blob: 5f2e17d8d4c62f3ef2b427fbdbf551503179afb7 [file] [log] [blame]
#!/usr/bin/env python
#
# Copyright 2007-2009 Google Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
'''Mercurial interface to codereview.appspot.com.
To configure, set the following options in
your repository's .hg/hgrc file.
[extensions]
codereview = path/to/codereview.py
[codereview]
server = codereview.appspot.com
The server should be running Rietveld; see http://code.google.com/p/rietveld/.
In addition to the new commands, this extension introduces
the file pattern syntax @nnnnnn, where nnnnnn is a change list
number, to mean the files included in that change list, which
must be associated with the current client.
For example, if change 123456 contains the files x.go and y.go,
"hg diff @123456" is equivalent to"hg diff x.go y.go".
'''
from mercurial import cmdutil, commands, hg, util, error, match
from mercurial.node import nullrev, hex, nullid, short
import os, re
import stat
import subprocess
import threading
from HTMLParser import HTMLParser
from xml.etree import ElementTree as ET
try:
hgversion = util.version()
except:
from mercurial.version import version as v
hgversion = v.get_version()
oldMessage = """
The code review extension requires Mercurial 1.3 or newer.
To install a new Mercurial,
sudo easy_install mercurial
works on most systems.
"""
linuxMessage = """
You may need to clear your current Mercurial installation by running:
sudo apt-get remove mercurial mercurial-common
sudo rm -rf /etc/mercurial
"""
if hgversion < '1.3':
msg = oldMessage
if os.access("/etc/mercurial", 0):
msg += linuxMessage
raise util.Abort(msg)
# To experiment with Mercurial in the python interpreter:
# >>> repo = hg.repository(ui.ui(), path = ".")
#######################################################################
# Normally I would split this into multiple files, but it simplifies
# import path headaches to keep it all in one file. Sorry.
import sys
if __name__ == "__main__":
print >>sys.stderr, "This is a Mercurial extension and should not be invoked directly."
sys.exit(2)
#######################################################################
# Change list parsing.
#
# Change lists are stored in .hg/codereview/cl.nnnnnn
# where nnnnnn is the number assigned by the code review server.
# Most data about a change list is stored on the code review server
# too: the description, reviewer, and cc list are all stored there.
# The only thing in the cl.nnnnnn file is the list of relevant files.
# Also, the existence of the cl.nnnnnn file marks this repository
# as the one where the change list lives.
class CL(object):
def __init__(self, name):
self.name = name
self.desc = ''
self.files = []
self.reviewer = []
self.cc = []
self.url = ''
self.local = False
self.web = False
self.original_author = None # None means current user
def DiskText(self):
cl = self
s = ""
if cl.original_author:
s += "Author: " + cl.original_author + "\n\n"
s += "Description:\n"
s += Indent(cl.desc, "\t")
s += "Files:\n"
for f in cl.files:
s += "\t" + f + "\n"
return s
def EditorText(self):
cl = self
s = _change_prolog
s += "\n"
if cl.original_author:
s += "Author: " + cl.original_author + "\n"
if cl.url != '':
s += 'URL: ' + cl.url + ' # cannot edit\n\n'
s += "Reviewer: " + JoinComma(cl.reviewer) + "\n"
s += "CC: " + JoinComma(cl.cc) + "\n"
s += "\n"
s += "Description:\n"
if cl.desc == '':
s += "\t<enter description here>\n"
else:
s += Indent(cl.desc, "\t")
s += "\n"
if cl.local or cl.name == "new":
s += "Files:\n"
for f in cl.files:
s += "\t" + f + "\n"
s += "\n"
return s
def PendingText(self):
cl = self
s = cl.name + ":" + "\n"
s += Indent(cl.desc, "\t")
s += "\n"
if cl.original_author:
s += "\tAuthor: " + cl.original_author + "\n"
s += "\tReviewer: " + JoinComma(cl.reviewer) + "\n"
s += "\tCC: " + JoinComma(cl.cc) + "\n"
s += "\tFiles:\n"
for f in cl.files:
s += "\t\t" + f + "\n"
return s
def Flush(self, ui, repo):
if self.name == "new":
self.Upload(ui, repo, gofmt_just_warn=True)
dir = CodeReviewDir(ui, repo)
path = dir + '/cl.' + self.name
f = open(path+'!', "w")
f.write(self.DiskText())
f.close()
os.rename(path+'!', path)
if self.web and not self.original_author:
EditDesc(self.name, desc=self.desc,
reviewers=JoinComma(self.reviewer), cc=JoinComma(self.cc))
def Delete(self, ui, repo):
dir = CodeReviewDir(ui, repo)
os.unlink(dir + "/cl." + self.name)
def Subject(self):
s = line1(self.desc)
if len(s) > 60:
s = s[0:55] + "..."
if self.name != "new":
s = "code review %s: %s" % (self.name, s)
return s
def Upload(self, ui, repo, send_mail=False, gofmt=True, gofmt_just_warn=False):
if ui.configbool("codereview", "force_gofmt", True) and gofmt:
CheckGofmt(ui, repo, self.files, just_warn=gofmt_just_warn)
os.chdir(repo.root)
form_fields = [
("content_upload", "1"),
("reviewers", JoinComma(self.reviewer)),
("cc", JoinComma(self.cc)),
("description", self.desc),
("base_hashes", ""),
# Would prefer not to change the subject
# on reupload, but /upload requires it.
("subject", self.Subject()),
]
# NOTE(rsc): This duplicates too much of RealMain,
# but RealMain doesn't have the most reusable interface.
if self.name != "new":
form_fields.append(("issue", self.name))
vcs = GuessVCS(upload_options)
data = vcs.GenerateDiff(self.files)
files = vcs.GetBaseFiles(data)
if len(data) > MAX_UPLOAD_SIZE:
uploaded_diff_file = []
form_fields.append(("separate_patches", "1"))
else:
uploaded_diff_file = [("data", "data.diff", data)]
ctype, body = EncodeMultipartFormData(form_fields, uploaded_diff_file)
response_body = MySend("/upload", body, content_type=ctype)
patchset = None
msg = response_body
lines = msg.splitlines()
if len(lines) >= 2:
msg = lines[0]
patchset = lines[1].strip()
patches = [x.split(" ", 1) for x in lines[2:]]
ui.status(msg + "\n")
if not response_body.startswith("Issue created.") and not response_body.startswith("Issue updated."):
raise util.Abort("failed to update issue: " + response_body)
issue = msg[msg.rfind("/")+1:]
self.name = issue
if not self.url:
self.url = server_url_base + self.name
if not uploaded_diff_file:
patches = UploadSeparatePatches(issue, rpc, patchset, data, upload_options)
vcs.UploadBaseFiles(issue, rpc, patches, patchset, upload_options, files)
if send_mail:
MySend("/" + issue + "/mail", payload="")
self.web = True
self.Flush(ui, repo)
return
def GoodCLName(name):
return re.match("^[0-9]+$", name)
def ParseCL(text, name):
sname = None
lineno = 0
sections = {
'Author': '',
'Description': '',
'Files': '',
'URL': '',
'Reviewer': '',
'CC': '',
}
for line in text.split('\n'):
lineno += 1
line = line.rstrip()
if line != '' and line[0] == '#':
continue
if line == '' or line[0] == ' ' or line[0] == '\t':
if sname == None and line != '':
return None, lineno, 'text outside section'
if sname != None:
sections[sname] += line + '\n'
continue
p = line.find(':')
if p >= 0:
s, val = line[:p].strip(), line[p+1:].strip()
if s in sections:
sname = s
if val != '':
sections[sname] += val + '\n'
continue
return None, lineno, 'malformed section header'
for k in sections:
sections[k] = StripCommon(sections[k]).rstrip()
cl = CL(name)
if sections['Author']:
cl.original_author = sections['Author']
cl.desc = sections['Description']
for line in sections['Files'].split('\n'):
i = line.find('#')
if i >= 0:
line = line[0:i].rstrip()
if line == '':
continue
cl.files.append(line)
cl.reviewer = SplitCommaSpace(sections['Reviewer'])
cl.cc = SplitCommaSpace(sections['CC'])
cl.url = sections['URL']
if cl.desc == '<enter description here>':
cl.desc = '';
return cl, 0, ''
def SplitCommaSpace(s):
return s.replace(",", " ").split()
def CutDomain(s):
i = s.find('@')
if i >= 0:
s = s[0:i]
return s
def JoinComma(l):
return ", ".join(l)
def ExceptionDetail():
s = str(sys.exc_info()[0])
if s.startswith("<type '") and s.endswith("'>"):
s = s[7:-2]
elif s.startswith("<class '") and s.endswith("'>"):
s = s[8:-2]
arg = str(sys.exc_info()[1])
if len(arg) > 0:
s += ": " + arg
return s
def IsLocalCL(ui, repo, name):
return GoodCLName(name) and os.access(CodeReviewDir(ui, repo) + "/cl." + name, 0)
# Load CL from disk and/or the web.
def LoadCL(ui, repo, name, web=True):
if not GoodCLName(name):
return None, "invalid CL name"
dir = CodeReviewDir(ui, repo)
path = dir + "cl." + name
if os.access(path, 0):
ff = open(path)
text = ff.read()
ff.close()
cl, lineno, err = ParseCL(text, name)
if err != "":
return None, "malformed CL data: "+err
cl.local = True
else:
cl = CL(name)
if web:
try:
f = GetSettings(name)
except:
return None, "cannot load CL %s from code review server: %s" % (name, ExceptionDetail())
if 'reviewers' not in f:
return None, "malformed response loading CL data from code review server"
cl.reviewer = SplitCommaSpace(f['reviewers'])
cl.cc = SplitCommaSpace(f['cc'])
cl.desc = f['description']
cl.url = server_url_base + name
cl.web = True
return cl, ''
class LoadCLThread(threading.Thread):
def __init__(self, ui, repo, dir, f, web):
threading.Thread.__init__(self)
self.ui = ui
self.repo = repo
self.dir = dir
self.f = f
self.web = web
self.cl = None
def run(self):
cl, err = LoadCL(self.ui, self.repo, self.f[3:], web=self.web)
if err != '':
self.ui.warn("loading "+self.dir+self.f+": " + err + "\n")
return
self.cl = cl
# Load all the CLs from this repository.
def LoadAllCL(ui, repo, web=True):
dir = CodeReviewDir(ui, repo)
m = {}
files = [f for f in os.listdir(dir) if f.startswith('cl.')]
if not files:
return m
active = []
first = True
for f in files:
t = LoadCLThread(ui, repo, dir, f, web)
t.start()
if web and first:
# first request: wait in case it needs to authenticate
# otherwise we get lots of user/password prompts
# running in parallel.
t.join()
if t.cl:
m[t.cl.name] = t.cl
first = False
else:
active.append(t)
for t in active:
t.join()
if t.cl:
m[t.cl.name] = t.cl
return m
# Find repository root. On error, ui.warn and return None
def RepoDir(ui, repo):
url = repo.url();
if not url.startswith('file:/'):
ui.warn("repository %s is not in local file system\n" % (url,))
return None
url = url[5:]
if url.endswith('/'):
url = url[:-1]
return url
# Find (or make) code review directory. On error, ui.warn and return None
def CodeReviewDir(ui, repo):
dir = RepoDir(ui, repo)
if dir == None:
return None
dir += '/.hg/codereview/'
if not os.path.isdir(dir):
try:
os.mkdir(dir, 0700)
except:
ui.warn('cannot mkdir %s: %s\n' % (dir, ExceptionDetail()))
return None
return dir
# Strip maximal common leading white space prefix from text
def StripCommon(text):
ws = None
for line in text.split('\n'):
line = line.rstrip()
if line == '':
continue
white = line[:len(line)-len(line.lstrip())]
if ws == None:
ws = white
else:
common = ''
for i in range(min(len(white), len(ws))+1):
if white[0:i] == ws[0:i]:
common = white[0:i]
ws = common
if ws == '':
break
if ws == None:
return text
t = ''
for line in text.split('\n'):
line = line.rstrip()
if line.startswith(ws):
line = line[len(ws):]
if line == '' and t == '':
continue
t += line + '\n'
while len(t) >= 2 and t[-2:] == '\n\n':
t = t[:-1]
return t
# Indent text with indent.
def Indent(text, indent):
t = ''
for line in text.split('\n'):
t += indent + line + '\n'
return t
# Return the first line of l
def line1(text):
return text.split('\n')[0]
_change_prolog = """# Change list.
# Lines beginning with # are ignored.
# Multi-line values should be indented.
"""
#######################################################################
# Mercurial helper functions
# Return list of changed files in repository that match pats.
def ChangedFiles(ui, repo, pats, opts):
# Find list of files being operated on.
matcher = cmdutil.match(repo, pats, opts)
node1, node2 = cmdutil.revpair(repo, None)
modified, added, removed = repo.status(node1, node2, matcher)[:3]
l = modified + added + removed
l.sort()
return l
# Return list of changed files in repository that match pats and still exist.
def ChangedExistingFiles(ui, repo, pats, opts):
matcher = cmdutil.match(repo, pats, opts)
node1, node2 = cmdutil.revpair(repo, None)
modified, added, _ = repo.status(node1, node2, matcher)[:3]
l = modified + added
l.sort()
return l
# Return list of files claimed by existing CLs
def TakenFiles(ui, repo):
return Taken(ui, repo).keys()
def Taken(ui, repo):
all = LoadAllCL(ui, repo, web=False)
taken = {}
for _, cl in all.items():
for f in cl.files:
taken[f] = cl
return taken
# Return list of changed files that are not claimed by other CLs
def DefaultFiles(ui, repo, pats, opts):
return Sub(ChangedFiles(ui, repo, pats, opts), TakenFiles(ui, repo))
def Sub(l1, l2):
return [l for l in l1 if l not in l2]
def Add(l1, l2):
l = l1 + Sub(l2, l1)
l.sort()
return l
def Intersect(l1, l2):
return [l for l in l1 if l in l2]
def getremote(ui, repo, opts):
# save $http_proxy; creating the HTTP repo object will
# delete it in an attempt to "help"
proxy = os.environ.get('http_proxy')
source, _, _ = hg.parseurl(ui.expandpath("default"), None)
other = hg.repository(cmdutil.remoteui(repo, opts), source)
if proxy is not None:
os.environ['http_proxy'] = proxy
return other
def Incoming(ui, repo, opts):
_, incoming, _ = repo.findcommonincoming(getremote(ui, repo, opts))
return incoming
def EditCL(ui, repo, cl):
s = cl.EditorText()
while True:
s = ui.edit(s, ui.username())
clx, line, err = ParseCL(s, cl.name)
if err != '':
if ui.prompt("error parsing change list: line %d: %s\nre-edit (y/n)?" % (line, err), ["&yes", "&no"], "y") == "n":
return "change list not modified"
continue
cl.desc = clx.desc;
cl.reviewer = clx.reviewer
cl.cc = clx.cc
cl.files = clx.files
if cl.desc == '':
if ui.prompt("change list should have description\nre-edit (y/n)?", ["&yes", "&no"], "y") != "n":
continue
break
return ""
# For use by submit, etc. (NOT by change)
# Get change list number or list of files from command line.
# If files are given, make a new change list.
def CommandLineCL(ui, repo, pats, opts):
if len(pats) > 0 and GoodCLName(pats[0]):
if len(pats) != 1:
return None, "cannot specify change number and file names"
if opts.get('message'):
return None, "cannot use -m with existing CL"
cl, err = LoadCL(ui, repo, pats[0], web=True)
if err != "":
return None, err
else:
cl = CL("new")
cl.local = True
cl.files = Sub(ChangedFiles(ui, repo, pats, opts), TakenFiles(ui, repo))
if not cl.files:
return None, "no files changed"
if opts.get('reviewer'):
cl.reviewer = Add(cl.reviewer, SplitCommaSpace(opts.get('reviewer')))
if opts.get('cc'):
cl.cc = Add(cl.cc, SplitCommaSpace(opts.get('cc')))
if cl.name == "new":
if opts.get('message'):
cl.desc = opts.get('message')
else:
err = EditCL(ui, repo, cl)
if err != '':
return None, err
return cl, ""
# reposetup replaces cmdutil.match with this wrapper,
# which expands the syntax @clnumber to mean the files
# in that CL.
original_match = None
def ReplacementForCmdutilMatch(repo, pats=[], opts={}, globbed=False, default='relpath'):
taken = []
files = []
for p in pats:
if p.startswith('@'):
taken.append(p)
clname = p[1:]
if not GoodCLName(clname):
raise util.Abort("invalid CL name " + clname)
cl, err = LoadCL(repo.ui, repo, clname, web=False)
if err != '':
raise util.Abort("loading CL " + clname + ": " + err)
files = Add(files, cl.files)
pats = Sub(pats, taken) + ['path:'+f for f in files]
return original_match(repo, pats=pats, opts=opts, globbed=globbed, default=default)
def RelativePath(path, cwd):
n = len(cwd)
if path.startswith(cwd) and path[n] == '/':
return path[n+1:]
return path
# Check that gofmt run on the list of files does not change them
def CheckGofmt(ui, repo, files, just_warn=False):
files = [f for f in files if f.startswith('src/') and f.endswith('.go')]
if not files:
return
cwd = os.getcwd()
files = [RelativePath(repo.root + '/' + f, cwd) for f in files]
try:
cmd = subprocess.Popen(["gofmt", "-l"] + files, shell=False, stdin=subprocess.PIPE, stdout=subprocess.PIPE, stderr=subprocess.PIPE, close_fds=True)
cmd.stdin.close()
except:
raise util.Abort("gofmt: " + ExceptionDetail())
data = cmd.stdout.read()
errors = cmd.stderr.read()
cmd.wait()
if len(errors) > 0:
ui.warn("gofmt errors:\n" + errors.rstrip() + "\n")
return
if len(data) > 0:
msg = "gofmt needs to format these files (run hg gofmt):\n" + Indent(data, "\t").rstrip()
if just_warn:
ui.warn("warning: " + msg + "\n")
else:
raise util.Abort(msg)
return
#######################################################################
# Mercurial commands
server = "codereview.appspot.com"
server_url_base = None
# every command must take a ui and and repo as arguments.
# opts is a dict where you can find other command line flags
#
# Other parameters are taken in order from items on the command line that
# don't start with a dash. If no default value is given in the parameter list,
# they are required.
#
def change(ui, repo, *pats, **opts):
"""create or edit a change list
Create or edit a change list.
A change list is a group of files to be reviewed and submitted together,
plus a textual description of the change.
Change lists are referred to by simple alphanumeric names.
Changes must be reviewed before they can be submitted.
In the absence of options, the change command opens the
change list for editing in the default editor.
Deleting a change with the -d or -D flag does not affect
the contents of the files listed in that change. To revert
the files listed in a change, use
hg revert @123456
before running hg change -d 123456.
"""
dirty = {}
if len(pats) > 0 and GoodCLName(pats[0]):
name = pats[0]
if len(pats) != 1:
return "cannot specify CL name and file patterns"
pats = pats[1:]
cl, err = LoadCL(ui, repo, name, web=True)
if err != '':
return err
if not cl.local and (opts["stdin"] or not opts["stdout"]):
return "cannot change non-local CL " + name
else:
name = "new"
cl = CL("new")
dirty[cl] = True
files = ChangedFiles(ui, repo, pats, opts)
taken = TakenFiles(ui, repo)
files = Sub(files, taken)
if opts["delete"] or opts["deletelocal"]:
if opts["delete"] and opts["deletelocal"]:
return "cannot use -d and -D together"
flag = "-d"
if opts["deletelocal"]:
flag = "-D"
if name == "new":
return "cannot use "+flag+" with file patterns"
if opts["stdin"] or opts["stdout"]:
return "cannot use "+flag+" with -i or -o"
if not cl.local:
return "cannot change non-local CL " + name
if opts["delete"]:
if cl.original_author:
return "original author must delete CL; hg change -D will remove locally"
PostMessage(cl.name, "*** Abandoned ***", send_mail="checked")
EditDesc(cl.name, closed="checked")
cl.Delete(ui, repo)
return
if opts["stdin"]:
s = sys.stdin.read()
clx, line, err = ParseCL(s, name)
if err != '':
return "error parsing change list: line %d: %s" % (line, err)
if clx.desc is not None:
cl.desc = clx.desc;
dirty[cl] = True
if clx.reviewer is not None:
cl.reviewer = clx.reviewer
dirty[cl] = True
if clx.cc is not None:
cl.cc = clx.cc
dirty[cl] = True
if clx.files is not None:
cl.files = clx.files
dirty[cl] = True
if not opts["stdin"] and not opts["stdout"]:
if name == "new":
cl.files = files
err = EditCL(ui, repo, cl)
if err != "":
return err
dirty[cl] = True
for d, _ in dirty.items():
d.Flush(ui, repo)
if opts["stdout"]:
ui.write(cl.EditorText())
elif name == "new":
if ui.quiet:
ui.write(cl.name)
else:
ui.write("CL created: " + cl.url + "\n")
return
def code_login(ui, repo, **opts):
"""log in to code review server
Logs in to the code review server, saving a cookie in
a file in your home directory.
"""
MySend(None)
def clpatch(ui, repo, clname, **opts):
"""import a patch from the code review server
Imports a patch from the code review server into the local client.
If the local client has already modified any of the files that the
patch modifies, this command will refuse to apply the patch.
Submitting an imported patch will keep the original author's
name as the Author: line but add your own name to a Committer: line.
"""
cl, patch, err = DownloadCL(ui, repo, clname)
argv = ["hgpatch"]
if opts["no_incoming"]:
argv += ["--checksync=false"]
if err != "":
return err
try:
cmd = subprocess.Popen(argv, shell=False, stdin=subprocess.PIPE, stdout=subprocess.PIPE, stderr=None, close_fds=True)
except:
return "hgpatch: " + ExceptionDetail()
if os.fork() == 0:
cmd.stdin.write(patch)
os._exit(0)
cmd.stdin.close()
out = cmd.stdout.read()
if cmd.wait() != 0:
return "hgpatch failed"
cl.local = True
cl.files = out.strip().split()
files = ChangedFiles(ui, repo, [], opts)
extra = Sub(cl.files, files)
if extra:
ui.warn("warning: these files were listed in the patch but not changed:\n\t" + "\n\t".join(extra) + "\n")
cl.Flush(ui, repo)
ui.write(cl.PendingText() + "\n")
def download(ui, repo, clname, **opts):
"""download a change from the code review server
Download prints a description of the given change list
followed by its diff, downloaded from the code review server.
"""
cl, patch, err = DownloadCL(ui, repo, clname)
if err != "":
return err
ui.write(cl.EditorText() + "\n")
ui.write(patch + "\n")
return
def file(ui, repo, clname, pat, *pats, **opts):
"""assign files to or remove files from a change list
Assign files to or (with -d) remove files from a change list.
The -d option only removes files from the change list.
It does not edit them or remove them from the repository.
"""
pats = tuple([pat] + list(pats))
if not GoodCLName(clname):
return "invalid CL name " + clname
dirty = {}
cl, err = LoadCL(ui, repo, clname, web=False)
if err != '':
return err
if not cl.local:
return "cannot change non-local CL " + clname
files = ChangedFiles(ui, repo, pats, opts)
if opts["delete"]:
oldfiles = Intersect(files, cl.files)
if oldfiles:
if not ui.quiet:
ui.status("# Removing files from CL. To undo:\n")
ui.status("# cd %s\n" % (repo.root))
for f in oldfiles:
ui.status("# hg file %s %s\n" % (cl.name, f))
cl.files = Sub(cl.files, oldfiles)
cl.Flush(ui, repo)
else:
ui.status("no such files in CL")
return
if not files:
return "no such modified files"
files = Sub(files, cl.files)
taken = Taken(ui, repo)
warned = False
for f in files:
if f in taken:
if not warned and not ui.quiet:
ui.status("# Taking files from other CLs. To undo:\n")
ui.status("# cd %s\n" % (repo.root))
warned = True
ocl = taken[f]
if not ui.quiet:
ui.status("# hg file %s %s\n" % (ocl.name, f))
if ocl not in dirty:
ocl.files = Sub(ocl.files, files)
dirty[ocl] = True
cl.files = Add(cl.files, files)
dirty[cl] = True
for d, _ in dirty.items():
d.Flush(ui, repo)
return
def gofmt(ui, repo, *pats, **opts):
"""apply gofmt to modified files
Applies gofmt to the modified files in the repository that match
the given patterns.
"""
files = ChangedExistingFiles(ui, repo, pats, opts)
files = [f for f in files if f.endswith(".go")]
if not files:
return "no modified go files"
cwd = os.getcwd()
files = [RelativePath(repo.root + '/' + f, cwd) for f in files]
try:
cmd = ["gofmt", "-l"]
if not opts["list"]:
cmd += ["-w"]
if os.spawnvp(os.P_WAIT, "gofmt", cmd + files) != 0:
raise util.Abort("gofmt did not exit cleanly")
except error.Abort, e:
raise
except:
raise util.Abort("gofmt: " + ExceptionDetail())
return
def mail(ui, repo, *pats, **opts):
"""mail a change for review
Uploads a patch to the code review server and then sends mail
to the reviewer and CC list asking for a review.
"""
cl, err = CommandLineCL(ui, repo, pats, opts)
if err != "":
return err
cl.Upload(ui, repo, gofmt_just_warn=True)
if not cl.reviewer:
return "no reviewers listed in CL"
pmsg = "Hello " + JoinComma(cl.reviewer)
if cl.cc:
pmsg += " (cc: %s)" % (', '.join(cl.cc),)
pmsg += ",\n"
pmsg += "\n"
pmsg += "I'd like you to review the following change.\n"
PostMessage(cl.name, pmsg, send_mail="checked", subject=cl.Subject())
def nocommit(ui, repo, *pats, **opts):
"""(disabled when using this extension)"""
return "The codereview extension is enabled; do not use commit."
def pending(ui, repo, *pats, **opts):
"""show pending changes
Lists pending changes followed by a list of unassigned but modified files.
"""
m = LoadAllCL(ui, repo, web=True)
names = m.keys()
names.sort()
for name in names:
cl = m[name]
ui.write(cl.PendingText() + "\n")
files = DefaultFiles(ui, repo, [], opts)
if len(files) > 0:
s = "Changed files not in any CL:\n"
for f in files:
s += "\t" + f + "\n"
ui.write(s)
def reposetup(ui, repo):
global original_match
if original_match is None:
original_match = cmdutil.match
cmdutil.match = ReplacementForCmdutilMatch
RietveldSetup(ui, repo)
def CheckContributor(ui, repo, user=None):
if not user:
user = ui.config("ui", "username")
if not user:
raise util.Abort("[ui] username is not configured in .hgrc")
_, userline = FindContributor(ui, repo, user, warn=False)
if not userline:
raise util.Abort("cannot find %s in CONTRIBUTORS" % (user,))
return userline
def FindContributor(ui, repo, user, warn=True):
try:
f = open(repo.root + '/CONTRIBUTORS', 'r')
except:
raise util.Abort("cannot open %s: %s" % (repo.root+'/CONTRIBUTORS', ExceptionDetail()))
for line in f.readlines():
line = line.rstrip()
if line.startswith('#'):
continue
match = re.match(r"(.*) <(.*)>", line)
if not match:
continue
if line == user or match.group(2) == user:
return match.group(2), line
if warn:
ui.warn("warning: cannot find %s in CONTRIBUTORS\n" % (user,))
return None, None
def submit(ui, repo, *pats, **opts):
"""submit change to remote repository
Submits change to remote repository.
Bails out if the local repository is not in sync with the remote one.
"""
repo.ui.quiet = True
if not opts["no_incoming"] and Incoming(ui, repo, opts):
return "local repository out of date; must sync before submit"
cl, err = CommandLineCL(ui, repo, pats, opts)
if err != "":
return err
user = None
if cl.original_author:
user = cl.original_author
userline = CheckContributor(ui, repo, user)
about = ""
if cl.reviewer:
about += "R=" + JoinComma([CutDomain(s) for s in cl.reviewer]) + "\n"
if opts.get('tbr'):
tbr = SplitCommaSpace(opts.get('tbr'))
cl.reviewer = Add(cl.reviewer, tbr)
about += "TBR=" + JoinComma([CutDomain(s) for s in tbr]) + "\n"
if cl.cc:
about += "CC=" + JoinComma([CutDomain(s) for s in cl.cc]) + "\n"
if not cl.reviewer:
return "no reviewers listed in CL"
if not cl.local:
return "cannot submit non-local CL"
# upload, to sync current patch and also get change number if CL is new.
if not cl.original_author:
cl.Upload(ui, repo, gofmt_just_warn=True)
# check gofmt for real; allowed upload to warn in order to save CL.
cl.Flush(ui, repo)
CheckGofmt(ui, repo, cl.files)
about += "%s%s\n" % (server_url_base, cl.name)
if cl.original_author:
about += "\nCommitter: " + CheckContributor(ui, repo, None) + "\n"
# submit changes locally
date = opts.get('date')
if date:
opts['date'] = util.parsedate(date)
opts['message'] = cl.desc.rstrip() + "\n\n" + about
if opts['dryrun']:
print "NOT SUBMITTING:"
print "User: ", userline
print "Message:"
print Indent(opts['message'], "\t")
print "Files:"
print Indent('\n'.join(cl.files), "\t")
return "dry run; not submitted"
m = match.exact(repo.root, repo.getcwd(), cl.files)
node = repo.commit(opts['message'], userline, opts.get('date'), m)
if not node:
return "nothing changed"
log = repo.changelog
rev = log.rev(node)
parents = log.parentrevs(rev)
if (rev-1 not in parents and
(parents == (nullrev, nullrev) or
len(log.heads(log.node(parents[0]))) > 1 and
(parents[1] == nullrev or len(log.heads(log.node(parents[1]))) > 1))):
repo.rollback()
return "local repository out of date (created new head); must sync before submit"
# push changes to remote.
# if it works, we're committed.
# if not, roll back
other = getremote(ui, repo, opts)
r = repo.push(other, False, None)
if r == 0:
repo.rollback()
return "local repository out of date; must sync before submit"
# we're committed. upload final patch, close review, add commit message
changeURL = short(node)
url = other.url()
m = re.match("^https?://([^@/]+@)?([^.]+)\.googlecode\.com/hg/", url)
if m:
changeURL = "http://code.google.com/p/%s/source/detail?r=%s" % (m.group(2), changeURL)
else:
print >>sys.stderr, "URL: ", url
pmsg = "*** Submitted as " + changeURL + " ***\n\n" + opts['message']
PostMessage(cl.name, pmsg, send_mail="checked")
if not cl.original_author:
EditDesc(cl.name, closed="checked")
cl.Delete(ui, repo)
def sync(ui, repo, **opts):
"""synchronize with remote repository
Incorporates recent changes from the remote repository
into the local repository.
"""
if not opts["local"]:
ui.status = sync_note
ui.note = sync_note
other = getremote(ui, repo, opts)
modheads = repo.pull(other)
err = commands.postincoming(ui, repo, modheads, True, "tip")
if err:
return err
sync_changes(ui, repo)
def sync_note(msg):
# we run sync (pull -u) in verbose mode to get the
# list of files being updated, but that drags along
# a bunch of messages we don't care about.
# omit them.
if msg == 'resolving manifests\n':
return
if msg == 'searching for changes\n':
return
if msg == "couldn't find merge tool hgmerge\n":
return
sys.stdout.write(msg)
def sync_changes(ui, repo):
# Look through recent change log descriptions to find
# potential references to http://.*/our-CL-number.
# Double-check them by looking at the Rietveld log.
get = util.cachefunc(lambda r: repo[r].changeset())
changeiter, matchfn = cmdutil.walkchangerevs(ui, repo, [], get, {'rev': None})
n = 0
for st, rev, fns in changeiter:
if st != 'iter':
continue
n += 1
if n > 100:
break
desc = repo[rev].description().strip()
for clname in re.findall('(?m)^http://(?:[^\n]+)/([0-9]+)$', desc):
if IsLocalCL(ui, repo, clname) and IsRietveldSubmitted(ui, clname, repo[rev].hex()):
ui.warn("CL %s submitted as %s; closing\n" % (clname, repo[rev]))
cl, err = LoadCL(ui, repo, clname, web=False)
if err != "":
ui.warn("loading CL %s: %s\n" % (clname, err))
continue
EditDesc(cl.name, closed="checked")
cl.Delete(ui, repo)
# Remove files that are not modified from the CLs in which they appear.
all = LoadAllCL(ui, repo, web=False)
changed = ChangedFiles(ui, repo, [], {})
for _, cl in all.items():
extra = Sub(cl.files, changed)
if extra:
ui.warn("Removing unmodified files from CL %s:\n" % (cl.name,))
for f in extra:
ui.warn("\t%s\n" % (f,))
cl.files = Sub(cl.files, extra)
cl.Flush(ui, repo)
if not cl.files:
ui.warn("CL %s has no files; suggest hg change -d %s\n" % (cl.name, cl.name))
return
def uisetup(ui):
if "^commit|ci" in commands.table:
commands.table["^commit|ci"] = (nocommit, [], "")
def upload(ui, repo, name, **opts):
"""upload diffs to the code review server
Uploads the current modifications for a given change to the server.
"""
repo.ui.quiet = True
cl, err = LoadCL(ui, repo, name, web=True)
if err != "":
return err
if not cl.local:
return "cannot upload non-local change"
cl.Upload(ui, repo)
print "%s%s\n" % (server_url_base, cl.name)
return
review_opts = [
('r', 'reviewer', '', 'add reviewer'),
('', 'cc', '', 'add cc'),
('', 'tbr', '', 'add future reviewer'),
('m', 'message', '', 'change description (for new change)'),
]
cmdtable = {
# The ^ means to show this command in the help text that
# is printed when running hg with no arguments.
"^change": (
change,
[
('d', 'delete', None, 'delete existing change list'),
('D', 'deletelocal', None, 'delete locally, but do not change CL on server'),
('i', 'stdin', None, 'read change list from standard input'),
('o', 'stdout', None, 'print change list to standard output'),
],
"[-d | -D] [-i] [-o] change# or FILE ..."
),
"^clpatch": (
clpatch,
[
('', 'no_incoming', None, 'disable check for incoming changes'),
],
"change#"
),
# Would prefer to call this codereview-login, but then
# hg help codereview prints the help for this command
# instead of the help for the extension.
"code-login": (
code_login,
[],
"",
),
"commit|ci": (
nocommit,
[],
"",
),
"^download": (
download,
[],
"change#"
),
"^file": (
file,
[
('d', 'delete', None, 'delete files from change list (but not repository)'),
],
"[-d] change# FILE ..."
),
"^gofmt": (
gofmt,
[
('l', 'list', None, 'list files that would change, but do not edit them'),
],
"FILE ..."
),
"^pending|p": (
pending,
[],
"[FILE ...]"
),
"^mail": (
mail,
review_opts + [
] + commands.walkopts,
"[-r reviewer] [--cc cc] [change# | file ...]"
),
"^submit": (
submit,
review_opts + [
('', 'no_incoming', None, 'disable initial incoming check (for testing)'),
('n', 'dryrun', None, 'make change only locally (for testing)'),
] + commands.walkopts + commands.commitopts + commands.commitopts2,
"[-r reviewer] [--cc cc] [change# | file ...]"
),
"^sync": (
sync,
[
('', 'local', None, 'do not pull changes from remote repository')
],
"[--local]",
),
"^upload": (
upload,
[],
"change#"
),
}
#######################################################################
# Wrappers around upload.py for interacting with Rietveld
emptydiff = """Index: ~rietveld~placeholder~
===================================================================
diff --git a/~rietveld~placeholder~ b/~rietveld~placeholder~
new file mode 100644
"""
# HTML form parser
class FormParser(HTMLParser):
def __init__(self):
self.map = {}
self.curtag = None
self.curdata = None
HTMLParser.__init__(self)
def handle_starttag(self, tag, attrs):
if tag == "input":
key = None
value = ''
for a in attrs:
if a[0] == 'name':
key = a[1]
if a[0] == 'value':
value = a[1]
if key is not None:
self.map[key] = value
if tag == "textarea":
key = None
for a in attrs:
if a[0] == 'name':
key = a[1]
if key is not None:
self.curtag = key
self.curdata = ''
def handle_endtag(self, tag):
if tag == "textarea" and self.curtag is not None:
self.map[self.curtag] = self.curdata
self.curtag = None
self.curdata = None
def handle_charref(self, name):
self.handle_data(unichr(int(name)))
def handle_entityref(self, name):
import htmlentitydefs
if name in htmlentitydefs.entitydefs:
self.handle_data(htmlentitydefs.entitydefs[name])
else:
self.handle_data("&" + name + ";")
def handle_data(self, data):
if self.curdata is not None:
self.curdata += data
# XML parser
def XMLGet(ui, path):
try:
data = MySend(path, force_auth=False);
except:
ui.warn("XMLGet %s: %s\n" % (path, ExceptionDetail()))
return None
return ET.XML(data)
def IsRietveldSubmitted(ui, clname, hex):
feed = XMLGet(ui, "/rss/issue/" + clname)
if feed is None:
return False
for sum in feed.findall("{http://www.w3.org/2005/Atom}entry/{http://www.w3.org/2005/Atom}summary"):
text = sum.findtext("", None).strip()
m = re.match('\*\*\* Submitted as [^*]*?([0-9a-f]+) \*\*\*', text)
if m is not None and len(m.group(1)) >= 8 and hex.startswith(m.group(1)):
return True
return False
def DownloadCL(ui, repo, clname):
cl, err = LoadCL(ui, repo, clname)
if err != "":
return None, None, "error loading CL %s: %s" % (clname, ExceptionDetail())
# Grab RSS feed to learn about CL
feed = XMLGet(ui, "/rss/issue/" + clname)
if feed is None:
return None, None, "cannot download CL"
# Find most recent diff
diff = None
prefix = 'http://' + server + '/'
for link in feed.findall("{http://www.w3.org/2005/Atom}entry/{http://www.w3.org/2005/Atom}link"):
if link.get('rel') != 'alternate':
continue
text = link.get('href')
if not text.startswith(prefix) or not text.endswith('.diff'):
continue
diff = text[len(prefix)-1:]
if diff is None:
return None, None, "CL has no diff"
diffdata = MySend(diff, force_auth=False)
# Find author - first entry will be author who created CL.
nick = None
for author in feed.findall("{http://www.w3.org/2005/Atom}entry/{http://www.w3.org/2005/Atom}author/{http://www.w3.org/2005/Atom}name"):
nick = author.findtext("", None).strip()
break
if not nick:
return None, None, "CL has no author"
# The author is just a nickname: get the real email address.
try:
data = MySend("/user_popup/" + nick, force_auth=False)
except:
return None, None, "error looking up %s: %s" % (nick, ExceptionDetail())
match = re.match(r"<b>(.*) \((.*)\)</b>", data)
if not match or match.group(2) != nick:
return None, None, "error looking up %s: cannot parse result" % (nick,)
email = match.group(1)
# Temporary hack until we move to the public code review server.
email1, _ = FindContributor(ui, repo, email, warn=False)
if email1 == "":
email = re.sub("@google.com$", "@golang.org", email)
# Print warning if email is not in CONTRIBUTORS file.
FindContributor(ui, repo, email)
cl.original_author = email
return cl, diffdata, ""
# Like upload.py Send but only authenticates when the
# redirect is to www.google.com/accounts. This keeps
# unnecessary redirects from happening during testing.
def MySend(request_path, payload=None,
content_type="application/octet-stream",
timeout=None, force_auth=True,
**kwargs):
"""Sends an RPC and returns the response.
Args:
request_path: The path to send the request to, eg /api/appversion/create.
payload: The body of the request, or None to send an empty request.
content_type: The Content-Type header to use.
timeout: timeout in seconds; default None i.e. no timeout.
(Note: for large requests on OS X, the timeout doesn't work right.)
kwargs: Any keyword arguments are converted into query string parameters.
Returns:
The response body, as a string.
"""
# TODO: Don't require authentication. Let the server say
# whether it is necessary.
global rpc
if rpc == None:
rpc = GetRpcServer(upload_options)
self = rpc
if not self.authenticated and force_auth:
self._Authenticate()
if request_path is None:
return
old_timeout = socket.getdefaulttimeout()
socket.setdefaulttimeout(timeout)
try:
tries = 0
while True:
tries += 1
args = dict(kwargs)
url = "http://%s%s" % (self.host, request_path)
if args:
url += "?" + urllib.urlencode(args)
req = self._CreateRequest(url=url, data=payload)
req.add_header("Content-Type", content_type)
try:
f = self.opener.open(req)
response = f.read()
f.close()
return response
except urllib2.HTTPError, e:
if tries > 3:
raise
elif e.code == 401:
self._Authenticate()
elif e.code == 302:
loc = e.info()["location"]
if not loc.startswith('https://www.google.com/a') or loc.find('/ServiceLogin') < 0:
return ''
self._Authenticate()
else:
raise
finally:
socket.setdefaulttimeout(old_timeout)
def GetForm(url):
f = FormParser()
f.feed(MySend(url))
f.close()
for k,v in f.map.items():
f.map[k] = v.replace("\r\n", "\n");
return f.map
# Fetch the settings for the CL, like reviewer and CC list, by
# scraping the Rietveld editing forms.
def GetSettings(issue):
# The /issue/edit page has everything but only the
# CL owner is allowed to fetch it (and submit it).
f = None
try:
f = GetForm("/" + issue + "/edit")
except:
pass
if not f or 'reviewers' not in f:
# Maybe we're not the CL owner. Fall back to the
# /publish page, which has the reviewer and CC lists,
# and then fetch the description separately.
f = GetForm("/" + issue + "/publish")
f['description'] = MySend("/"+issue+"/description", force_auth=False)
return f
def CreateIssue(subject, desc):
form_fields = [
("content_upload", "1"),
# ("user", upload_options.email),
("reviewers", ''),
("cc", ''),
("description", desc),
("base_hashes", ""),
("subject", subject),
]
uploaded_diff_file = [
("data", "data.diff", emptydiff),
]
ctype, body = EncodeMultipartFormData(form_fields, uploaded_diff_file)
response = MySend("/upload", body, content_type=ctype)
if response != "":
print >>sys.stderr, "Error creating issue:\n" + response
sys.exit(2)
def EditDesc(issue, subject=None, desc=None, reviewers=None, cc=None, closed=None):
form_fields = GetForm("/" + issue + "/edit")
if subject is not None:
form_fields['subject'] = subject
if desc is not None:
form_fields['description'] = desc
if reviewers is not None:
form_fields['reviewers'] = reviewers
if cc is not None:
form_fields['cc'] = cc
if closed is not None:
form_fields['closed'] = closed
ctype, body = EncodeMultipartFormData(form_fields.items(), [])
response = MySend("/" + issue + "/edit", body, content_type=ctype)
if response != "":
print >>sys.stderr, "Error editing description:\n" + "Sent form: \n", form_fields, "\n", response
sys.exit(2)
def PostMessage1(issue, message, reviewers=None, cc=None, send_mail=None, subject=None):
form_fields = GetForm("/" + issue + "/publish")
if reviewers is not None:
form_fields['reviewers'] = reviewers
if cc is not None:
form_fields['cc'] = cc
if send_mail is not None:
form_fields['send_mail'] = send_mail
if subject is not None:
form_fields['subject'] = subject
form_fields['message'] = message
form_fields['message_only'] = '1'
ctype, body = EncodeMultipartFormData(form_fields.items(), [])
response = MySend("/" + issue + "/publish", body, content_type=ctype)
if response != "":
print response
sys.exit(2)
def PostMessage(issue, message, reviewers=None, cc=None, send_mail=None, subject=None):
# When Rietveld is busy, it seems to throw off a lot of HTTP Error 500: Internal Server Error.
# Rather than abort, sleep and try again.
# Even if the second time fails, let the overall hg command keep going.
try:
PostMessage1(issue, message, reviewers, cc, send_mail, subject)
return
except:
pass
ui.warn("error posting to "+server+" log; sleep 2 and try again.")
os.sleep(2)
try:
PostMessage1(issue, message, reviewers, cc, send_mail, subject)
return
except:
pass
ui.warn("error posting to "+server+" twice; log not updated.")
class opt(object):
pass
def RietveldSetup(ui, repo):
global upload_options, rpc, server, server_url_base, force_google_account, verbosity
# TODO(rsc): If the repository config has no codereview section,
# do not enable the extension. This allows users to
# put the extension in their global .hgrc but only
# enable it for some repositories.
# if not ui.has_section("codereview"):
# cmdtable = {}
# return
if not ui.verbose:
verbosity = 0
# Config options.
x = ui.config("codereview", "server")
if x is not None:
server = x
# TODO(rsc): Take from ui.username?
email = None
x = ui.config("codereview", "email")
if x is not None:
email = x
cc = None
x = ui.config("codereview", "cc")
if x is not None:
cc = x
server_url_base = "http://" + server + "/"
testing = ui.config("codereview", "testing")
force_google_account = ui.configbool("codereview", "force_google_account", False)
upload_options = opt()
upload_options.email = email
upload_options.host = None
upload_options.verbose = 0
upload_options.description = None
upload_options.description_file = None
upload_options.reviewers = None
upload_options.cc = cc
upload_options.message = None
upload_options.issue = None
upload_options.download_base = False
upload_options.revision = None
upload_options.send_mail = False
upload_options.vcs = None
upload_options.server = server
upload_options.save_cookies = True
if testing:
upload_options.save_cookies = False
upload_options.email = "test@example.com"
rpc = None
#######################################################################
# We keep a full copy of upload.py here to avoid import path hell.
# It would be nice if hg added the hg repository root
# to the default PYTHONPATH.
# Edit .+2,<hget http://codereview.appspot.com/static/upload.py
#!/usr/bin/env python
#
# Copyright 2007 Google Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
"""Tool for uploading diffs from a version control system to the codereview app.
Usage summary: upload.py [options] [-- diff_options]
Diff options are passed to the diff command of the underlying system.
Supported version control systems:
Git
Mercurial
Subversion
It is important for Git/Mercurial users to specify a tree/node/branch to diff
against by using the '--rev' option.
"""
# This code is derived from appcfg.py in the App Engine SDK (open source),
# and from ASPN recipe #146306.
import cookielib
import getpass
import logging
import mimetypes
import optparse
import os
import re
import socket
import subprocess
import sys
import urllib
import urllib2
import urlparse
# The md5 module was deprecated in Python 2.5.
try:
from hashlib import md5
except ImportError:
from md5 import md5
try:
import readline
except ImportError:
pass
# The logging verbosity:
# 0: Errors only.
# 1: Status messages.
# 2: Info logs.
# 3: Debug logs.
verbosity = 1
# Max size of patch or base file.
MAX_UPLOAD_SIZE = 900 * 1024
# Constants for version control names. Used by GuessVCSName.
VCS_GIT = "Git"
VCS_MERCURIAL = "Mercurial"
VCS_SUBVERSION = "Subversion"
VCS_UNKNOWN = "Unknown"
# whitelist for non-binary filetypes which do not start with "text/"
# .mm (Objective-C) shows up as application/x-freemind on my Linux box.
TEXT_MIMETYPES = ['application/javascript', 'application/x-javascript',
'application/x-freemind']
VCS_ABBREVIATIONS = {
VCS_MERCURIAL.lower(): VCS_MERCURIAL,
"hg": VCS_MERCURIAL,
VCS_SUBVERSION.lower(): VCS_SUBVERSION,
"svn": VCS_SUBVERSION,
VCS_GIT.lower(): VCS_GIT,
}
def GetEmail(prompt):
"""Prompts the user for their email address and returns it.
The last used email address is saved to a file and offered up as a suggestion
to the user. If the user presses enter without typing in anything the last
used email address is used. If the user enters a new address, it is saved
for next time we prompt.
"""
last_email_file_name = os.path.expanduser("~/.last_codereview_email_address")
last_email = ""
if os.path.exists(last_email_file_name):
try:
last_email_file = open(last_email_file_name, "r")
last_email = last_email_file.readline().strip("\n")
last_email_file.close()
prompt += " [%s]" % last_email
except IOError, e:
pass
email = raw_input(prompt + ": ").strip()
if email:
try:
last_email_file = open(last_email_file_name, "w")
last_email_file.write(email)
last_email_file.close()
except IOError, e:
pass
else:
email = last_email
return email
def StatusUpdate(msg):
"""Print a status message to stdout.
If 'verbosity' is greater than 0, print the message.
Args:
msg: The string to print.
"""
if verbosity > 0:
print msg
def ErrorExit(msg):
"""Print an error message to stderr and exit."""
print >>sys.stderr, msg
sys.exit(1)
class ClientLoginError(urllib2.HTTPError):
"""Raised to indicate there was an error authenticating with ClientLogin."""
def __init__(self, url, code, msg, headers, args):
urllib2.HTTPError.__init__(self, url, code, msg, headers, None)
self.args = args
self.reason = args["Error"]
class AbstractRpcServer(object):
"""Provides a common interface for a simple RPC server."""
def __init__(self, host, auth_function, host_override=None, extra_headers={},
save_cookies=False):
"""Creates a new HttpRpcServer.
Args:
host: The host to send requests to.
auth_function: A function that takes no arguments and returns an
(email, password) tuple when called. Will be called if authentication
is required.
host_override: The host header to send to the server (defaults to host).
extra_headers: A dict of extra headers to append to every request.
save_cookies: If True, save the authentication cookies to local disk.
If False, use an in-memory cookiejar instead. Subclasses must
implement this functionality. Defaults to False.
"""
self.host = host
self.host_override = host_override
self.auth_function = auth_function
self.authenticated = False
self.extra_headers = extra_headers
self.save_cookies = save_cookies
self.opener = self._GetOpener()
if self.host_override:
logging.info("Server: %s; Host: %s", self.host, self.host_override)
else:
logging.info("Server: %s", self.host)
def _GetOpener(self):
"""Returns an OpenerDirector for making HTTP requests.
Returns:
A urllib2.OpenerDirector object.
"""
raise NotImplementedError()
def _CreateRequest(self, url, data=None):
"""Creates a new urllib request."""
logging.debug("Creating request for: '%s' with payload:\n%s", url, data)
req = urllib2.Request(url, data=data)
if self.host_override:
req.add_header("Host", self.host_override)
for key, value in self.extra_headers.iteritems():
req.add_header(key, value)
return req
def _GetAuthToken(self, email, password):
"""Uses ClientLogin to authenticate the user, returning an auth token.
Args:
email: The user's email address
password: The user's password
Raises:
ClientLoginError: If there was an error authenticating with ClientLogin.
HTTPError: If there was some other form of HTTP error.
Returns:
The authentication token returned by ClientLogin.
"""
account_type = "GOOGLE"
if self.host.endswith(".google.com") and not force_google_account:
# Needed for use inside Google.
account_type = "HOSTED"
req = self._CreateRequest(
url="https://www.google.com/accounts/ClientLogin",
data=urllib.urlencode({
"Email": email,
"Passwd": password,
"service": "ah",
"source": "rietveld-codereview-upload",
"accountType": account_type,
}),
)
try:
response = self.opener.open(req)
response_body = response.read()
response_dict = dict(x.split("=")
for x in response_body.split("\n") if x)
return response_dict["Auth"]
except urllib2.HTTPError, e:
if e.code == 403:
body = e.read()
response_dict = dict(x.split("=", 1) for x in body.split("\n") if x)
raise ClientLoginError(req.get_full_url(), e.code, e.msg,
e.headers, response_dict)
else:
raise
def _GetAuthCookie(self, auth_token):
"""Fetches authentication cookies for an authentication token.
Args:
auth_token: The authentication token returned by ClientLogin.
Raises:
HTTPError: If there was an error fetching the authentication cookies.
"""
# This is a dummy value to allow us to identify when we're successful.
continue_location = "http://localhost/"
args = {"continue": continue_location, "auth": auth_token}
req = self._CreateRequest("http://%s/_ah/login?%s" %
(self.host, urllib.urlencode(args)))
try:
response = self.opener.open(req)
except urllib2.HTTPError, e:
response = e
if (response.code != 302 or
response.info()["location"] != continue_location):
raise urllib2.HTTPError(req.get_full_url(), response.code, response.msg,
response.headers, response.fp)
self.authenticated = True
def _Authenticate(self):
"""Authenticates the user.
The authentication process works as follows:
1) We get a username and password from the user
2) We use ClientLogin to obtain an AUTH token for the user
(see http://code.google.com/apis/accounts/AuthForInstalledApps.html).
3) We pass the auth token to /_ah/login on the server to obtain an
authentication cookie. If login was successful, it tries to redirect
us to the URL we provided.
If we attempt to access the upload API without first obtaining an
authentication cookie, it returns a 401 response (or a 302) and
directs us to authenticate ourselves with ClientLogin.
"""
for i in range(3):
credentials = self.auth_function()
try:
auth_token = self._GetAuthToken(credentials[0], credentials[1])
except ClientLoginError, e:
if e.reason == "BadAuthentication":
print >>sys.stderr, "Invalid username or password."
continue
if e.reason == "CaptchaRequired":
print >>sys.stderr, (
"Please go to\n"
"https://www.google.com/accounts/DisplayUnlockCaptcha\n"
"and verify you are a human. Then try again.")
break
if e.reason == "NotVerified":
print >>sys.stderr, "Account not verified."
break
if e.reason == "TermsNotAgreed":
print >>sys.stderr, "User has not agreed to TOS."
break
if e.reason == "AccountDeleted":
print >>sys.stderr, "The user account has been deleted."
break
if e.reason == "AccountDisabled":
print >>sys.stderr, "The user account has been disabled."
break
if e.reason == "ServiceDisabled":
print >>sys.stderr, ("The user's access to the service has been "
"disabled.")
break
if e.reason == "ServiceUnavailable":
print >>sys.stderr, "The service is not available; try again later."
break
raise
self._GetAuthCookie(auth_token)
return
def Send(self, request_path, payload=None,
content_type="application/octet-stream",
timeout=None,
**kwargs):
"""Sends an RPC and returns the response.
Args:
request_path: The path to send the request to, eg /api/appversion/create.
payload: The body of the request, or None to send an empty request.
content_type: The Content-Type header to use.
timeout: timeout in seconds; default None i.e. no timeout.
(Note: for large requests on OS X, the timeout doesn't work right.)
kwargs: Any keyword arguments are converted into query string parameters.
Returns:
The response body, as a string.
"""
# TODO: Don't require authentication. Let the server say
# whether it is necessary.
if not self.authenticated:
self._Authenticate()
old_timeout = socket.getdefaulttimeout()
socket.setdefaulttimeout(timeout)
try:
tries = 0
while True:
tries += 1
args = dict(kwargs)
url = "http://%s%s" % (self.host, request_path)
if args:
url += "?" + urllib.urlencode(args)
req = self._CreateRequest(url=url, data=payload)
req.add_header("Content-Type", content_type)
try:
f = self.opener.open(req)
response = f.read()
f.close()
return response
except urllib2.HTTPError, e:
if tries > 3:
raise
elif e.code == 401 or e.code == 302:
self._Authenticate()
else:
raise
finally:
socket.setdefaulttimeout(old_timeout)
class HttpRpcServer(AbstractRpcServer):
"""Provides a simplified RPC-style interface for HTTP requests."""
def _Authenticate(self):
"""Save the cookie jar after authentication."""
super(HttpRpcServer, self)._Authenticate()
if self.save_cookies:
StatusUpdate("Saving authentication cookies to %s" % self.cookie_file)
self.cookie_jar.save()
def _GetOpener(self):
"""Returns an OpenerDirector that supports cookies and ignores redirects.
Returns:
A urllib2.OpenerDirector object.
"""
opener = urllib2.OpenerDirector()
opener.add_handler(urllib2.ProxyHandler())
opener.add_handler(urllib2.UnknownHandler())
opener.add_handler(urllib2.HTTPHandler())
opener.add_handler(urllib2.HTTPDefaultErrorHandler())
opener.add_handler(urllib2.HTTPSHandler())
opener.add_handler(urllib2.HTTPErrorProcessor())
if self.save_cookies:
self.cookie_file = os.path.expanduser("~/.codereview_upload_cookies_" + server)
self.cookie_jar = cookielib.MozillaCookieJar(self.cookie_file)
if os.path.exists(self.cookie_file):
try:
self.cookie_jar.load()
self.authenticated = True
StatusUpdate("Loaded authentication cookies from %s" %
self.cookie_file)
except (cookielib.LoadError, IOError):
# Failed to load cookies - just ignore them.
pass
else:
# Create an empty cookie file with mode 600
fd = os.open(self.cookie_file, os.O_CREAT, 0600)
os.close(fd)
# Always chmod the cookie file
os.chmod(self.cookie_file, 0600)
else:
# Don't save cookies across runs of update.py.
self.cookie_jar = cookielib.CookieJar()
opener.add_handler(urllib2.HTTPCookieProcessor(self.cookie_jar))
return opener
parser = optparse.OptionParser(usage="%prog [options] [-- diff_options]")
parser.add_option("-y", "--assume_yes", action="store_true",
dest="assume_yes", default=False,
help="Assume that the answer to yes/no questions is 'yes'.")
# Logging
group = parser.add_option_group("Logging options")
group.add_option("-q", "--quiet", action="store_const", const=0,
dest="verbose", help="Print errors only.")
group.add_option("-v", "--verbose", action="store_const", const=2,
dest="verbose", default=1,
help="Print info level logs (default).")
group.add_option("--noisy", action="store_const", const=3,
dest="verbose", help="Print all logs.")
# Review server
group = parser.add_option_group("Review server options")
group.add_option("-s", "--server", action="store", dest="server",
default="codereview.appspot.com",
metavar="SERVER",
help=("The server to upload to. The format is host[:port]. "
"Defaults to '%default'."))
group.add_option("-e", "--email", action="store", dest="email",
metavar="EMAIL", default=None,
help="The username to use. Will prompt if omitted.")
group.add_option("-H", "--host", action="store", dest="host",
metavar="HOST", default=None,
help="Overrides the Host header sent with all RPCs.")
group.add_option("--no_cookies", action="store_false",
dest="save_cookies", default=True,
help="Do not save authentication cookies to local disk.")
# Issue
group = parser.add_option_group("Issue options")
group.add_option("-d", "--description", action="store", dest="description",
metavar="DESCRIPTION", default=None,
help="Optional description when creating an issue.")
group.add_option("-f", "--description_file", action="store",
dest="description_file", metavar="DESCRIPTION_FILE",
default=None,
help="Optional path of a file that contains "
"the description when creating an issue.")
group.add_option("-r", "--reviewers", action="store", dest="reviewers",
metavar="REVIEWERS", default=None,
help="Add reviewers (comma separated email addresses).")
group.add_option("--cc", action="store", dest="cc",
metavar="CC", default=None,
help="Add CC (comma separated email addresses).")
group.add_option("--private", action="store_true", dest="private",
default=False,
help="Make the issue restricted to reviewers and those CCed")
# Upload options
group = parser.add_option_group("Patch options")
group.add_option("-m", "--message", action="store", dest="message",
metavar="MESSAGE", default=None,
help="A message to identify the patch. "
"Will prompt if omitted.")
group.add_option("-i", "--issue", type="int", action="store",
metavar="ISSUE", default=None,
help="Issue number to which to add. Defaults to new issue.")
group.add_option("--download_base", action="store_true",
dest="download_base", default=False,
help="Base files will be downloaded by the server "
"(side-by-side diffs may not work on files with CRs).")
group.add_option("--rev", action="store", dest="revision",
metavar="REV", default=None,
help="Branch/tree/revision to diff against (used by DVCS).")
group.add_option("--send_mail", action="store_true",
dest="send_mail", default=False,
help="Send notification email to reviewers.")
group.add_option("--vcs", action="store", dest="vcs",
metavar="VCS", default=None,
help=("Version control system (optional, usually upload.py "
"already guesses the right VCS)."))
def GetRpcServer(options):
"""Returns an instance of an AbstractRpcServer.
Returns:
A new AbstractRpcServer, on which RPC calls can be made.
"""
rpc_server_class = HttpRpcServer
def GetUserCredentials():
"""Prompts the user for a username and password."""
email = options.email
if email is None:
email = GetEmail("Email (login for uploading to %s)" % options.server)
password = getpass.getpass("Password for %s: " % email)
return (email, password)
# If this is the dev_appserver, use fake authentication.
host = (options.host or options.server).lower()
if host == "localhost" or host.startswith("localhost:"):
email = options.email
if email is None:
email = "test@example.com"
logging.info("Using debug user %s. Override with --email" % email)
server = rpc_server_class(
options.server,
lambda: (email, "password"),
host_override=options.host,
extra_headers={"Cookie":
'dev_appserver_login="%s:False"' % email},
save_cookies=options.save_cookies)
# Don't try to talk to ClientLogin.
server.authenticated = True
return server
return rpc_server_class(options.server, GetUserCredentials,
host_override=options.host,
save_cookies=options.save_cookies)
def EncodeMultipartFormData(fields, files):
"""Encode form fields for multipart/form-data.
Args:
fields: A sequence of (name, value) elements for regular form fields.
files: A sequence of (name, filename, value) elements for data to be
uploaded as files.
Returns:
(content_type, body) ready for httplib.HTTP instance.
Source:
http://aspn.activestate.com/ASPN/Cookbook/Python/Recipe/146306
"""
BOUNDARY = '-M-A-G-I-C---B-O-U-N-D-A-R-Y-'
CRLF = '\r\n'
lines = []
for (key, value) in fields:
lines.append('--' + BOUNDARY)
lines.append('Content-Disposition: form-data; name="%s"' % key)
lines.append('')
if type(value) == unicode:
value = value.encode("utf-8")
lines.append(value)
for (key, filename, value) in files:
if type(filename) == unicode:
filename = filename.encode("utf-8")
if type(value) == unicode:
value = value.encode("utf-8")
lines.append('--' + BOUNDARY)
lines.append('Content-Disposition: form-data; name="%s"; filename="%s"' %
(key, filename))
lines.append('Content-Type: %s' % GetContentType(filename))
lines.append('')
lines.append(value)
lines.append('--' + BOUNDARY + '--')
lines.append('')
body = CRLF.join(lines)
content_type = 'multipart/form-data; boundary=%s' % BOUNDARY
return content_type, body
def GetContentType(filename):
"""Helper to guess the content-type from the filename."""
return mimetypes.guess_type(filename)[0] or 'application/octet-stream'
# Use a shell for subcommands on Windows to get a PATH search.
use_shell = sys.platform.startswith("win")
def RunShellWithReturnCode(command, print_output=False,
universal_newlines=True,
env=os.environ):
"""Executes a command and returns the output from stdout and the return code.
Args:
command: Command to execute.
print_output: If True, the output is printed to stdout.
If False, both stdout and stderr are ignored.
universal_newlines: Use universal_newlines flag (default: True).
Returns:
Tuple (output, return code)
"""
logging.info("Running %s", command)
p = subprocess.Popen(command, stdout=subprocess.PIPE, stderr=subprocess.PIPE,
shell=use_shell, universal_newlines=universal_newlines,
env=env)
if print_output:
output_array = []
while True:
line = p.stdout.readline()
if not line:
break
print line.strip("\n")
output_array.append(line)
output = "".join(output_array)
else:
output = p.stdout.read()
p.wait()
errout = p.stderr.read()
if print_output and errout:
print >>sys.stderr, errout
p.stdout.close()
p.stderr.close()
return output, p.returncode
def RunShell(command, silent_ok=False, universal_newlines=True,
print_output=False, env=os.environ):
data, retcode = RunShellWithReturnCode(command, print_output,
universal_newlines, env)
if retcode:
ErrorExit("Got error status from %s:\n%s" % (command, data))
if not silent_ok and not data:
ErrorExit("No output from %s" % command)
return data
class VersionControlSystem(object):
"""Abstract base class providing an interface to the VCS."""
def __init__(self, options):
"""Constructor.
Args:
options: Command line options.
"""
self.options = options
def GenerateDiff(self, args):
"""Return the current diff as a string.
Args:
args: Extra arguments to pass to the diff command.
"""
raise NotImplementedError(
"abstract method -- subclass %s must override" % self.__class__)
def GetUnknownFiles(self):
"""Return a list of files unknown to the VCS."""
raise NotImplementedError(
"abstract method -- subclass %s must override" % self.__class__)
def CheckForUnknownFiles(self):
"""Show an "are you sure?" prompt if there are unknown files."""
unknown_files = self.GetUnknownFiles()
if unknown_files:
print "The following files are not added to version control:"
for line in unknown_files:
print line
prompt = "Are you sure to continue?(y/N) "
answer = raw_input(prompt).strip()
if answer != "y":
ErrorExit("User aborted")
def GetBaseFile(self, filename):
"""Get the content of the upstream version of a file.
Returns:
A tuple (base_content, new_content, is_binary, status)
base_content: The contents of the base file.
new_content: For text files, this is empty. For binary files, this is
the contents of the new file, since the diff output won't contain
information to reconstruct the current file.
is_binary: True iff the file is binary.
status: The status of the file.
"""
raise NotImplementedError(
"abstract method -- subclass %s must override" % self.__class__)
def GetBaseFiles(self, diff):
"""Helper that calls GetBase file for each file in the patch.
Returns:
A dictionary that maps from filename to GetBaseFile's tuple. Filenames
are retrieved based on lines that start with "Index:" or
"Property changes on:".
"""
files = {}
for line in diff.splitlines(True):
if line.startswith('Index:') or line.startswith('Property changes on:'):
unused, filename = line.split(':', 1)
# On Windows if a file has property changes its filename uses '\'
# instead of '/'.
filename = filename.strip().replace('\\', '/')
files[filename] = self.GetBaseFile(filename)
return files
def UploadBaseFiles(self, issue, rpc_server, patch_list, patchset, options,
files):
"""Uploads the base files (and if necessary, the current ones as well)."""
def UploadFile(filename, file_id, content, is_binary, status, is_base):
"""Uploads a file to the server."""
file_too_large = False
if is_base:
type = "base"
else:
type = "current"
if len(content) > MAX_UPLOAD_SIZE:
print ("Not uploading the %s file for %s because it's too large." %
(type, filename))
file_too_large = True
content = ""
checksum = md5(content).hexdigest()
if options.verbose > 0 and not file_too_large:
print "Uploading %s file for %s" % (type, filename)
url = "/%d/upload_content/%d/%d" % (int(issue), int(patchset), file_id)
form_fields = [("filename", filename),
("status", status),
("checksum", checksum),
("is_binary", str(is_binary)),
("is_current", str(not is_base)),
]
if file_too_large:
form_fields.append(("file_too_large", "1"))
if options.email:
form_fields.append(("user", options.email))
ctype, body = EncodeMultipartFormData(form_fields,
[("data", filename, content)])
response_body = rpc_server.Send(url, body,
content_type=ctype)
if not response_body.startswith("OK"):
StatusUpdate(" --> %s" % response_body)
sys.exit(1)
patches = dict()
[patches.setdefault(v, k) for k, v in patch_list]
for filename in patches.keys():
base_content, new_content, is_binary, status = files[filename]
file_id_str = patches.get(filename)
if file_id_str.find("nobase") != -1:
base_content = None
file_id_str = file_id_str[file_id_str.rfind("_") + 1:]
file_id = int(file_id_str)
if base_content != None:
UploadFile(filename, file_id, base_content, is_binary, status, True)
if new_content != None:
UploadFile(filename, file_id, new_content, is_binary, status, False)
def IsImage(self, filename):
"""Returns true if the filename has an image extension."""
mimetype = mimetypes.guess_type(filename)[0]
if not mimetype:
return False
return mimetype.startswith("image/")
def IsBinary(self, filename):
"""Returns true if the guessed mimetyped isnt't in text group."""
mimetype = mimetypes.guess_type(filename)[0]
if not mimetype:
return False # e.g. README, "real" binaries usually have an extension
# special case for text files which don't start with text/
if mimetype in TEXT_MIMETYPES:
return False
return not mimetype.startswith("text/")
class SubversionVCS(VersionControlSystem):
"""Implementation of the VersionControlSystem interface for Subversion."""
def __init__(self, options):
super(SubversionVCS, self).__init__(options)
if self.options.revision:
match = re.match(r"(\d+)(:(\d+))?", self.options.revision)
if not match:
ErrorExit("Invalid Subversion revision %s." % self.options.revision)
self.rev_start = match.group(1)
self.rev_end = match.group(3)
else:
self.rev_start = self.rev_end = None
# Cache output from "svn list -r REVNO dirname".
# Keys: dirname, Values: 2-tuple (ouput for start rev and end rev).
self.svnls_cache = {}
# SVN base URL is required to fetch files deleted in an older revision.
# Result is cached to not guess it over and over again in GetBaseFile().
required = self.options.download_base or self.options.revision is not None
self.svn_base = self._GuessBase(required)
def GuessBase(self, required):
"""Wrapper for _GuessBase."""
return self.svn_base
def _GuessBase(self, required):
"""Returns the SVN base URL.
Args:
required: If true, exits if the url can't be guessed, otherwise None is
returned.
"""
info = RunShell(["svn", "info"])
for line in info.splitlines():
words = line.split()
if len(words) == 2 and words[0] == "URL:":
url = words[1]
scheme, netloc, path, params, query, fragment = urlparse.urlparse(url)
username, netloc = urllib.splituser(netloc)
if username:
logging.info("Removed username from base URL")
if netloc.endswith("svn.python.org"):
if netloc == "svn.python.org":
if path.startswith("/projects/"):
path = path[9:]
elif netloc != "pythondev@svn.python.org":
ErrorExit("Unrecognized Python URL: %s" % url)
base = "http://svn.python.org/view/*checkout*%s/" % path
logging.info("Guessed Python base = %s", base)
elif netloc.endswith("svn.collab.net"):
if path.startswith("/repos/"):
path = path[6:]
base = "http://svn.collab.net/viewvc/*checkout*%s/" % path
logging.info("Guessed CollabNet base = %s", base)
elif netloc.endswith(".googlecode.com"):
path = path + "/"
base = urlparse.urlunparse(("http", netloc, path, params,
query, fragment))
logging.info("Guessed Google Code base = %s", base)
else:
path = path + "/"
base = urlparse.urlunparse((scheme, netloc, path, params,
query, fragment))
logging.info("Guessed base = %s", base)
return base
if required:
ErrorExit("Can't find URL in output from svn info")
return None
def GenerateDiff(self, args):
cmd = ["svn", "diff"]
if self.options.revision:
cmd += ["-r", self.options.revision]
cmd.extend(args)
data = RunShell(cmd)
count = 0
for line in data.splitlines():
if line.startswith("Index:") or line.startswith("Property changes on:"):
count += 1
logging.info(line)
if not count:
ErrorExit("No valid patches found in output from svn diff")
return data
def _CollapseKeywords(self, content, keyword_str):
"""Collapses SVN keywords."""
# svn cat translates keywords but svn diff doesn't. As a result of this
# behavior patching.PatchChunks() fails with a chunk mismatch error.
# This part was originally written by the Review Board development team
# who had the same problem (http://reviews.review-board.org/r/276/).
# Mapping of keywords to known aliases
svn_keywords = {
# Standard keywords
'Date': ['Date', 'LastChangedDate'],
'Revision': ['Revision', 'LastChangedRevision', 'Rev'],
'Author': ['Author', 'LastChangedBy'],
'HeadURL': ['HeadURL', 'URL'],
'Id': ['Id'],
# Aliases
'LastChangedDate': ['LastChangedDate', 'Date'],
'LastChangedRevision': ['LastChangedRevision', 'Rev', 'Revision'],
'LastChangedBy': ['LastChangedBy', 'Author'],
'URL': ['URL', 'HeadURL'],
}
def repl(m):
if m.group(2):
return "$%s::%s$" % (m.group(1), " " * len(m.group(3)))
return "$%s$" % m.group(1)
keywords = [keyword
for name in keyword_str.split(" ")
for keyword in svn_keywords.get(name, [])]
return re.sub(r"\$(%s):(:?)([^\$]+)\$" % '|'.join(keywords), repl, content)
def GetUnknownFiles(self):
status = RunShell(["svn", "status", "--ignore-externals"], silent_ok=True)
unknown_files = []
for line in status.split("\n"):
if line and line[0] == "?":
unknown_files.append(line)
return unknown_files
def ReadFile(self, filename):
"""Returns the contents of a file."""
file = open(filename, 'rb')
result = ""
try:
result = file.read()
finally:
file.close()
return result
def GetStatus(self, filename):
"""Returns the status of a file."""
if not self.options.revision:
status = RunShell(["svn", "status", "--ignore-externals", filename])
if not status:
ErrorExit("svn status returned no output for %s" % filename)
status_lines = status.splitlines()
# If file is in a cl, the output will begin with
# "\n--- Changelist 'cl_name':\n". See
# http://svn.collab.net/repos/svn/trunk/notes/changelist-design.txt
if (len(status_lines) == 3 and
not status_lines[0] and
status_lines[1].startswith("--- Changelist")):
status = status_lines[2]
else:
status = status_lines[0]
# If we have a revision to diff against we need to run "svn list"
# for the old and the new revision and compare the results to get
# the correct status for a file.
else:
dirname, relfilename = os.path.split(filename)
if dirname not in self.svnls_cache:
cmd = ["svn", "list", "-r", self.rev_start, dirname or "."]
out, returncode = RunShellWithReturnCode(cmd)
if returncode:
ErrorExit("Failed to get status for %s." % filename)
old_files = out.splitlines()
args = ["svn", "list"]
if self.rev_end:
args += ["-r", self.rev_end]
cmd = args + [dirname or "."]
out, returncode = RunShellWithReturnCode(cmd)
if returncode:
ErrorExit("Failed to run command %s" % cmd)
self.svnls_cache[dirname] = (old_files, out.splitlines())
old_files, new_files = self.svnls_cache[dirname]
if relfilename in old_files and relfilename not in new_files:
status = "D "
elif relfilename in old_files and relfilename in new_files:
status = "M "
else:
status = "A "
return status
def GetBaseFile(self, filename):
status = self.GetStatus(filename)
base_content = None
new_content = None
# If a file is copied its status will be "A +", which signifies
# "addition-with-history". See "svn st" for more information. We need to
# upload the original file or else diff parsing will fail if the file was
# edited.
if status[0] == "A" and status[3] != "+":
# We'll need to upload the new content if we're adding a binary file
# since diff's output won't contain it.
mimetype = RunShell(["svn", "propget", "svn:mime-type", filename],
silent_ok=True)
base_content = ""
is_binary = bool(mimetype) and not mimetype.startswith("text/")
if is_binary and self.IsImage(filename):
new_content = self.ReadFile(filename)
elif (status[0] in ("M", "D", "R") or
(status[0] == "A" and status[3] == "+") or # Copied file.
(status[0] == " " and status[1] == "M")): # Property change.
args = []
if self.options.revision:
url = "%s/%s@%s" % (self.svn_base, filename, self.rev_start)
else:
# Don't change filename, it's needed later.
url = filename
args += ["-r", "BASE"]
cmd = ["svn"] + args + ["propget", "svn:mime-type", url]
mimetype, returncode = RunShellWithReturnCode(cmd)
if returncode:
# File does not exist in the requested revision.
# Reset mimetype, it contains an error message.
mimetype = ""
get_base = False
is_binary = bool(mimetype) and not mimetype.startswith("text/")
if status[0] == " ":
# Empty base content just to force an upload.
base_content = ""
elif is_binary:
if self.IsImage(filename):
get_base = True
if status[0] == "M":
if not self.rev_end:
new_content = self.ReadFile(filename)
else:
url = "%s/%s@%s" % (self.svn_base, filename, self.rev_end)
new_content = RunShell(["svn", "cat", url],
universal_newlines=True, silent_ok=True)
else:
base_content = ""
else:
get_base = True
if get_base:
if is_binary:
universal_newlines = False
else:
universal_newlines = True
if self.rev_start:
# "svn cat -r REV delete_file.txt" doesn't work. cat requires
# the full URL with "@REV" appended instead of using "-r" option.
url = "%s/%s@%s" % (self.svn_base, filename, self.rev_start)
base_content = RunShell(["svn", "cat", url],
universal_newlines=universal_newlines,
silent_ok=True)
else:
base_content = RunShell(["svn", "cat", filename],
universal_newlines=universal_newlines,
silent_ok=True)
if not is_binary:
args = []
if self.rev_start:
url = "%s/%s@%s" % (self.svn_base, filename, self.rev_start)
else:
url = filename
args += ["-r", "BASE"]
cmd = ["svn"] + args + ["propget", "svn:keywords", url]
keywords, returncode = RunShellWithReturnCode(cmd)
if keywords and not returncode:
base_content = self._CollapseKeywords(base_content, keywords)
else:
StatusUpdate("svn status returned unexpected output: %s" % status)
sys.exit(1)
return base_content, new_content, is_binary, status[0:5]
class GitVCS(VersionControlSystem):
"""Implementation of the VersionControlSystem interface for Git."""
def __init__(self, options):
super(GitVCS, self).__init__(options)
# Map of filename -> (hash before, hash after) of base file.
# Hashes for "no such file" are represented as None.
self.hashes = {}
# Map of new filename -> old filename for renames.
self.renames = {}
def GenerateDiff(self, extra_args):
# This is more complicated than svn's GenerateDiff because we must convert
# the diff output to include an svn-style "Index:" line as well as record
# the hashes of the files, so we can upload them along with our diff.
# Special used by git to indicate "no such content".
NULL_HASH = "0"*40
extra_args = extra_args[:]
if self.options.revision:
extra_args = [self.options.revision] + extra_args
extra_args.append('-M')
# --no-ext-diff is broken in some versions of Git, so try to work around
# this by overriding the environment (but there is still a problem if the
# git config key "diff.external" is used).
env = os.environ.copy()
if 'GIT_EXTERNAL_DIFF' in env: del env['GIT_EXTERNAL_DIFF']
gitdiff = RunShell(["git", "diff", "--no-ext-diff", "--full-index"]
+ extra_args, env=env)
svndiff = []
filecount = 0
filename = None
for line in gitdiff.splitlines():
match = re.match(r"diff --git a/(.*) b/(.*)$", line)
if match:
filecount += 1
# Intentionally use the "after" filename so we can show renames.
filename = match.group(2)
svndiff.append("Index: %s\n" % filename)
if match.group(1) != match.group(2):
self.renames[match.group(2)] = match.group(1)
else:
# The "index" line in a git diff looks like this (long hashes elided):
# index 82c0d44..b2cee3f 100755
# We want to save the left hash, as that identifies the base file.
match = re.match(r"index (\w+)\.\.(\w+)", line)
if match:
before, after = (match.group(1), match.group(2))
if before == NULL_HASH:
before = None
if after == NULL_HASH:
after = None
self.hashes[filename] = (before, after)
svndiff.append(line + "\n")
if not filecount:
ErrorExit("No valid patches found in output from git diff")
return "".join(svndiff)
def GetUnknownFiles(self):
status = RunShell(["git", "ls-files", "--exclude-standard", "--others"],
silent_ok=True)
return status.splitlines()
def GetFileContent(self, file_hash, is_binary):
"""Returns the content of a file identified by its git hash."""
data, retcode = RunShellWithReturnCode(["git", "show", file_hash],
universal_newlines=not is_binary)
if retcode:
ErrorExit("Got error status from 'git show %s'" % file_hash)
return data
def GetBaseFile(self, filename):
hash_before, hash_after = self.hashes.get(filename, (None,None))
base_content = None
new_content = None
is_binary = self.IsBinary(filename)
status = None
if filename in self.renames:
status = "A +" # Match svn attribute name for renames.
if filename not in self.hashes:
# If a rename doesn't change the content, we never get a hash.
base_content = RunShell(["git", "show", filename])
elif not hash_before:
status = "A"
base_content = ""
elif not hash_after:
status = "D"
else:
status = "M"
is_image = self.IsImage(filename)
# Grab the before/after content if we need it.
# We should include file contents if it's text or it's an image.
if not is_binary or is_image:
# Grab the base content if we don't have it already.
if base_content is None and hash_before:
base_content = self.GetFileContent(hash_before, is_binary)
# Only include the "after" file if it's an image; otherwise it
# it is reconstructed from the diff.
if is_image and hash_after:
new_content = self.GetFileContent(hash_after, is_binary)
return (base_content, new_content, is_binary, status)
class MercurialVCS(VersionControlSystem):
"""Implementation of the VersionControlSystem interface for Mercurial."""
def __init__(self, options, repo_dir):
super(MercurialVCS, self).__init__(options)
# Absolute path to repository (we can be in a subdir)
self.repo_dir = os.path.normpath(repo_dir)
# Compute the subdir
cwd = os.path.normpath(os.getcwd())
assert cwd.startswith(self.repo_dir)
self.subdir = cwd[len(self.repo_dir):].lstrip(r"\/")
if self.options.revision:
self.base_rev = self.options.revision
else:
self.base_rev = RunShell(["hg", "parent", "-q"]).split(':')[1].strip()
def _GetRelPath(self, filename):
"""Get relative path of a file according to the current directory,
given its logical path in the repo."""
assert filename.startswith(self.subdir), (filename, self.subdir)
return filename[len(self.subdir):].lstrip(r"\/")
def GenerateDiff(self, extra_args):
# If no file specified, restrict to the current subdir
extra_args = extra_args or ["."]
cmd = ["hg", "diff", "--git", "-r", self.base_rev] + extra_args
data = RunShell(cmd, silent_ok=True)
svndiff = []
filecount = 0
for line in data.splitlines():
m = re.match("diff --git a/(\S+) b/(\S+)", line)
if m:
# Modify line to make it look like as it comes from svn diff.
# With this modification no changes on the server side are required
# to make upload.py work with Mercurial repos.
# NOTE: for proper handling of moved/copied files, we have to use
# the second filename.
filename = m.group(2)
svndiff.append("Index: %s" % filename)
svndiff.append("=" * 67)
filecount += 1
logging.info(line)
else:
svndiff.append(line)
if not filecount:
ErrorExit("No valid patches found in output from hg diff")
return "\n".join(svndiff) + "\n"
def GetUnknownFiles(self):
"""Return a list of files unknown to the VCS."""
args = []
status = RunShell(["hg", "status", "--rev", self.base_rev, "-u", "."],
silent_ok=True)
unknown_files = []
for line in status.splitlines():
st, fn = line.split(" ", 1)
if st == "?":
unknown_files.append(fn)
return unknown_files
def GetBaseFile(self, filename):
# "hg status" and "hg cat" both take a path relative to the current subdir
# rather than to the repo root, but "hg diff" has given us the full path
# to the repo root.
base_content = ""
new_content = None
is_binary = False
oldrelpath = relpath = self._GetRelPath(filename)