
	}
	n = decodedLen(n, NoPadding)

	dst = slices.Grow(dst, n)
	n, err := enc.Decode(dst[len(dst):][:n], src)
	return dst[:len(dst)+n], err
}

// DecodeString returns the bytes represented by the base32 string s.
// If the input is malformed, it returns the partially decoded data and
// [CorruptInputError]. New line characters (\r and \n) are ignored.
func (enc *Encoding) DecodeString(s string) ([]byte, error) {
	buf := []byte(s)
	l := stripNewlines(buf, buf)
	n, _, err := enc.decode(buf, buf[:l])
	return buf[:n], err
}

type decoder struct {
	err    error
	enc    *Encoding
	r      io.Reader
	end    bool       // saw end of message
	buf    [1024]byte // leftover input
	nbuf   int
	out    []byte // leftover decoded output
	outbuf [1024 / 8 * 5]byte
}

func readEncodedData(r io.Reader, buf []byte, min int, expectsPadding bool) (n int, err error) {
	for n < min && err == nil {
		var nn int
		nn, err = r.Read(buf[n:])
		n += nn
	}
	// data was read, less than min bytes could be read
	if n < min && n > 0 && err == io.EOF {
		err = io.ErrUnexpectedEOF
	}
	// no data was read, the buffer already contains some data
	// when padding is disabled this is not an error, as the message can be of
	// any length
	if expectsPadding && min < 8 && n == 0 && err == io.EOF {
		err = io.ErrUnexpectedEOF
	}
	return
}

func (d *decoder) Read(p []byte) (n int, err error) {
	// Use leftover decoded output from last read.
	if len(d.out) > 0 {
		n = copy(p, d.out)
		d.out = d.out[n:]
		if len(d.out) == 0 {
			return n, d.err
		}
		return n, nil
	}

	if d.err != nil {
		return 0, d.err
	}

	// Read a chunk.
	nn := (len(p) + 4) / 5 * 8
	if nn < 8 {
		nn = 8
	}
	if nn > len(d.buf) {
		nn = len(d.buf)
	}

	// Minimum amount of bytes that needs to be read each cycle
	var min int
	var expectsPadding bool
	if d.enc.padChar == NoPadding {
		min = 1
		expectsPadding = false
	} else {
		min = 8 - d.nbuf
		expectsPadding = true
	}

	nn, d.err = readEncodedData(d.r, d.buf[d.nbuf:nn], min, expectsPadding)
	d.nbuf += nn
	if d.nbuf < min {
		return 0, d.err
	}
	if nn > 0 && d.end {
		return 0, CorruptInputError(0)
	}

	// Decode chunk into p, or d.out and then p if p is too small.
	var nr int
	if d.enc.padChar == NoPadding {
		nr = d.nbuf
	} else {
		nr = d.nbuf / 8 * 8
	}
	nw := d.enc.DecodedLen(d.nbuf)

	if nw > len(p) {
		nw, d.end, err = d.enc.decode(d.outbuf[0:], d.buf[0:nr])
		d.out = d.outbuf[0:nw]
		n = copy(p, d.out)
		d.out = d.out[n:]
	} else {
		n, d.end, err = d.enc.decode(p, d.buf[0:nr])
	}
	d.nbuf -= nr
	for i := 0; i < d.nbuf; i++ {
		d.buf[i] = d.buf[i+nr]
	}

	if err != nil && (d.err == nil || d.err == io.EOF) {
		d.err = err
	}

	if len(d.out) > 0 {
		// We cannot return all the decoded bytes to the caller in this
		// invocation of Read, so we return a nil error to ensure that Read
		// will be called again.  The error stored in d.err, if any, will be
		// returned with the last set of decoded bytes.
		return n, nil
	}

	return n, d.err
}

type newlineFilteringReader struct {
	wrapped io.Reader
}

// stripNewlines removes newline characters and returns the number
// of non-newline characters copied to dst.
func stripNewlines(dst, src []byte) int {
	offset := 0
	for _, b := range src {
		if b == '\r' || b == '\n' {
			continue
		}
		dst[offset] = b
		offset++
	}
	return offset
}

func (r *newlineFilteringReader) Read(p []byte) (int, error) {
	n, err := r.wrapped.Read(p)
	for n > 0 {
		s := p[0:n]
		offset := stripNewlines(s, s)
		if err != nil || offset > 0 {
			return offset, err
		}
		// Previous buffer entirely whitespace, read again
		n, err = r.wrapped.Read(p)
	}
	return n, err
}

// NewDecoder constructs a new base32 stream decoder.
func NewDecoder(enc *Encoding, r io.Reader) io.Reader {
	return &decoder{enc: enc, r: &newlineFilteringReader{r}}
}

// DecodedLen returns the maximum length in bytes of the decoded data
// corresponding to n bytes of base32-encoded data.
func (enc *Encoding) DecodedLen(n int) int {
	return decodedLen(n, enc.padChar)
}

func decodedLen(n int, padChar rune) int {
	if padChar == NoPadding {
		return n/8*5 + n%8*5/8
	}
	return n / 8 * 5
}