| // Copyright 2015 The Go Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style |
| // license that can be found in the LICENSE file. |
| |
| // +build ignore |
| |
| package main |
| |
| import "strings" |
| |
| // Notes: |
| // - Integer types live in the low portion of registers. Upper portions are junk. |
| // - Boolean types use the low-order byte of a register. 0=false, 1=true. |
| // Upper bytes are junk. |
| // - Floating-point types live in the low natural slot of an sse2 register. |
| // Unused portions are junk. |
| // - We do not use AH,BH,CH,DH registers. |
| // - When doing sub-register operations, we try to write the whole |
| // destination register to avoid a partial-register write. |
| // - Unused portions of AuxInt (or the Val portion of ValAndOff) are |
| // filled by sign-extending the used portion. Users of AuxInt which interpret |
| // AuxInt as unsigned (e.g. shifts) must be careful. |
| // - All SymOff opcodes require their offset to fit in an int32. |
| |
| // Suffixes encode the bit width of various instructions. |
| // Q (quad word) = 64 bit |
| // L (long word) = 32 bit |
| // W (word) = 16 bit |
| // B (byte) = 8 bit |
| |
| // copied from ../../amd64/reg.go |
| var regNamesAMD64 = []string{ |
| "AX", |
| "CX", |
| "DX", |
| "BX", |
| "SP", |
| "BP", |
| "SI", |
| "DI", |
| "R8", |
| "R9", |
| "R10", |
| "R11", |
| "R12", |
| "R13", |
| "R14", |
| "R15", |
| "X0", |
| "X1", |
| "X2", |
| "X3", |
| "X4", |
| "X5", |
| "X6", |
| "X7", |
| "X8", |
| "X9", |
| "X10", |
| "X11", |
| "X12", |
| "X13", |
| "X14", |
| "X15", |
| |
| // If you add registers, update asyncPreempt in runtime |
| |
| // pseudo-registers |
| "SB", |
| } |
| |
| func init() { |
| // Make map from reg names to reg integers. |
| if len(regNamesAMD64) > 64 { |
| panic("too many registers") |
| } |
| num := map[string]int{} |
| for i, name := range regNamesAMD64 { |
| num[name] = i |
| } |
| buildReg := func(s string) regMask { |
| m := regMask(0) |
| for _, r := range strings.Split(s, " ") { |
| if n, ok := num[r]; ok { |
| m |= regMask(1) << uint(n) |
| continue |
| } |
| panic("register " + r + " not found") |
| } |
| return m |
| } |
| |
| // Common individual register masks |
| var ( |
| ax = buildReg("AX") |
| cx = buildReg("CX") |
| dx = buildReg("DX") |
| bx = buildReg("BX") |
| gp = buildReg("AX CX DX BX BP SI DI R8 R9 R10 R11 R12 R13 R14 R15") |
| fp = buildReg("X0 X1 X2 X3 X4 X5 X6 X7 X8 X9 X10 X11 X12 X13 X14 X15") |
| gpsp = gp | buildReg("SP") |
| gpspsb = gpsp | buildReg("SB") |
| callerSave = gp | fp |
| ) |
| // Common slices of register masks |
| var ( |
| gponly = []regMask{gp} |
| fponly = []regMask{fp} |
| ) |
| |
| // Common regInfo |
| var ( |
| gp01 = regInfo{inputs: nil, outputs: gponly} |
| gp11 = regInfo{inputs: []regMask{gp}, outputs: gponly} |
| gp11sp = regInfo{inputs: []regMask{gpsp}, outputs: gponly} |
| gp11sb = regInfo{inputs: []regMask{gpspsb}, outputs: gponly} |
| gp21 = regInfo{inputs: []regMask{gp, gp}, outputs: gponly} |
| gp21sp = regInfo{inputs: []regMask{gpsp, gp}, outputs: gponly} |
| gp21sb = regInfo{inputs: []regMask{gpspsb, gpsp}, outputs: gponly} |
| gp21shift = regInfo{inputs: []regMask{gp, cx}, outputs: []regMask{gp}} |
| gp11div = regInfo{inputs: []regMask{ax, gpsp &^ dx}, outputs: []regMask{ax, dx}} |
| gp21hmul = regInfo{inputs: []regMask{ax, gpsp}, outputs: []regMask{dx}, clobbers: ax} |
| gp21flags = regInfo{inputs: []regMask{gp, gp}, outputs: []regMask{gp, 0}} |
| gp2flags1flags = regInfo{inputs: []regMask{gp, gp, 0}, outputs: []regMask{gp, 0}} |
| |
| gp2flags = regInfo{inputs: []regMask{gpsp, gpsp}} |
| gp1flags = regInfo{inputs: []regMask{gpsp}} |
| gp0flagsLoad = regInfo{inputs: []regMask{gpspsb, 0}} |
| gp1flagsLoad = regInfo{inputs: []regMask{gpspsb, gpsp, 0}} |
| gp2flagsLoad = regInfo{inputs: []regMask{gpspsb, gpsp, gpsp, 0}} |
| flagsgp = regInfo{inputs: nil, outputs: gponly} |
| |
| gp11flags = regInfo{inputs: []regMask{gp}, outputs: []regMask{gp, 0}} |
| gp1flags1flags = regInfo{inputs: []regMask{gp, 0}, outputs: []regMask{gp, 0}} |
| |
| readflags = regInfo{inputs: nil, outputs: gponly} |
| flagsgpax = regInfo{inputs: nil, clobbers: ax, outputs: []regMask{gp &^ ax}} |
| |
| gpload = regInfo{inputs: []regMask{gpspsb, 0}, outputs: gponly} |
| gp21load = regInfo{inputs: []regMask{gp, gpspsb, 0}, outputs: gponly} |
| gploadidx = regInfo{inputs: []regMask{gpspsb, gpsp, 0}, outputs: gponly} |
| gp21loadidx = regInfo{inputs: []regMask{gp, gpspsb, gpsp, 0}, outputs: gponly} |
| gp21pax = regInfo{inputs: []regMask{gp &^ ax, gp}, outputs: []regMask{gp &^ ax}, clobbers: ax} |
| |
| gpstore = regInfo{inputs: []regMask{gpspsb, gpsp, 0}} |
| gpstoreconst = regInfo{inputs: []regMask{gpspsb, 0}} |
| gpstoreidx = regInfo{inputs: []regMask{gpspsb, gpsp, gpsp, 0}} |
| gpstoreconstidx = regInfo{inputs: []regMask{gpspsb, gpsp, 0}} |
| gpstorexchg = regInfo{inputs: []regMask{gp, gpspsb, 0}, outputs: []regMask{gp}} |
| cmpxchg = regInfo{inputs: []regMask{gp, ax, gp, 0}, outputs: []regMask{gp, 0}, clobbers: ax} |
| |
| fp01 = regInfo{inputs: nil, outputs: fponly} |
| fp21 = regInfo{inputs: []regMask{fp, fp}, outputs: fponly} |
| fp31 = regInfo{inputs: []regMask{fp, fp, fp}, outputs: fponly} |
| fp21load = regInfo{inputs: []regMask{fp, gpspsb, 0}, outputs: fponly} |
| fp21loadidx = regInfo{inputs: []regMask{fp, gpspsb, gpspsb, 0}, outputs: fponly} |
| fpgp = regInfo{inputs: fponly, outputs: gponly} |
| gpfp = regInfo{inputs: gponly, outputs: fponly} |
| fp11 = regInfo{inputs: fponly, outputs: fponly} |
| fp2flags = regInfo{inputs: []regMask{fp, fp}} |
| |
| fpload = regInfo{inputs: []regMask{gpspsb, 0}, outputs: fponly} |
| fploadidx = regInfo{inputs: []regMask{gpspsb, gpsp, 0}, outputs: fponly} |
| |
| fpstore = regInfo{inputs: []regMask{gpspsb, fp, 0}} |
| fpstoreidx = regInfo{inputs: []regMask{gpspsb, gpsp, fp, 0}} |
| ) |
| |
| var AMD64ops = []opData{ |
| // fp ops |
| {name: "ADDSS", argLength: 2, reg: fp21, asm: "ADDSS", commutative: true, resultInArg0: true}, // fp32 add |
| {name: "ADDSD", argLength: 2, reg: fp21, asm: "ADDSD", commutative: true, resultInArg0: true}, // fp64 add |
| {name: "SUBSS", argLength: 2, reg: fp21, asm: "SUBSS", resultInArg0: true}, // fp32 sub |
| {name: "SUBSD", argLength: 2, reg: fp21, asm: "SUBSD", resultInArg0: true}, // fp64 sub |
| {name: "MULSS", argLength: 2, reg: fp21, asm: "MULSS", commutative: true, resultInArg0: true}, // fp32 mul |
| {name: "MULSD", argLength: 2, reg: fp21, asm: "MULSD", commutative: true, resultInArg0: true}, // fp64 mul |
| {name: "DIVSS", argLength: 2, reg: fp21, asm: "DIVSS", resultInArg0: true}, // fp32 div |
| {name: "DIVSD", argLength: 2, reg: fp21, asm: "DIVSD", resultInArg0: true}, // fp64 div |
| |
| {name: "MOVSSload", argLength: 2, reg: fpload, asm: "MOVSS", aux: "SymOff", faultOnNilArg0: true, symEffect: "Read"}, // fp32 load |
| {name: "MOVSDload", argLength: 2, reg: fpload, asm: "MOVSD", aux: "SymOff", faultOnNilArg0: true, symEffect: "Read"}, // fp64 load |
| {name: "MOVSSconst", reg: fp01, asm: "MOVSS", aux: "Float32", rematerializeable: true}, // fp32 constant |
| {name: "MOVSDconst", reg: fp01, asm: "MOVSD", aux: "Float64", rematerializeable: true}, // fp64 constant |
| {name: "MOVSSloadidx1", argLength: 3, reg: fploadidx, asm: "MOVSS", scale: 1, aux: "SymOff", symEffect: "Read"}, // fp32 load indexed by i |
| {name: "MOVSSloadidx4", argLength: 3, reg: fploadidx, asm: "MOVSS", scale: 4, aux: "SymOff", symEffect: "Read"}, // fp32 load indexed by 4*i |
| {name: "MOVSDloadidx1", argLength: 3, reg: fploadidx, asm: "MOVSD", scale: 1, aux: "SymOff", symEffect: "Read"}, // fp64 load indexed by i |
| {name: "MOVSDloadidx8", argLength: 3, reg: fploadidx, asm: "MOVSD", scale: 8, aux: "SymOff", symEffect: "Read"}, // fp64 load indexed by 8*i |
| |
| {name: "MOVSSstore", argLength: 3, reg: fpstore, asm: "MOVSS", aux: "SymOff", faultOnNilArg0: true, symEffect: "Write"}, // fp32 store |
| {name: "MOVSDstore", argLength: 3, reg: fpstore, asm: "MOVSD", aux: "SymOff", faultOnNilArg0: true, symEffect: "Write"}, // fp64 store |
| {name: "MOVSSstoreidx1", argLength: 4, reg: fpstoreidx, asm: "MOVSS", scale: 1, aux: "SymOff", symEffect: "Write"}, // fp32 indexed by i store |
| {name: "MOVSSstoreidx4", argLength: 4, reg: fpstoreidx, asm: "MOVSS", scale: 4, aux: "SymOff", symEffect: "Write"}, // fp32 indexed by 4i store |
| {name: "MOVSDstoreidx1", argLength: 4, reg: fpstoreidx, asm: "MOVSD", scale: 1, aux: "SymOff", symEffect: "Write"}, // fp64 indexed by i store |
| {name: "MOVSDstoreidx8", argLength: 4, reg: fpstoreidx, asm: "MOVSD", scale: 8, aux: "SymOff", symEffect: "Write"}, // fp64 indexed by 8i store |
| |
| {name: "ADDSSload", argLength: 3, reg: fp21load, asm: "ADDSS", aux: "SymOff", resultInArg0: true, faultOnNilArg1: true, symEffect: "Read"}, // fp32 arg0 + tmp, tmp loaded from arg1+auxint+aux, arg2 = mem |
| {name: "ADDSDload", argLength: 3, reg: fp21load, asm: "ADDSD", aux: "SymOff", resultInArg0: true, faultOnNilArg1: true, symEffect: "Read"}, // fp64 arg0 + tmp, tmp loaded from arg1+auxint+aux, arg2 = mem |
| {name: "SUBSSload", argLength: 3, reg: fp21load, asm: "SUBSS", aux: "SymOff", resultInArg0: true, faultOnNilArg1: true, symEffect: "Read"}, // fp32 arg0 - tmp, tmp loaded from arg1+auxint+aux, arg2 = mem |
| {name: "SUBSDload", argLength: 3, reg: fp21load, asm: "SUBSD", aux: "SymOff", resultInArg0: true, faultOnNilArg1: true, symEffect: "Read"}, // fp64 arg0 - tmp, tmp loaded from arg1+auxint+aux, arg2 = mem |
| {name: "MULSSload", argLength: 3, reg: fp21load, asm: "MULSS", aux: "SymOff", resultInArg0: true, faultOnNilArg1: true, symEffect: "Read"}, // fp32 arg0 * tmp, tmp loaded from arg1+auxint+aux, arg2 = mem |
| {name: "MULSDload", argLength: 3, reg: fp21load, asm: "MULSD", aux: "SymOff", resultInArg0: true, faultOnNilArg1: true, symEffect: "Read"}, // fp64 arg0 * tmp, tmp loaded from arg1+auxint+aux, arg2 = mem |
| {name: "DIVSSload", argLength: 3, reg: fp21load, asm: "DIVSS", aux: "SymOff", resultInArg0: true, faultOnNilArg1: true, symEffect: "Read"}, // fp32 arg0 / tmp, tmp loaded from arg1+auxint+aux, arg2 = mem |
| {name: "DIVSDload", argLength: 3, reg: fp21load, asm: "DIVSD", aux: "SymOff", resultInArg0: true, faultOnNilArg1: true, symEffect: "Read"}, // fp64 arg0 / tmp, tmp loaded from arg1+auxint+aux, arg2 = mem |
| |
| {name: "ADDSSloadidx1", argLength: 4, reg: fp21loadidx, asm: "ADDSS", scale: 1, aux: "SymOff", resultInArg0: true, symEffect: "Read"}, // fp32 arg0 + tmp, tmp loaded from arg1+arg2+auxint+aux, arg3 = mem |
| {name: "ADDSSloadidx4", argLength: 4, reg: fp21loadidx, asm: "ADDSS", scale: 4, aux: "SymOff", resultInArg0: true, symEffect: "Read"}, // fp32 arg0 + tmp, tmp loaded from arg1+4*arg2+auxint+aux, arg3 = mem |
| {name: "ADDSDloadidx1", argLength: 4, reg: fp21loadidx, asm: "ADDSD", scale: 1, aux: "SymOff", resultInArg0: true, symEffect: "Read"}, // fp64 arg0 + tmp, tmp loaded from arg1+arg2+auxint+aux, arg3 = mem |
| {name: "ADDSDloadidx8", argLength: 4, reg: fp21loadidx, asm: "ADDSD", scale: 8, aux: "SymOff", resultInArg0: true, symEffect: "Read"}, // fp64 arg0 + tmp, tmp loaded from arg1+8*arg2+auxint+aux, arg3 = mem |
| {name: "SUBSSloadidx1", argLength: 4, reg: fp21loadidx, asm: "SUBSS", scale: 1, aux: "SymOff", resultInArg0: true, symEffect: "Read"}, // fp32 arg0 - tmp, tmp loaded from arg1+arg2+auxint+aux, arg3 = mem |
| {name: "SUBSSloadidx4", argLength: 4, reg: fp21loadidx, asm: "SUBSS", scale: 4, aux: "SymOff", resultInArg0: true, symEffect: "Read"}, // fp32 arg0 - tmp, tmp loaded from arg1+4*arg2+auxint+aux, arg3 = mem |
| {name: "SUBSDloadidx1", argLength: 4, reg: fp21loadidx, asm: "SUBSD", scale: 1, aux: "SymOff", resultInArg0: true, symEffect: "Read"}, // fp64 arg0 - tmp, tmp loaded from arg1+arg2+auxint+aux, arg3 = mem |
| {name: "SUBSDloadidx8", argLength: 4, reg: fp21loadidx, asm: "SUBSD", scale: 8, aux: "SymOff", resultInArg0: true, symEffect: "Read"}, // fp64 arg0 - tmp, tmp loaded from arg1+8*arg2+auxint+aux, arg3 = mem |
| {name: "MULSSloadidx1", argLength: 4, reg: fp21loadidx, asm: "MULSS", scale: 1, aux: "SymOff", resultInArg0: true, symEffect: "Read"}, // fp32 arg0 * tmp, tmp loaded from arg1+arg2+auxint+aux, arg3 = mem |
| {name: "MULSSloadidx4", argLength: 4, reg: fp21loadidx, asm: "MULSS", scale: 4, aux: "SymOff", resultInArg0: true, symEffect: "Read"}, // fp32 arg0 * tmp, tmp loaded from arg1+4*arg2+auxint+aux, arg3 = mem |
| {name: "MULSDloadidx1", argLength: 4, reg: fp21loadidx, asm: "MULSD", scale: 1, aux: "SymOff", resultInArg0: true, symEffect: "Read"}, // fp64 arg0 * tmp, tmp loaded from arg1+arg2+auxint+aux, arg3 = mem |
| {name: "MULSDloadidx8", argLength: 4, reg: fp21loadidx, asm: "MULSD", scale: 8, aux: "SymOff", resultInArg0: true, symEffect: "Read"}, // fp64 arg0 * tmp, tmp loaded from arg1+8*arg2+auxint+aux, arg3 = mem |
| {name: "DIVSSloadidx1", argLength: 4, reg: fp21loadidx, asm: "DIVSS", scale: 1, aux: "SymOff", resultInArg0: true, symEffect: "Read"}, // fp32 arg0 / tmp, tmp loaded from arg1+arg2+auxint+aux, arg3 = mem |
| {name: "DIVSSloadidx4", argLength: 4, reg: fp21loadidx, asm: "DIVSS", scale: 4, aux: "SymOff", resultInArg0: true, symEffect: "Read"}, // fp32 arg0 / tmp, tmp loaded from arg1+4*arg2+auxint+aux, arg3 = mem |
| {name: "DIVSDloadidx1", argLength: 4, reg: fp21loadidx, asm: "DIVSD", scale: 1, aux: "SymOff", resultInArg0: true, symEffect: "Read"}, // fp64 arg0 / tmp, tmp loaded from arg1+arg2+auxint+aux, arg3 = mem |
| {name: "DIVSDloadidx8", argLength: 4, reg: fp21loadidx, asm: "DIVSD", scale: 8, aux: "SymOff", resultInArg0: true, symEffect: "Read"}, // fp64 arg0 / tmp, tmp loaded from arg1+8*arg2+auxint+aux, arg3 = mem |
| |
| // binary ops |
| {name: "ADDQ", argLength: 2, reg: gp21sp, asm: "ADDQ", commutative: true, clobberFlags: true}, // arg0 + arg1 |
| {name: "ADDL", argLength: 2, reg: gp21sp, asm: "ADDL", commutative: true, clobberFlags: true}, // arg0 + arg1 |
| {name: "ADDQconst", argLength: 1, reg: gp11sp, asm: "ADDQ", aux: "Int32", typ: "UInt64", clobberFlags: true}, // arg0 + auxint |
| {name: "ADDLconst", argLength: 1, reg: gp11sp, asm: "ADDL", aux: "Int32", clobberFlags: true}, // arg0 + auxint |
| {name: "ADDQconstmodify", argLength: 2, reg: gpstoreconst, asm: "ADDQ", aux: "SymValAndOff", clobberFlags: true, faultOnNilArg0: true, symEffect: "Read,Write"}, // add ValAndOff(AuxInt).Val() to arg0+ValAndOff(AuxInt).Off()+aux, arg1=mem |
| {name: "ADDLconstmodify", argLength: 2, reg: gpstoreconst, asm: "ADDL", aux: "SymValAndOff", clobberFlags: true, faultOnNilArg0: true, symEffect: "Read,Write"}, // add ValAndOff(AuxInt).Val() to arg0+ValAndOff(AuxInt).Off()+aux, arg1=mem |
| |
| {name: "SUBQ", argLength: 2, reg: gp21, asm: "SUBQ", resultInArg0: true, clobberFlags: true}, // arg0 - arg1 |
| {name: "SUBL", argLength: 2, reg: gp21, asm: "SUBL", resultInArg0: true, clobberFlags: true}, // arg0 - arg1 |
| {name: "SUBQconst", argLength: 1, reg: gp11, asm: "SUBQ", aux: "Int32", resultInArg0: true, clobberFlags: true}, // arg0 - auxint |
| {name: "SUBLconst", argLength: 1, reg: gp11, asm: "SUBL", aux: "Int32", resultInArg0: true, clobberFlags: true}, // arg0 - auxint |
| |
| {name: "MULQ", argLength: 2, reg: gp21, asm: "IMULQ", commutative: true, resultInArg0: true, clobberFlags: true}, // arg0 * arg1 |
| {name: "MULL", argLength: 2, reg: gp21, asm: "IMULL", commutative: true, resultInArg0: true, clobberFlags: true}, // arg0 * arg1 |
| {name: "MULQconst", argLength: 1, reg: gp11, asm: "IMUL3Q", aux: "Int32", clobberFlags: true}, // arg0 * auxint |
| {name: "MULLconst", argLength: 1, reg: gp11, asm: "IMUL3L", aux: "Int32", clobberFlags: true}, // arg0 * auxint |
| |
| {name: "MULLU", argLength: 2, reg: regInfo{inputs: []regMask{ax, gpsp}, outputs: []regMask{ax, 0}, clobbers: dx}, typ: "(UInt32,Flags)", asm: "MULL", commutative: true, clobberFlags: true}, // Let x = arg0*arg1 (full 32x32->64 unsigned multiply). Returns uint32(x), and flags set to overflow if uint32(x) != x. |
| {name: "MULQU", argLength: 2, reg: regInfo{inputs: []regMask{ax, gpsp}, outputs: []regMask{ax, 0}, clobbers: dx}, typ: "(UInt64,Flags)", asm: "MULQ", commutative: true, clobberFlags: true}, // Let x = arg0*arg1 (full 64x64->128 unsigned multiply). Returns uint64(x), and flags set to overflow if uint64(x) != x. |
| |
| // HMULx[U] are intentionally not marked as commutative, even though they are. |
| // This is because they have asymmetric register requirements. |
| // There are rewrite rules to try to place arguments in preferable slots. |
| {name: "HMULQ", argLength: 2, reg: gp21hmul, asm: "IMULQ", clobberFlags: true}, // (arg0 * arg1) >> width |
| {name: "HMULL", argLength: 2, reg: gp21hmul, asm: "IMULL", clobberFlags: true}, // (arg0 * arg1) >> width |
| {name: "HMULQU", argLength: 2, reg: gp21hmul, asm: "MULQ", clobberFlags: true}, // (arg0 * arg1) >> width |
| {name: "HMULLU", argLength: 2, reg: gp21hmul, asm: "MULL", clobberFlags: true}, // (arg0 * arg1) >> width |
| |
| {name: "AVGQU", argLength: 2, reg: gp21, commutative: true, resultInArg0: true, clobberFlags: true}, // (arg0 + arg1) / 2 as unsigned, all 64 result bits |
| |
| // For DIVQ, DIVL and DIVW, AuxInt non-zero means that the divisor has been proved to be not -1. |
| {name: "DIVQ", argLength: 2, reg: gp11div, typ: "(Int64,Int64)", asm: "IDIVQ", aux: "Bool", clobberFlags: true}, // [arg0 / arg1, arg0 % arg1] |
| {name: "DIVL", argLength: 2, reg: gp11div, typ: "(Int32,Int32)", asm: "IDIVL", aux: "Bool", clobberFlags: true}, // [arg0 / arg1, arg0 % arg1] |
| {name: "DIVW", argLength: 2, reg: gp11div, typ: "(Int16,Int16)", asm: "IDIVW", aux: "Bool", clobberFlags: true}, // [arg0 / arg1, arg0 % arg1] |
| |
| {name: "DIVQU", argLength: 2, reg: gp11div, typ: "(UInt64,UInt64)", asm: "DIVQ", clobberFlags: true}, // [arg0 / arg1, arg0 % arg1] |
| {name: "DIVLU", argLength: 2, reg: gp11div, typ: "(UInt32,UInt32)", asm: "DIVL", clobberFlags: true}, // [arg0 / arg1, arg0 % arg1] |
| {name: "DIVWU", argLength: 2, reg: gp11div, typ: "(UInt16,UInt16)", asm: "DIVW", clobberFlags: true}, // [arg0 / arg1, arg0 % arg1] |
| |
| {name: "NEGLflags", argLength: 1, reg: gp11flags, typ: "(UInt32,Flags)", asm: "NEGL", resultInArg0: true}, // -arg0, flags set for 0-arg0. |
| // The following 4 add opcodes return the low 64 bits of the sum in the first result and |
| // the carry (the 65th bit) in the carry flag. |
| {name: "ADDQcarry", argLength: 2, reg: gp21flags, typ: "(UInt64,Flags)", asm: "ADDQ", commutative: true, resultInArg0: true}, // r = arg0+arg1 |
| {name: "ADCQ", argLength: 3, reg: gp2flags1flags, typ: "(UInt64,Flags)", asm: "ADCQ", commutative: true, resultInArg0: true}, // r = arg0+arg1+carry(arg2) |
| {name: "ADDQconstcarry", argLength: 1, reg: gp11flags, typ: "(UInt64,Flags)", asm: "ADDQ", aux: "Int32", resultInArg0: true}, // r = arg0+auxint |
| {name: "ADCQconst", argLength: 2, reg: gp1flags1flags, typ: "(UInt64,Flags)", asm: "ADCQ", aux: "Int32", resultInArg0: true}, // r = arg0+auxint+carry(arg1) |
| |
| // The following 4 add opcodes return the low 64 bits of the difference in the first result and |
| // the borrow (if the result is negative) in the carry flag. |
| {name: "SUBQborrow", argLength: 2, reg: gp21flags, typ: "(UInt64,Flags)", asm: "SUBQ", resultInArg0: true}, // r = arg0-arg1 |
| {name: "SBBQ", argLength: 3, reg: gp2flags1flags, typ: "(UInt64,Flags)", asm: "SBBQ", resultInArg0: true}, // r = arg0-(arg1+carry(arg2)) |
| {name: "SUBQconstborrow", argLength: 1, reg: gp11flags, typ: "(UInt64,Flags)", asm: "SUBQ", aux: "Int32", resultInArg0: true}, // r = arg0-auxint |
| {name: "SBBQconst", argLength: 2, reg: gp1flags1flags, typ: "(UInt64,Flags)", asm: "SBBQ", aux: "Int32", resultInArg0: true}, // r = arg0-(auxint+carry(arg1)) |
| |
| {name: "MULQU2", argLength: 2, reg: regInfo{inputs: []regMask{ax, gpsp}, outputs: []regMask{dx, ax}}, commutative: true, asm: "MULQ", clobberFlags: true}, // arg0 * arg1, returns (hi, lo) |
| {name: "DIVQU2", argLength: 3, reg: regInfo{inputs: []regMask{dx, ax, gpsp}, outputs: []regMask{ax, dx}}, asm: "DIVQ", clobberFlags: true}, // arg0:arg1 / arg2 (128-bit divided by 64-bit), returns (q, r) |
| |
| {name: "ANDQ", argLength: 2, reg: gp21, asm: "ANDQ", commutative: true, resultInArg0: true, clobberFlags: true}, // arg0 & arg1 |
| {name: "ANDL", argLength: 2, reg: gp21, asm: "ANDL", commutative: true, resultInArg0: true, clobberFlags: true}, // arg0 & arg1 |
| {name: "ANDQconst", argLength: 1, reg: gp11, asm: "ANDQ", aux: "Int32", resultInArg0: true, clobberFlags: true}, // arg0 & auxint |
| {name: "ANDLconst", argLength: 1, reg: gp11, asm: "ANDL", aux: "Int32", resultInArg0: true, clobberFlags: true}, // arg0 & auxint |
| {name: "ANDQconstmodify", argLength: 2, reg: gpstoreconst, asm: "ANDQ", aux: "SymValAndOff", clobberFlags: true, faultOnNilArg0: true, symEffect: "Read,Write"}, // and ValAndOff(AuxInt).Val() to arg0+ValAndOff(AuxInt).Off()+aux, arg1=mem |
| {name: "ANDLconstmodify", argLength: 2, reg: gpstoreconst, asm: "ANDL", aux: "SymValAndOff", clobberFlags: true, faultOnNilArg0: true, symEffect: "Read,Write"}, // and ValAndOff(AuxInt).Val() to arg0+ValAndOff(AuxInt).Off()+aux, arg1=mem |
| |
| {name: "ORQ", argLength: 2, reg: gp21, asm: "ORQ", commutative: true, resultInArg0: true, clobberFlags: true}, // arg0 | arg1 |
| {name: "ORL", argLength: 2, reg: gp21, asm: "ORL", commutative: true, resultInArg0: true, clobberFlags: true}, // arg0 | arg1 |
| {name: "ORQconst", argLength: 1, reg: gp11, asm: "ORQ", aux: "Int32", resultInArg0: true, clobberFlags: true}, // arg0 | auxint |
| {name: "ORLconst", argLength: 1, reg: gp11, asm: "ORL", aux: "Int32", resultInArg0: true, clobberFlags: true}, // arg0 | auxint |
| {name: "ORQconstmodify", argLength: 2, reg: gpstoreconst, asm: "ORQ", aux: "SymValAndOff", clobberFlags: true, faultOnNilArg0: true, symEffect: "Read,Write"}, // or ValAndOff(AuxInt).Val() to arg0+ValAndOff(AuxInt).Off()+aux, arg1=mem |
| {name: "ORLconstmodify", argLength: 2, reg: gpstoreconst, asm: "ORL", aux: "SymValAndOff", clobberFlags: true, faultOnNilArg0: true, symEffect: "Read,Write"}, // or ValAndOff(AuxInt).Val() to arg0+ValAndOff(AuxInt).Off()+aux, arg1=mem |
| |
| {name: "XORQ", argLength: 2, reg: gp21, asm: "XORQ", commutative: true, resultInArg0: true, clobberFlags: true}, // arg0 ^ arg1 |
| {name: "XORL", argLength: 2, reg: gp21, asm: "XORL", commutative: true, resultInArg0: true, clobberFlags: true}, // arg0 ^ arg1 |
| {name: "XORQconst", argLength: 1, reg: gp11, asm: "XORQ", aux: "Int32", resultInArg0: true, clobberFlags: true}, // arg0 ^ auxint |
| {name: "XORLconst", argLength: 1, reg: gp11, asm: "XORL", aux: "Int32", resultInArg0: true, clobberFlags: true}, // arg0 ^ auxint |
| {name: "XORQconstmodify", argLength: 2, reg: gpstoreconst, asm: "XORQ", aux: "SymValAndOff", clobberFlags: true, faultOnNilArg0: true, symEffect: "Read,Write"}, // xor ValAndOff(AuxInt).Val() to arg0+ValAndOff(AuxInt).Off()+aux, arg1=mem |
| {name: "XORLconstmodify", argLength: 2, reg: gpstoreconst, asm: "XORL", aux: "SymValAndOff", clobberFlags: true, faultOnNilArg0: true, symEffect: "Read,Write"}, // xor ValAndOff(AuxInt).Val() to arg0+ValAndOff(AuxInt).Off()+aux, arg1=mem |
| |
| {name: "CMPQ", argLength: 2, reg: gp2flags, asm: "CMPQ", typ: "Flags"}, // arg0 compare to arg1 |
| {name: "CMPL", argLength: 2, reg: gp2flags, asm: "CMPL", typ: "Flags"}, // arg0 compare to arg1 |
| {name: "CMPW", argLength: 2, reg: gp2flags, asm: "CMPW", typ: "Flags"}, // arg0 compare to arg1 |
| {name: "CMPB", argLength: 2, reg: gp2flags, asm: "CMPB", typ: "Flags"}, // arg0 compare to arg1 |
| {name: "CMPQconst", argLength: 1, reg: gp1flags, asm: "CMPQ", typ: "Flags", aux: "Int32"}, // arg0 compare to auxint |
| {name: "CMPLconst", argLength: 1, reg: gp1flags, asm: "CMPL", typ: "Flags", aux: "Int32"}, // arg0 compare to auxint |
| {name: "CMPWconst", argLength: 1, reg: gp1flags, asm: "CMPW", typ: "Flags", aux: "Int16"}, // arg0 compare to auxint |
| {name: "CMPBconst", argLength: 1, reg: gp1flags, asm: "CMPB", typ: "Flags", aux: "Int8"}, // arg0 compare to auxint |
| |
| // compare *(arg0+auxint+aux) to arg1 (in that order). arg2=mem. |
| {name: "CMPQload", argLength: 3, reg: gp1flagsLoad, asm: "CMPQ", aux: "SymOff", typ: "Flags", symEffect: "Read", faultOnNilArg0: true}, |
| {name: "CMPLload", argLength: 3, reg: gp1flagsLoad, asm: "CMPL", aux: "SymOff", typ: "Flags", symEffect: "Read", faultOnNilArg0: true}, |
| {name: "CMPWload", argLength: 3, reg: gp1flagsLoad, asm: "CMPW", aux: "SymOff", typ: "Flags", symEffect: "Read", faultOnNilArg0: true}, |
| {name: "CMPBload", argLength: 3, reg: gp1flagsLoad, asm: "CMPB", aux: "SymOff", typ: "Flags", symEffect: "Read", faultOnNilArg0: true}, |
| |
| // compare *(arg0+ValAndOff(AuxInt).Off()+aux) to ValAndOff(AuxInt).Val() (in that order). arg1=mem. |
| {name: "CMPQconstload", argLength: 2, reg: gp0flagsLoad, asm: "CMPQ", aux: "SymValAndOff", typ: "Flags", symEffect: "Read", faultOnNilArg0: true}, |
| {name: "CMPLconstload", argLength: 2, reg: gp0flagsLoad, asm: "CMPL", aux: "SymValAndOff", typ: "Flags", symEffect: "Read", faultOnNilArg0: true}, |
| {name: "CMPWconstload", argLength: 2, reg: gp0flagsLoad, asm: "CMPW", aux: "SymValAndOff", typ: "Flags", symEffect: "Read", faultOnNilArg0: true}, |
| {name: "CMPBconstload", argLength: 2, reg: gp0flagsLoad, asm: "CMPB", aux: "SymValAndOff", typ: "Flags", symEffect: "Read", faultOnNilArg0: true}, |
| |
| // compare *(arg0+N*arg1+auxint+aux) to arg2 (in that order). arg3=mem. |
| {name: "CMPQloadidx8", argLength: 4, reg: gp2flagsLoad, asm: "CMPQ", scale: 8, aux: "SymOff", typ: "Flags", symEffect: "Read"}, |
| {name: "CMPQloadidx1", argLength: 4, reg: gp2flagsLoad, asm: "CMPQ", scale: 1, commutative: true, aux: "SymOff", typ: "Flags", symEffect: "Read"}, |
| {name: "CMPLloadidx4", argLength: 4, reg: gp2flagsLoad, asm: "CMPL", scale: 4, aux: "SymOff", typ: "Flags", symEffect: "Read"}, |
| {name: "CMPLloadidx1", argLength: 4, reg: gp2flagsLoad, asm: "CMPL", scale: 1, commutative: true, aux: "SymOff", typ: "Flags", symEffect: "Read"}, |
| {name: "CMPWloadidx2", argLength: 4, reg: gp2flagsLoad, asm: "CMPW", scale: 2, aux: "SymOff", typ: "Flags", symEffect: "Read"}, |
| {name: "CMPWloadidx1", argLength: 4, reg: gp2flagsLoad, asm: "CMPW", scale: 1, commutative: true, aux: "SymOff", typ: "Flags", symEffect: "Read"}, |
| {name: "CMPBloadidx1", argLength: 4, reg: gp2flagsLoad, asm: "CMPB", scale: 1, commutative: true, aux: "SymOff", typ: "Flags", symEffect: "Read"}, |
| |
| // compare *(arg0+N*arg1+ValAndOff(AuxInt).Off()+aux) to ValAndOff(AuxInt).Val() (in that order). arg2=mem. |
| {name: "CMPQconstloadidx8", argLength: 3, reg: gp1flagsLoad, asm: "CMPQ", scale: 8, aux: "SymValAndOff", typ: "Flags", symEffect: "Read"}, |
| {name: "CMPQconstloadidx1", argLength: 3, reg: gp1flagsLoad, asm: "CMPQ", scale: 1, commutative: true, aux: "SymValAndOff", typ: "Flags", symEffect: "Read"}, |
| {name: "CMPLconstloadidx4", argLength: 3, reg: gp1flagsLoad, asm: "CMPL", scale: 4, aux: "SymValAndOff", typ: "Flags", symEffect: "Read"}, |
| {name: "CMPLconstloadidx1", argLength: 3, reg: gp1flagsLoad, asm: "CMPL", scale: 1, commutative: true, aux: "SymValAndOff", typ: "Flags", symEffect: "Read"}, |
| {name: "CMPWconstloadidx2", argLength: 3, reg: gp1flagsLoad, asm: "CMPW", scale: 2, aux: "SymValAndOff", typ: "Flags", symEffect: "Read"}, |
| {name: "CMPWconstloadidx1", argLength: 3, reg: gp1flagsLoad, asm: "CMPW", scale: 1, commutative: true, aux: "SymValAndOff", typ: "Flags", symEffect: "Read"}, |
| {name: "CMPBconstloadidx1", argLength: 3, reg: gp1flagsLoad, asm: "CMPB", scale: 1, commutative: true, aux: "SymValAndOff", typ: "Flags", symEffect: "Read"}, |
| |
| {name: "UCOMISS", argLength: 2, reg: fp2flags, asm: "UCOMISS", typ: "Flags"}, // arg0 compare to arg1, f32 |
| {name: "UCOMISD", argLength: 2, reg: fp2flags, asm: "UCOMISD", typ: "Flags"}, // arg0 compare to arg1, f64 |
| |
| {name: "BTL", argLength: 2, reg: gp2flags, asm: "BTL", typ: "Flags"}, // test whether bit arg0%32 in arg1 is set |
| {name: "BTQ", argLength: 2, reg: gp2flags, asm: "BTQ", typ: "Flags"}, // test whether bit arg0%64 in arg1 is set |
| {name: "BTCL", argLength: 2, reg: gp21, asm: "BTCL", resultInArg0: true, clobberFlags: true}, // complement bit arg1%32 in arg0 |
| {name: "BTCQ", argLength: 2, reg: gp21, asm: "BTCQ", resultInArg0: true, clobberFlags: true}, // complement bit arg1%64 in arg0 |
| {name: "BTRL", argLength: 2, reg: gp21, asm: "BTRL", resultInArg0: true, clobberFlags: true}, // reset bit arg1%32 in arg0 |
| {name: "BTRQ", argLength: 2, reg: gp21, asm: "BTRQ", resultInArg0: true, clobberFlags: true}, // reset bit arg1%64 in arg0 |
| {name: "BTSL", argLength: 2, reg: gp21, asm: "BTSL", resultInArg0: true, clobberFlags: true}, // set bit arg1%32 in arg0 |
| {name: "BTSQ", argLength: 2, reg: gp21, asm: "BTSQ", resultInArg0: true, clobberFlags: true}, // set bit arg1%64 in arg0 |
| {name: "BTLconst", argLength: 1, reg: gp1flags, asm: "BTL", typ: "Flags", aux: "Int8"}, // test whether bit auxint in arg0 is set, 0 <= auxint < 32 |
| {name: "BTQconst", argLength: 1, reg: gp1flags, asm: "BTQ", typ: "Flags", aux: "Int8"}, // test whether bit auxint in arg0 is set, 0 <= auxint < 64 |
| {name: "BTCLconst", argLength: 1, reg: gp11, asm: "BTCL", resultInArg0: true, clobberFlags: true, aux: "Int8"}, // complement bit auxint in arg0, 0 <= auxint < 32 |
| {name: "BTCQconst", argLength: 1, reg: gp11, asm: "BTCQ", resultInArg0: true, clobberFlags: true, aux: "Int8"}, // complement bit auxint in arg0, 0 <= auxint < 64 |
| {name: "BTRLconst", argLength: 1, reg: gp11, asm: "BTRL", resultInArg0: true, clobberFlags: true, aux: "Int8"}, // reset bit auxint in arg0, 0 <= auxint < 32 |
| {name: "BTRQconst", argLength: 1, reg: gp11, asm: "BTRQ", resultInArg0: true, clobberFlags: true, aux: "Int8"}, // reset bit auxint in arg0, 0 <= auxint < 64 |
| {name: "BTSLconst", argLength: 1, reg: gp11, asm: "BTSL", resultInArg0: true, clobberFlags: true, aux: "Int8"}, // set bit auxint in arg0, 0 <= auxint < 32 |
| {name: "BTSQconst", argLength: 1, reg: gp11, asm: "BTSQ", resultInArg0: true, clobberFlags: true, aux: "Int8"}, // set bit auxint in arg0, 0 <= auxint < 64 |
| |
| // direct bit operation on memory operand |
| {name: "BTCQmodify", argLength: 3, reg: gpstore, asm: "BTCQ", aux: "SymOff", typ: "Mem", clobberFlags: true, faultOnNilArg0: true, symEffect: "Read,Write"}, // complement bit arg1 in 64-bit arg0+auxint+aux, arg2=mem |
| {name: "BTCLmodify", argLength: 3, reg: gpstore, asm: "BTCL", aux: "SymOff", typ: "Mem", clobberFlags: true, faultOnNilArg0: true, symEffect: "Read,Write"}, // complement bit arg1 in 32-bit arg0+auxint+aux, arg2=mem |
| {name: "BTSQmodify", argLength: 3, reg: gpstore, asm: "BTSQ", aux: "SymOff", typ: "Mem", clobberFlags: true, faultOnNilArg0: true, symEffect: "Read,Write"}, // set bit arg1 in 64-bit arg0+auxint+aux, arg2=mem |
| {name: "BTSLmodify", argLength: 3, reg: gpstore, asm: "BTSL", aux: "SymOff", typ: "Mem", clobberFlags: true, faultOnNilArg0: true, symEffect: "Read,Write"}, // set bit arg1 in 32-bit arg0+auxint+aux, arg2=mem |
| {name: "BTRQmodify", argLength: 3, reg: gpstore, asm: "BTRQ", aux: "SymOff", typ: "Mem", clobberFlags: true, faultOnNilArg0: true, symEffect: "Read,Write"}, // reset bit arg1 in 64-bit arg0+auxint+aux, arg2=mem |
| {name: "BTRLmodify", argLength: 3, reg: gpstore, asm: "BTRL", aux: "SymOff", typ: "Mem", clobberFlags: true, faultOnNilArg0: true, symEffect: "Read,Write"}, // reset bit arg1 in 32-bit arg0+auxint+aux, arg2=mem |
| {name: "BTCQconstmodify", argLength: 2, reg: gpstoreconst, asm: "BTCQ", aux: "SymValAndOff", clobberFlags: true, faultOnNilArg0: true, symEffect: "Read,Write"}, // complement bit ValAndOff(AuxInt).Val() in 64-bit arg0+ValAndOff(AuxInt).Off()+aux, arg1=mem |
| {name: "BTCLconstmodify", argLength: 2, reg: gpstoreconst, asm: "BTCL", aux: "SymValAndOff", clobberFlags: true, faultOnNilArg0: true, symEffect: "Read,Write"}, // complement bit ValAndOff(AuxInt).Val() in 32-bit arg0+ValAndOff(AuxInt).Off()+aux, arg1=mem |
| {name: "BTSQconstmodify", argLength: 2, reg: gpstoreconst, asm: "BTSQ", aux: "SymValAndOff", clobberFlags: true, faultOnNilArg0: true, symEffect: "Read,Write"}, // set bit ValAndOff(AuxInt).Val() in 64-bit arg0+ValAndOff(AuxInt).Off()+aux, arg1=mem |
| {name: "BTSLconstmodify", argLength: 2, reg: gpstoreconst, asm: "BTSL", aux: "SymValAndOff", clobberFlags: true, faultOnNilArg0: true, symEffect: "Read,Write"}, // set bit ValAndOff(AuxInt).Val() in 32-bit arg0+ValAndOff(AuxInt).Off()+aux, arg1=mem |
| {name: "BTRQconstmodify", argLength: 2, reg: gpstoreconst, asm: "BTRQ", aux: "SymValAndOff", clobberFlags: true, faultOnNilArg0: true, symEffect: "Read,Write"}, // reset bit ValAndOff(AuxInt).Val() in 64-bit arg0+ValAndOff(AuxInt).Off()+aux, arg1=mem |
| {name: "BTRLconstmodify", argLength: 2, reg: gpstoreconst, asm: "BTRL", aux: "SymValAndOff", clobberFlags: true, faultOnNilArg0: true, symEffect: "Read,Write"}, // reset bit ValAndOff(AuxInt).Val() in 32-bit arg0+ValAndOff(AuxInt).Off()+aux, arg1=mem |
| |
| {name: "TESTQ", argLength: 2, reg: gp2flags, commutative: true, asm: "TESTQ", typ: "Flags"}, // (arg0 & arg1) compare to 0 |
| {name: "TESTL", argLength: 2, reg: gp2flags, commutative: true, asm: "TESTL", typ: "Flags"}, // (arg0 & arg1) compare to 0 |
| {name: "TESTW", argLength: 2, reg: gp2flags, commutative: true, asm: "TESTW", typ: "Flags"}, // (arg0 & arg1) compare to 0 |
| {name: "TESTB", argLength: 2, reg: gp2flags, commutative: true, asm: "TESTB", typ: "Flags"}, // (arg0 & arg1) compare to 0 |
| {name: "TESTQconst", argLength: 1, reg: gp1flags, asm: "TESTQ", typ: "Flags", aux: "Int32"}, // (arg0 & auxint) compare to 0 |
| {name: "TESTLconst", argLength: 1, reg: gp1flags, asm: "TESTL", typ: "Flags", aux: "Int32"}, // (arg0 & auxint) compare to 0 |
| {name: "TESTWconst", argLength: 1, reg: gp1flags, asm: "TESTW", typ: "Flags", aux: "Int16"}, // (arg0 & auxint) compare to 0 |
| {name: "TESTBconst", argLength: 1, reg: gp1flags, asm: "TESTB", typ: "Flags", aux: "Int8"}, // (arg0 & auxint) compare to 0 |
| |
| {name: "SHLQ", argLength: 2, reg: gp21shift, asm: "SHLQ", resultInArg0: true, clobberFlags: true}, // arg0 << arg1, shift amount is mod 64 |
| {name: "SHLL", argLength: 2, reg: gp21shift, asm: "SHLL", resultInArg0: true, clobberFlags: true}, // arg0 << arg1, shift amount is mod 32 |
| {name: "SHLQconst", argLength: 1, reg: gp11, asm: "SHLQ", aux: "Int8", resultInArg0: true, clobberFlags: true}, // arg0 << auxint, shift amount 0-63 |
| {name: "SHLLconst", argLength: 1, reg: gp11, asm: "SHLL", aux: "Int8", resultInArg0: true, clobberFlags: true}, // arg0 << auxint, shift amount 0-31 |
| // Note: x86 is weird, the 16 and 8 byte shifts still use all 5 bits of shift amount! |
| |
| {name: "SHRQ", argLength: 2, reg: gp21shift, asm: "SHRQ", resultInArg0: true, clobberFlags: true}, // unsigned arg0 >> arg1, shift amount is mod 64 |
| {name: "SHRL", argLength: 2, reg: gp21shift, asm: "SHRL", resultInArg0: true, clobberFlags: true}, // unsigned uint32(arg0) >> arg1, shift amount is mod 32 |
| {name: "SHRW", argLength: 2, reg: gp21shift, asm: "SHRW", resultInArg0: true, clobberFlags: true}, // unsigned uint16(arg0) >> arg1, shift amount is mod 32 |
| {name: "SHRB", argLength: 2, reg: gp21shift, asm: "SHRB", resultInArg0: true, clobberFlags: true}, // unsigned uint8(arg0) >> arg1, shift amount is mod 32 |
| {name: "SHRQconst", argLength: 1, reg: gp11, asm: "SHRQ", aux: "Int8", resultInArg0: true, clobberFlags: true}, // unsigned arg0 >> auxint, shift amount 0-63 |
| {name: "SHRLconst", argLength: 1, reg: gp11, asm: "SHRL", aux: "Int8", resultInArg0: true, clobberFlags: true}, // unsigned uint32(arg0) >> auxint, shift amount 0-31 |
| {name: "SHRWconst", argLength: 1, reg: gp11, asm: "SHRW", aux: "Int8", resultInArg0: true, clobberFlags: true}, // unsigned uint16(arg0) >> auxint, shift amount 0-15 |
| {name: "SHRBconst", argLength: 1, reg: gp11, asm: "SHRB", aux: "Int8", resultInArg0: true, clobberFlags: true}, // unsigned uint8(arg0) >> auxint, shift amount 0-7 |
| |
| {name: "SARQ", argLength: 2, reg: gp21shift, asm: "SARQ", resultInArg0: true, clobberFlags: true}, // signed arg0 >> arg1, shift amount is mod 64 |
| {name: "SARL", argLength: 2, reg: gp21shift, asm: "SARL", resultInArg0: true, clobberFlags: true}, // signed int32(arg0) >> arg1, shift amount is mod 32 |
| {name: "SARW", argLength: 2, reg: gp21shift, asm: "SARW", resultInArg0: true, clobberFlags: true}, // signed int16(arg0) >> arg1, shift amount is mod 32 |
| {name: "SARB", argLength: 2, reg: gp21shift, asm: "SARB", resultInArg0: true, clobberFlags: true}, // signed int8(arg0) >> arg1, shift amount is mod 32 |
| {name: "SARQconst", argLength: 1, reg: gp11, asm: "SARQ", aux: "Int8", resultInArg0: true, clobberFlags: true}, // signed arg0 >> auxint, shift amount 0-63 |
| {name: "SARLconst", argLength: 1, reg: gp11, asm: "SARL", aux: "Int8", resultInArg0: true, clobberFlags: true}, // signed int32(arg0) >> auxint, shift amount 0-31 |
| {name: "SARWconst", argLength: 1, reg: gp11, asm: "SARW", aux: "Int8", resultInArg0: true, clobberFlags: true}, // signed int16(arg0) >> auxint, shift amount 0-15 |
| {name: "SARBconst", argLength: 1, reg: gp11, asm: "SARB", aux: "Int8", resultInArg0: true, clobberFlags: true}, // signed int8(arg0) >> auxint, shift amount 0-7 |
| |
| {name: "ROLQ", argLength: 2, reg: gp21shift, asm: "ROLQ", resultInArg0: true, clobberFlags: true}, // arg0 rotate left arg1 bits. |
| {name: "ROLL", argLength: 2, reg: gp21shift, asm: "ROLL", resultInArg0: true, clobberFlags: true}, // arg0 rotate left arg1 bits. |
| {name: "ROLW", argLength: 2, reg: gp21shift, asm: "ROLW", resultInArg0: true, clobberFlags: true}, // arg0 rotate left arg1 bits. |
| {name: "ROLB", argLength: 2, reg: gp21shift, asm: "ROLB", resultInArg0: true, clobberFlags: true}, // arg0 rotate left arg1 bits. |
| {name: "RORQ", argLength: 2, reg: gp21shift, asm: "RORQ", resultInArg0: true, clobberFlags: true}, // arg0 rotate right arg1 bits. |
| {name: "RORL", argLength: 2, reg: gp21shift, asm: "RORL", resultInArg0: true, clobberFlags: true}, // arg0 rotate right arg1 bits. |
| {name: "RORW", argLength: 2, reg: gp21shift, asm: "RORW", resultInArg0: true, clobberFlags: true}, // arg0 rotate right arg1 bits. |
| {name: "RORB", argLength: 2, reg: gp21shift, asm: "RORB", resultInArg0: true, clobberFlags: true}, // arg0 rotate right arg1 bits. |
| {name: "ROLQconst", argLength: 1, reg: gp11, asm: "ROLQ", aux: "Int8", resultInArg0: true, clobberFlags: true}, // arg0 rotate left auxint, rotate amount 0-63 |
| {name: "ROLLconst", argLength: 1, reg: gp11, asm: "ROLL", aux: "Int8", resultInArg0: true, clobberFlags: true}, // arg0 rotate left auxint, rotate amount 0-31 |
| {name: "ROLWconst", argLength: 1, reg: gp11, asm: "ROLW", aux: "Int8", resultInArg0: true, clobberFlags: true}, // arg0 rotate left auxint, rotate amount 0-15 |
| {name: "ROLBconst", argLength: 1, reg: gp11, asm: "ROLB", aux: "Int8", resultInArg0: true, clobberFlags: true}, // arg0 rotate left auxint, rotate amount 0-7 |
| |
| {name: "ADDLload", argLength: 3, reg: gp21load, asm: "ADDL", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 + tmp, tmp loaded from arg1+auxint+aux, arg2 = mem |
| {name: "ADDQload", argLength: 3, reg: gp21load, asm: "ADDQ", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 + tmp, tmp loaded from arg1+auxint+aux, arg2 = mem |
| {name: "SUBQload", argLength: 3, reg: gp21load, asm: "SUBQ", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 - tmp, tmp loaded from arg1+auxint+aux, arg2 = mem |
| {name: "SUBLload", argLength: 3, reg: gp21load, asm: "SUBL", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 - tmp, tmp loaded from arg1+auxint+aux, arg2 = mem |
| {name: "ANDLload", argLength: 3, reg: gp21load, asm: "ANDL", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 & tmp, tmp loaded from arg1+auxint+aux, arg2 = mem |
| {name: "ANDQload", argLength: 3, reg: gp21load, asm: "ANDQ", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 & tmp, tmp loaded from arg1+auxint+aux, arg2 = mem |
| {name: "ORQload", argLength: 3, reg: gp21load, asm: "ORQ", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 | tmp, tmp loaded from arg1+auxint+aux, arg2 = mem |
| {name: "ORLload", argLength: 3, reg: gp21load, asm: "ORL", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 | tmp, tmp loaded from arg1+auxint+aux, arg2 = mem |
| {name: "XORQload", argLength: 3, reg: gp21load, asm: "XORQ", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 ^ tmp, tmp loaded from arg1+auxint+aux, arg2 = mem |
| {name: "XORLload", argLength: 3, reg: gp21load, asm: "XORL", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 ^ tmp, tmp loaded from arg1+auxint+aux, arg2 = mem |
| |
| {name: "ADDLloadidx1", argLength: 4, reg: gp21loadidx, asm: "ADDL", scale: 1, aux: "SymOff", resultInArg0: true, clobberFlags: true, symEffect: "Read"}, // arg0 + tmp, tmp loaded from arg1+ arg2+auxint+aux, arg3 = mem |
| {name: "ADDLloadidx4", argLength: 4, reg: gp21loadidx, asm: "ADDL", scale: 4, aux: "SymOff", resultInArg0: true, clobberFlags: true, symEffect: "Read"}, // arg0 + tmp, tmp loaded from arg1+4*arg2+auxint+aux, arg3 = mem |
| {name: "ADDLloadidx8", argLength: 4, reg: gp21loadidx, asm: "ADDL", scale: 8, aux: "SymOff", resultInArg0: true, clobberFlags: true, symEffect: "Read"}, // arg0 + tmp, tmp loaded from arg1+8*arg2+auxint+aux, arg3 = mem |
| {name: "ADDQloadidx1", argLength: 4, reg: gp21loadidx, asm: "ADDQ", scale: 1, aux: "SymOff", resultInArg0: true, clobberFlags: true, symEffect: "Read"}, // arg0 + tmp, tmp loaded from arg1+ arg2+auxint+aux, arg3 = mem |
| {name: "ADDQloadidx8", argLength: 4, reg: gp21loadidx, asm: "ADDQ", scale: 8, aux: "SymOff", resultInArg0: true, clobberFlags: true, symEffect: "Read"}, // arg0 + tmp, tmp loaded from arg1+8*arg2+auxint+aux, arg3 = mem |
| {name: "SUBLloadidx1", argLength: 4, reg: gp21loadidx, asm: "SUBL", scale: 1, aux: "SymOff", resultInArg0: true, clobberFlags: true, symEffect: "Read"}, // arg0 - tmp, tmp loaded from arg1+ arg2+auxint+aux, arg3 = mem |
| {name: "SUBLloadidx4", argLength: 4, reg: gp21loadidx, asm: "SUBL", scale: 4, aux: "SymOff", resultInArg0: true, clobberFlags: true, symEffect: "Read"}, // arg0 - tmp, tmp loaded from arg1+4*arg2+auxint+aux, arg3 = mem |
| {name: "SUBLloadidx8", argLength: 4, reg: gp21loadidx, asm: "SUBL", scale: 8, aux: "SymOff", resultInArg0: true, clobberFlags: true, symEffect: "Read"}, // arg0 - tmp, tmp loaded from arg1+8*arg2+auxint+aux, arg3 = mem |
| {name: "SUBQloadidx1", argLength: 4, reg: gp21loadidx, asm: "SUBQ", scale: 1, aux: "SymOff", resultInArg0: true, clobberFlags: true, symEffect: "Read"}, // arg0 - tmp, tmp loaded from arg1+ arg2+auxint+aux, arg3 = mem |
| {name: "SUBQloadidx8", argLength: 4, reg: gp21loadidx, asm: "SUBQ", scale: 8, aux: "SymOff", resultInArg0: true, clobberFlags: true, symEffect: "Read"}, // arg0 - tmp, tmp loaded from arg1+8*arg2+auxint+aux, arg3 = mem |
| {name: "ANDLloadidx1", argLength: 4, reg: gp21loadidx, asm: "ANDL", scale: 1, aux: "SymOff", resultInArg0: true, clobberFlags: true, symEffect: "Read"}, // arg0 & tmp, tmp loaded from arg1+ arg2+auxint+aux, arg3 = mem |
| {name: "ANDLloadidx4", argLength: 4, reg: gp21loadidx, asm: "ANDL", scale: 4, aux: "SymOff", resultInArg0: true, clobberFlags: true, symEffect: "Read"}, // arg0 & tmp, tmp loaded from arg1+4*arg2+auxint+aux, arg3 = mem |
| {name: "ANDLloadidx8", argLength: 4, reg: gp21loadidx, asm: "ANDL", scale: 8, aux: "SymOff", resultInArg0: true, clobberFlags: true, symEffect: "Read"}, // arg0 & tmp, tmp loaded from arg1+8*arg2+auxint+aux, arg3 = mem |
| {name: "ANDQloadidx1", argLength: 4, reg: gp21loadidx, asm: "ANDQ", scale: 1, aux: "SymOff", resultInArg0: true, clobberFlags: true, symEffect: "Read"}, // arg0 & tmp, tmp loaded from arg1+ arg2+auxint+aux, arg3 = mem |
| {name: "ANDQloadidx8", argLength: 4, reg: gp21loadidx, asm: "ANDQ", scale: 8, aux: "SymOff", resultInArg0: true, clobberFlags: true, symEffect: "Read"}, // arg0 & tmp, tmp loaded from arg1+8*arg2+auxint+aux, arg3 = mem |
| {name: "ORLloadidx1", argLength: 4, reg: gp21loadidx, asm: "ORL", scale: 1, aux: "SymOff", resultInArg0: true, clobberFlags: true, symEffect: "Read"}, // arg0 | tmp, tmp loaded from arg1+ arg2+auxint+aux, arg3 = mem |
| {name: "ORLloadidx4", argLength: 4, reg: gp21loadidx, asm: "ORL", scale: 4, aux: "SymOff", resultInArg0: true, clobberFlags: true, symEffect: "Read"}, // arg0 | tmp, tmp loaded from arg1+4*arg2+auxint+aux, arg3 = mem |
| {name: "ORLloadidx8", argLength: 4, reg: gp21loadidx, asm: "ORL", scale: 8, aux: "SymOff", resultInArg0: true, clobberFlags: true, symEffect: "Read"}, // arg0 | tmp, tmp loaded from arg1+8*arg2+auxint+aux, arg3 = mem |
| {name: "ORQloadidx1", argLength: 4, reg: gp21loadidx, asm: "ORQ", scale: 1, aux: "SymOff", resultInArg0: true, clobberFlags: true, symEffect: "Read"}, // arg0 | tmp, tmp loaded from arg1+ arg2+auxint+aux, arg3 = mem |
| {name: "ORQloadidx8", argLength: 4, reg: gp21loadidx, asm: "ORQ", scale: 8, aux: "SymOff", resultInArg0: true, clobberFlags: true, symEffect: "Read"}, // arg0 | tmp, tmp loaded from arg1+8*arg2+auxint+aux, arg3 = mem |
| {name: "XORLloadidx1", argLength: 4, reg: gp21loadidx, asm: "XORL", scale: 1, aux: "SymOff", resultInArg0: true, clobberFlags: true, symEffect: "Read"}, // arg0 ^ tmp, tmp loaded from arg1+ arg2+auxint+aux, arg3 = mem |
| {name: "XORLloadidx4", argLength: 4, reg: gp21loadidx, asm: "XORL", scale: 4, aux: "SymOff", resultInArg0: true, clobberFlags: true, symEffect: "Read"}, // arg0 ^ tmp, tmp loaded from arg1+4*arg2+auxint+aux, arg3 = mem |
| {name: "XORLloadidx8", argLength: 4, reg: gp21loadidx, asm: "XORL", scale: 8, aux: "SymOff", resultInArg0: true, clobberFlags: true, symEffect: "Read"}, // arg0 ^ tmp, tmp loaded from arg1+8*arg2+auxint+aux, arg3 = mem |
| {name: "XORQloadidx1", argLength: 4, reg: gp21loadidx, asm: "XORQ", scale: 1, aux: "SymOff", resultInArg0: true, clobberFlags: true, symEffect: "Read"}, // arg0 ^ tmp, tmp loaded from arg1+ arg2+auxint+aux, arg3 = mem |
| {name: "XORQloadidx8", argLength: 4, reg: gp21loadidx, asm: "XORQ", scale: 8, aux: "SymOff", resultInArg0: true, clobberFlags: true, symEffect: "Read"}, // arg0 ^ tmp, tmp loaded from arg1+8*arg2+auxint+aux, arg3 = mem |
| |
| // direct binary-op on memory (read-modify-write) |
| {name: "ADDQmodify", argLength: 3, reg: gpstore, asm: "ADDQ", aux: "SymOff", typ: "Mem", clobberFlags: true, faultOnNilArg0: true, symEffect: "Read,Write"}, // *(arg0+auxint+aux) += arg1, arg2=mem |
| {name: "SUBQmodify", argLength: 3, reg: gpstore, asm: "SUBQ", aux: "SymOff", typ: "Mem", clobberFlags: true, faultOnNilArg0: true, symEffect: "Read,Write"}, // *(arg0+auxint+aux) -= arg1, arg2=mem |
| {name: "ANDQmodify", argLength: 3, reg: gpstore, asm: "ANDQ", aux: "SymOff", typ: "Mem", clobberFlags: true, faultOnNilArg0: true, symEffect: "Read,Write"}, // *(arg0+auxint+aux) &= arg1, arg2=mem |
| {name: "ORQmodify", argLength: 3, reg: gpstore, asm: "ORQ", aux: "SymOff", typ: "Mem", clobberFlags: true, faultOnNilArg0: true, symEffect: "Read,Write"}, // *(arg0+auxint+aux) |= arg1, arg2=mem |
| {name: "XORQmodify", argLength: 3, reg: gpstore, asm: "XORQ", aux: "SymOff", typ: "Mem", clobberFlags: true, faultOnNilArg0: true, symEffect: "Read,Write"}, // *(arg0+auxint+aux) ^= arg1, arg2=mem |
| {name: "ADDLmodify", argLength: 3, reg: gpstore, asm: "ADDL", aux: "SymOff", typ: "Mem", clobberFlags: true, faultOnNilArg0: true, symEffect: "Read,Write"}, // *(arg0+auxint+aux) += arg1, arg2=mem |
| {name: "SUBLmodify", argLength: 3, reg: gpstore, asm: "SUBL", aux: "SymOff", typ: "Mem", clobberFlags: true, faultOnNilArg0: true, symEffect: "Read,Write"}, // *(arg0+auxint+aux) -= arg1, arg2=mem |
| {name: "ANDLmodify", argLength: 3, reg: gpstore, asm: "ANDL", aux: "SymOff", typ: "Mem", clobberFlags: true, faultOnNilArg0: true, symEffect: "Read,Write"}, // *(arg0+auxint+aux) &= arg1, arg2=mem |
| {name: "ORLmodify", argLength: 3, reg: gpstore, asm: "ORL", aux: "SymOff", typ: "Mem", clobberFlags: true, faultOnNilArg0: true, symEffect: "Read,Write"}, // *(arg0+auxint+aux) |= arg1, arg2=mem |
| {name: "XORLmodify", argLength: 3, reg: gpstore, asm: "XORL", aux: "SymOff", typ: "Mem", clobberFlags: true, faultOnNilArg0: true, symEffect: "Read,Write"}, // *(arg0+auxint+aux) ^= arg1, arg2=mem |
| |
| {name: "ADDQmodifyidx1", argLength: 4, reg: gpstoreidx, asm: "ADDQ", scale: 1, aux: "SymOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+1*arg1+auxint+aux) += arg2, arg3=mem |
| {name: "ADDQmodifyidx8", argLength: 4, reg: gpstoreidx, asm: "ADDQ", scale: 8, aux: "SymOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+8*arg1+auxint+aux) += arg2, arg3=mem |
| {name: "SUBQmodifyidx1", argLength: 4, reg: gpstoreidx, asm: "SUBQ", scale: 1, aux: "SymOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+1*arg1+auxint+aux) -= arg2, arg3=mem |
| {name: "SUBQmodifyidx8", argLength: 4, reg: gpstoreidx, asm: "SUBQ", scale: 8, aux: "SymOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+8*arg1+auxint+aux) -= arg2, arg3=mem |
| {name: "ANDQmodifyidx1", argLength: 4, reg: gpstoreidx, asm: "ANDQ", scale: 1, aux: "SymOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+1*arg1+auxint+aux) &= arg2, arg3=mem |
| {name: "ANDQmodifyidx8", argLength: 4, reg: gpstoreidx, asm: "ANDQ", scale: 8, aux: "SymOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+8*arg1+auxint+aux) &= arg2, arg3=mem |
| {name: "ORQmodifyidx1", argLength: 4, reg: gpstoreidx, asm: "ORQ", scale: 1, aux: "SymOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+1*arg1+auxint+aux) |= arg2, arg3=mem |
| {name: "ORQmodifyidx8", argLength: 4, reg: gpstoreidx, asm: "ORQ", scale: 8, aux: "SymOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+8*arg1+auxint+aux) |= arg2, arg3=mem |
| {name: "XORQmodifyidx1", argLength: 4, reg: gpstoreidx, asm: "XORQ", scale: 1, aux: "SymOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+1*arg1+auxint+aux) ^= arg2, arg3=mem |
| {name: "XORQmodifyidx8", argLength: 4, reg: gpstoreidx, asm: "XORQ", scale: 8, aux: "SymOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+8*arg1+auxint+aux) ^= arg2, arg3=mem |
| {name: "ADDLmodifyidx1", argLength: 4, reg: gpstoreidx, asm: "ADDL", scale: 1, aux: "SymOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+1*arg1+auxint+aux) += arg2, arg3=mem |
| {name: "ADDLmodifyidx4", argLength: 4, reg: gpstoreidx, asm: "ADDL", scale: 4, aux: "SymOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+4*arg1+auxint+aux) += arg2, arg3=mem |
| {name: "ADDLmodifyidx8", argLength: 4, reg: gpstoreidx, asm: "ADDL", scale: 8, aux: "SymOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+8*arg1+auxint+aux) += arg2, arg3=mem |
| {name: "SUBLmodifyidx1", argLength: 4, reg: gpstoreidx, asm: "SUBL", scale: 1, aux: "SymOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+1*arg1+auxint+aux) -= arg2, arg3=mem |
| {name: "SUBLmodifyidx4", argLength: 4, reg: gpstoreidx, asm: "SUBL", scale: 4, aux: "SymOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+4*arg1+auxint+aux) -= arg2, arg3=mem |
| {name: "SUBLmodifyidx8", argLength: 4, reg: gpstoreidx, asm: "SUBL", scale: 8, aux: "SymOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+8*arg1+auxint+aux) -= arg2, arg3=mem |
| {name: "ANDLmodifyidx1", argLength: 4, reg: gpstoreidx, asm: "ANDL", scale: 1, aux: "SymOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+1*arg1+auxint+aux) &= arg2, arg3=mem |
| {name: "ANDLmodifyidx4", argLength: 4, reg: gpstoreidx, asm: "ANDL", scale: 4, aux: "SymOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+4*arg1+auxint+aux) &= arg2, arg3=mem |
| {name: "ANDLmodifyidx8", argLength: 4, reg: gpstoreidx, asm: "ANDL", scale: 8, aux: "SymOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+8*arg1+auxint+aux) &= arg2, arg3=mem |
| {name: "ORLmodifyidx1", argLength: 4, reg: gpstoreidx, asm: "ORL", scale: 1, aux: "SymOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+1*arg1+auxint+aux) |= arg2, arg3=mem |
| {name: "ORLmodifyidx4", argLength: 4, reg: gpstoreidx, asm: "ORL", scale: 4, aux: "SymOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+4*arg1+auxint+aux) |= arg2, arg3=mem |
| {name: "ORLmodifyidx8", argLength: 4, reg: gpstoreidx, asm: "ORL", scale: 8, aux: "SymOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+8*arg1+auxint+aux) |= arg2, arg3=mem |
| {name: "XORLmodifyidx1", argLength: 4, reg: gpstoreidx, asm: "XORL", scale: 1, aux: "SymOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+1*arg1+auxint+aux) ^= arg2, arg3=mem |
| {name: "XORLmodifyidx4", argLength: 4, reg: gpstoreidx, asm: "XORL", scale: 4, aux: "SymOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+4*arg1+auxint+aux) ^= arg2, arg3=mem |
| {name: "XORLmodifyidx8", argLength: 4, reg: gpstoreidx, asm: "XORL", scale: 8, aux: "SymOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+8*arg1+auxint+aux) ^= arg2, arg3=mem |
| |
| {name: "ADDQconstmodifyidx1", argLength: 3, reg: gpstoreconstidx, asm: "ADDQ", scale: 1, aux: "SymValAndOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+1*arg1+ValAndOff(AuxInt).Off()+aux) += ValAndOff(AuxInt).Val(), arg2=mem |
| {name: "ADDQconstmodifyidx8", argLength: 3, reg: gpstoreconstidx, asm: "ADDQ", scale: 8, aux: "SymValAndOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+8*arg1+ValAndOff(AuxInt).Off()+aux) += ValAndOff(AuxInt).Val(), arg2=mem |
| {name: "ANDQconstmodifyidx1", argLength: 3, reg: gpstoreconstidx, asm: "ANDQ", scale: 1, aux: "SymValAndOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+1*arg1+ValAndOff(AuxInt).Off()+aux) &= ValAndOff(AuxInt).Val(), arg2=mem |
| {name: "ANDQconstmodifyidx8", argLength: 3, reg: gpstoreconstidx, asm: "ANDQ", scale: 8, aux: "SymValAndOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+8*arg1+ValAndOff(AuxInt).Off()+aux) &= ValAndOff(AuxInt).Val(), arg2=mem |
| {name: "ORQconstmodifyidx1", argLength: 3, reg: gpstoreconstidx, asm: "ORQ", scale: 1, aux: "SymValAndOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+1*arg1+ValAndOff(AuxInt).Off()+aux) |= ValAndOff(AuxInt).Val(), arg2=mem |
| {name: "ORQconstmodifyidx8", argLength: 3, reg: gpstoreconstidx, asm: "ORQ", scale: 8, aux: "SymValAndOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+8*arg1+ValAndOff(AuxInt).Off()+aux) |= ValAndOff(AuxInt).Val(), arg2=mem |
| {name: "XORQconstmodifyidx1", argLength: 3, reg: gpstoreconstidx, asm: "XORQ", scale: 1, aux: "SymValAndOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+1*arg1+ValAndOff(AuxInt).Off()+aux) ^= ValAndOff(AuxInt).Val(), arg2=mem |
| {name: "XORQconstmodifyidx8", argLength: 3, reg: gpstoreconstidx, asm: "XORQ", scale: 8, aux: "SymValAndOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+8*arg1+ValAndOff(AuxInt).Off()+aux) ^= ValAndOff(AuxInt).Val(), arg2=mem |
| {name: "ADDLconstmodifyidx1", argLength: 3, reg: gpstoreconstidx, asm: "ADDL", scale: 1, aux: "SymValAndOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+1*arg1+ValAndOff(AuxInt).Off()+aux) += ValAndOff(AuxInt).Val(), arg2=mem |
| {name: "ADDLconstmodifyidx4", argLength: 3, reg: gpstoreconstidx, asm: "ADDL", scale: 4, aux: "SymValAndOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+4*arg1+ValAndOff(AuxInt).Off()+aux) += ValAndOff(AuxInt).Val(), arg2=mem |
| {name: "ADDLconstmodifyidx8", argLength: 3, reg: gpstoreconstidx, asm: "ADDL", scale: 8, aux: "SymValAndOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+8*arg1+ValAndOff(AuxInt).Off()+aux) += ValAndOff(AuxInt).Val(), arg2=mem |
| {name: "ANDLconstmodifyidx1", argLength: 3, reg: gpstoreconstidx, asm: "ANDL", scale: 1, aux: "SymValAndOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+1*arg1+ValAndOff(AuxInt).Off()+aux) &= ValAndOff(AuxInt).Val(), arg2=mem |
| {name: "ANDLconstmodifyidx4", argLength: 3, reg: gpstoreconstidx, asm: "ANDL", scale: 4, aux: "SymValAndOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+4*arg1+ValAndOff(AuxInt).Off()+aux) &= ValAndOff(AuxInt).Val(), arg2=mem |
| {name: "ANDLconstmodifyidx8", argLength: 3, reg: gpstoreconstidx, asm: "ANDL", scale: 8, aux: "SymValAndOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+8*arg1+ValAndOff(AuxInt).Off()+aux) &= ValAndOff(AuxInt).Val(), arg2=mem |
| {name: "ORLconstmodifyidx1", argLength: 3, reg: gpstoreconstidx, asm: "ORL", scale: 1, aux: "SymValAndOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+1*arg1+ValAndOff(AuxInt).Off()+aux) |= ValAndOff(AuxInt).Val(), arg2=mem |
| {name: "ORLconstmodifyidx4", argLength: 3, reg: gpstoreconstidx, asm: "ORL", scale: 4, aux: "SymValAndOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+4*arg1+ValAndOff(AuxInt).Off()+aux) |= ValAndOff(AuxInt).Val(), arg2=mem |
| {name: "ORLconstmodifyidx8", argLength: 3, reg: gpstoreconstidx, asm: "ORL", scale: 8, aux: "SymValAndOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+8*arg1+ValAndOff(AuxInt).Off()+aux) |= ValAndOff(AuxInt).Val(), arg2=mem |
| {name: "XORLconstmodifyidx1", argLength: 3, reg: gpstoreconstidx, asm: "XORL", scale: 1, aux: "SymValAndOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+1*arg1+ValAndOff(AuxInt).Off()+aux) ^= ValAndOff(AuxInt).Val(), arg2=mem |
| {name: "XORLconstmodifyidx4", argLength: 3, reg: gpstoreconstidx, asm: "XORL", scale: 4, aux: "SymValAndOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+4*arg1+ValAndOff(AuxInt).Off()+aux) ^= ValAndOff(AuxInt).Val(), arg2=mem |
| {name: "XORLconstmodifyidx8", argLength: 3, reg: gpstoreconstidx, asm: "XORL", scale: 8, aux: "SymValAndOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+8*arg1+ValAndOff(AuxInt).Off()+aux) ^= ValAndOff(AuxInt).Val(), arg2=mem |
| |
| // unary ops |
| {name: "NEGQ", argLength: 1, reg: gp11, asm: "NEGQ", resultInArg0: true, clobberFlags: true}, // -arg0 |
| {name: "NEGL", argLength: 1, reg: gp11, asm: "NEGL", resultInArg0: true, clobberFlags: true}, // -arg0 |
| |
| {name: "NOTQ", argLength: 1, reg: gp11, asm: "NOTQ", resultInArg0: true, clobberFlags: true}, // ^arg0 |
| {name: "NOTL", argLength: 1, reg: gp11, asm: "NOTL", resultInArg0: true, clobberFlags: true}, // ^arg0 |
| |
| // BS{F,R}Q returns a tuple [result, flags] |
| // result is undefined if the input is zero. |
| // flags are set to "equal" if the input is zero, "not equal" otherwise. |
| // BS{F,R}L returns only the result. |
| {name: "BSFQ", argLength: 1, reg: gp11flags, asm: "BSFQ", typ: "(UInt64,Flags)"}, // # of low-order zeroes in 64-bit arg |
| {name: "BSFL", argLength: 1, reg: gp11, asm: "BSFL", typ: "UInt32", clobberFlags: true}, // # of low-order zeroes in 32-bit arg |
| {name: "BSRQ", argLength: 1, reg: gp11flags, asm: "BSRQ", typ: "(UInt64,Flags)"}, // # of high-order zeroes in 64-bit arg |
| {name: "BSRL", argLength: 1, reg: gp11, asm: "BSRL", typ: "UInt32", clobberFlags: true}, // # of high-order zeroes in 32-bit arg |
| |
| // CMOV instructions: 64, 32 and 16-bit sizes. |
| // if arg2 encodes a true result, return arg1, else arg0 |
| {name: "CMOVQEQ", argLength: 3, reg: gp21, asm: "CMOVQEQ", resultInArg0: true}, |
| {name: "CMOVQNE", argLength: 3, reg: gp21, asm: "CMOVQNE", resultInArg0: true}, |
| {name: "CMOVQLT", argLength: 3, reg: gp21, asm: "CMOVQLT", resultInArg0: true}, |
| {name: "CMOVQGT", argLength: 3, reg: gp21, asm: "CMOVQGT", resultInArg0: true}, |
| {name: "CMOVQLE", argLength: 3, reg: gp21, asm: "CMOVQLE", resultInArg0: true}, |
| {name: "CMOVQGE", argLength: 3, reg: gp21, asm: "CMOVQGE", resultInArg0: true}, |
| {name: "CMOVQLS", argLength: 3, reg: gp21, asm: "CMOVQLS", resultInArg0: true}, |
| {name: "CMOVQHI", argLength: 3, reg: gp21, asm: "CMOVQHI", resultInArg0: true}, |
| {name: "CMOVQCC", argLength: 3, reg: gp21, asm: "CMOVQCC", resultInArg0: true}, |
| {name: "CMOVQCS", argLength: 3, reg: gp21, asm: "CMOVQCS", resultInArg0: true}, |
| |
| {name: "CMOVLEQ", argLength: 3, reg: gp21, asm: "CMOVLEQ", resultInArg0: true}, |
| {name: "CMOVLNE", argLength: 3, reg: gp21, asm: "CMOVLNE", resultInArg0: true}, |
| {name: "CMOVLLT", argLength: 3, reg: gp21, asm: "CMOVLLT", resultInArg0: true}, |
| {name: "CMOVLGT", argLength: 3, reg: gp21, asm: "CMOVLGT", resultInArg0: true}, |
| {name: "CMOVLLE", argLength: 3, reg: gp21, asm: "CMOVLLE", resultInArg0: true}, |
| {name: "CMOVLGE", argLength: 3, reg: gp21, asm: "CMOVLGE", resultInArg0: true}, |
| {name: "CMOVLLS", argLength: 3, reg: gp21, asm: "CMOVLLS", resultInArg0: true}, |
| {name: "CMOVLHI", argLength: 3, reg: gp21, asm: "CMOVLHI", resultInArg0: true}, |
| {name: "CMOVLCC", argLength: 3, reg: gp21, asm: "CMOVLCC", resultInArg0: true}, |
| {name: "CMOVLCS", argLength: 3, reg: gp21, asm: "CMOVLCS", resultInArg0: true}, |
| |
| {name: "CMOVWEQ", argLength: 3, reg: gp21, asm: "CMOVWEQ", resultInArg0: true}, |
| {name: "CMOVWNE", argLength: 3, reg: gp21, asm: "CMOVWNE", resultInArg0: true}, |
| {name: "CMOVWLT", argLength: 3, reg: gp21, asm: "CMOVWLT", resultInArg0: true}, |
| {name: "CMOVWGT", argLength: 3, reg: gp21, asm: "CMOVWGT", resultInArg0: true}, |
| {name: "CMOVWLE", argLength: 3, reg: gp21, asm: "CMOVWLE", resultInArg0: true}, |
| {name: "CMOVWGE", argLength: 3, reg: gp21, asm: "CMOVWGE", resultInArg0: true}, |
| {name: "CMOVWLS", argLength: 3, reg: gp21, asm: "CMOVWLS", resultInArg0: true}, |
| {name: "CMOVWHI", argLength: 3, reg: gp21, asm: "CMOVWHI", resultInArg0: true}, |
| {name: "CMOVWCC", argLength: 3, reg: gp21, asm: "CMOVWCC", resultInArg0: true}, |
| {name: "CMOVWCS", argLength: 3, reg: gp21, asm: "CMOVWCS", resultInArg0: true}, |
| |
| // CMOV with floating point instructions. We need separate pseudo-op to handle |
| // InvertFlags correctly, and to generate special code that handles NaN (unordered flag). |
| // NOTE: the fact that CMOV*EQF here is marked to generate CMOV*NE is not a bug. See |
| // code generation in amd64/ssa.go. |
| {name: "CMOVQEQF", argLength: 3, reg: gp21pax, asm: "CMOVQNE", resultInArg0: true}, |
| {name: "CMOVQNEF", argLength: 3, reg: gp21, asm: "CMOVQNE", resultInArg0: true}, |
| {name: "CMOVQGTF", argLength: 3, reg: gp21, asm: "CMOVQHI", resultInArg0: true}, |
| {name: "CMOVQGEF", argLength: 3, reg: gp21, asm: "CMOVQCC", resultInArg0: true}, |
| {name: "CMOVLEQF", argLength: 3, reg: gp21pax, asm: "CMOVLNE", resultInArg0: true}, |
| {name: "CMOVLNEF", argLength: 3, reg: gp21, asm: "CMOVLNE", resultInArg0: true}, |
| {name: "CMOVLGTF", argLength: 3, reg: gp21, asm: "CMOVLHI", resultInArg0: true}, |
| {name: "CMOVLGEF", argLength: 3, reg: gp21, asm: "CMOVLCC", resultInArg0: true}, |
| {name: "CMOVWEQF", argLength: 3, reg: gp21pax, asm: "CMOVWNE", resultInArg0: true}, |
| {name: "CMOVWNEF", argLength: 3, reg: gp21, asm: "CMOVWNE", resultInArg0: true}, |
| {name: "CMOVWGTF", argLength: 3, reg: gp21, asm: "CMOVWHI", resultInArg0: true}, |
| {name: "CMOVWGEF", argLength: 3, reg: gp21, asm: "CMOVWCC", resultInArg0: true}, |
| |
| {name: "BSWAPQ", argLength: 1, reg: gp11, asm: "BSWAPQ", resultInArg0: true, clobberFlags: true}, // arg0 swap bytes |
| {name: "BSWAPL", argLength: 1, reg: gp11, asm: "BSWAPL", resultInArg0: true, clobberFlags: true}, // arg0 swap bytes |
| |
| // POPCNT instructions aren't guaranteed to be on the target platform (they are SSE4). |
| // Any use must be preceded by a successful check of runtime.x86HasPOPCNT. |
| {name: "POPCNTQ", argLength: 1, reg: gp11, asm: "POPCNTQ", clobberFlags: true}, // count number of set bits in arg0 |
| {name: "POPCNTL", argLength: 1, reg: gp11, asm: "POPCNTL", clobberFlags: true}, // count number of set bits in arg0 |
| |
| {name: "SQRTSD", argLength: 1, reg: fp11, asm: "SQRTSD"}, // sqrt(arg0) |
| |
| // ROUNDSD instruction isn't guaranteed to be on the target platform (it is SSE4.1) |
| // Any use must be preceded by a successful check of runtime.x86HasSSE41. |
| {name: "ROUNDSD", argLength: 1, reg: fp11, aux: "Int8", asm: "ROUNDSD"}, // rounds arg0 depending on auxint, 1 means math.Floor, 2 Ceil, 3 Trunc |
| |
| // VFMADD231SD only exists on platforms with the FMA3 instruction set. |
| // Any use must be preceded by a successful check of runtime.support_fma. |
| {name: "VFMADD231SD", argLength: 3, reg: fp31, resultInArg0: true, asm: "VFMADD231SD"}, |
| |
| {name: "SBBQcarrymask", argLength: 1, reg: flagsgp, asm: "SBBQ"}, // (int64)(-1) if carry is set, 0 if carry is clear. |
| {name: "SBBLcarrymask", argLength: 1, reg: flagsgp, asm: "SBBL"}, // (int32)(-1) if carry is set, 0 if carry is clear. |
| // Note: SBBW and SBBB are subsumed by SBBL |
| |
| {name: "SETEQ", argLength: 1, reg: readflags, asm: "SETEQ"}, // extract == condition from arg0 |
| {name: "SETNE", argLength: 1, reg: readflags, asm: "SETNE"}, // extract != condition from arg0 |
| {name: "SETL", argLength: 1, reg: readflags, asm: "SETLT"}, // extract signed < condition from arg0 |
| {name: "SETLE", argLength: 1, reg: readflags, asm: "SETLE"}, // extract signed <= condition from arg0 |
| {name: "SETG", argLength: 1, reg: readflags, asm: "SETGT"}, // extract signed > condition from arg0 |
| {name: "SETGE", argLength: 1, reg: readflags, asm: "SETGE"}, // extract signed >= condition from arg0 |
| {name: "SETB", argLength: 1, reg: readflags, asm: "SETCS"}, // extract unsigned < condition from arg0 |
| {name: "SETBE", argLength: 1, reg: readflags, asm: "SETLS"}, // extract unsigned <= condition from arg0 |
| {name: "SETA", argLength: 1, reg: readflags, asm: "SETHI"}, // extract unsigned > condition from arg0 |
| {name: "SETAE", argLength: 1, reg: readflags, asm: "SETCC"}, // extract unsigned >= condition from arg0 |
| {name: "SETO", argLength: 1, reg: readflags, asm: "SETOS"}, // extract if overflow flag is set from arg0 |
| // Variants that store result to memory |
| {name: "SETEQstore", argLength: 3, reg: gpstoreconst, asm: "SETEQ", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // extract == condition from arg1 to arg0+auxint+aux, arg2=mem |
| {name: "SETNEstore", argLength: 3, reg: gpstoreconst, asm: "SETNE", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // extract != condition from arg1 to arg0+auxint+aux, arg2=mem |
| {name: "SETLstore", argLength: 3, reg: gpstoreconst, asm: "SETLT", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // extract signed < condition from arg1 to arg0+auxint+aux, arg2=mem |
| {name: "SETLEstore", argLength: 3, reg: gpstoreconst, asm: "SETLE", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // extract signed <= condition from arg1 to arg0+auxint+aux, arg2=mem |
| {name: "SETGstore", argLength: 3, reg: gpstoreconst, asm: "SETGT", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // extract signed > condition from arg1 to arg0+auxint+aux, arg2=mem |
| {name: "SETGEstore", argLength: 3, reg: gpstoreconst, asm: "SETGE", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // extract signed >= condition from arg1 to arg0+auxint+aux, arg2=mem |
| {name: "SETBstore", argLength: 3, reg: gpstoreconst, asm: "SETCS", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // extract unsigned < condition from arg1 to arg0+auxint+aux, arg2=mem |
| {name: "SETBEstore", argLength: 3, reg: gpstoreconst, asm: "SETLS", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // extract unsigned <= condition from arg1 to arg0+auxint+aux, arg2=mem |
| {name: "SETAstore", argLength: 3, reg: gpstoreconst, asm: "SETHI", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // extract unsigned > condition from arg1 to arg0+auxint+aux, arg2=mem |
| {name: "SETAEstore", argLength: 3, reg: gpstoreconst, asm: "SETCC", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // extract unsigned >= condition from arg1 to arg0+auxint+aux, arg2=mem |
| // Need different opcodes for floating point conditions because |
| // any comparison involving a NaN is always FALSE and thus |
| // the patterns for inverting conditions cannot be used. |
| {name: "SETEQF", argLength: 1, reg: flagsgpax, asm: "SETEQ", clobberFlags: true}, // extract == condition from arg0 |
| {name: "SETNEF", argLength: 1, reg: flagsgpax, asm: "SETNE", clobberFlags: true}, // extract != condition from arg0 |
| {name: "SETORD", argLength: 1, reg: flagsgp, asm: "SETPC"}, // extract "ordered" (No Nan present) condition from arg0 |
| {name: "SETNAN", argLength: 1, reg: flagsgp, asm: "SETPS"}, // extract "unordered" (Nan present) condition from arg0 |
| |
| {name: "SETGF", argLength: 1, reg: flagsgp, asm: "SETHI"}, // extract floating > condition from arg0 |
| {name: "SETGEF", argLength: 1, reg: flagsgp, asm: "SETCC"}, // extract floating >= condition from arg0 |
| |
| {name: "MOVBQSX", argLength: 1, reg: gp11, asm: "MOVBQSX"}, // sign extend arg0 from int8 to int64 |
| {name: "MOVBQZX", argLength: 1, reg: gp11, asm: "MOVBLZX"}, // zero extend arg0 from int8 to int64 |
| {name: "MOVWQSX", argLength: 1, reg: gp11, asm: "MOVWQSX"}, // sign extend arg0 from int16 to int64 |
| {name: "MOVWQZX", argLength: 1, reg: gp11, asm: "MOVWLZX"}, // zero extend arg0 from int16 to int64 |
| {name: "MOVLQSX", argLength: 1, reg: gp11, asm: "MOVLQSX"}, // sign extend arg0 from int32 to int64 |
| {name: "MOVLQZX", argLength: 1, reg: gp11, asm: "MOVL"}, // zero extend arg0 from int32 to int64 |
| |
| {name: "MOVLconst", reg: gp01, asm: "MOVL", typ: "UInt32", aux: "Int32", rematerializeable: true}, // 32 low bits of auxint |
| {name: "MOVQconst", reg: gp01, asm: "MOVQ", typ: "UInt64", aux: "Int64", rematerializeable: true}, // auxint |
| |
| {name: "CVTTSD2SL", argLength: 1, reg: fpgp, asm: "CVTTSD2SL"}, // convert float64 to int32 |
| {name: "CVTTSD2SQ", argLength: 1, reg: fpgp, asm: "CVTTSD2SQ"}, // convert float64 to int64 |
| {name: "CVTTSS2SL", argLength: 1, reg: fpgp, asm: "CVTTSS2SL"}, // convert float32 to int32 |
| {name: "CVTTSS2SQ", argLength: 1, reg: fpgp, asm: "CVTTSS2SQ"}, // convert float32 to int64 |
| {name: "CVTSL2SS", argLength: 1, reg: gpfp, asm: "CVTSL2SS"}, // convert int32 to float32 |
| {name: "CVTSL2SD", argLength: 1, reg: gpfp, asm: "CVTSL2SD"}, // convert int32 to float64 |
| {name: "CVTSQ2SS", argLength: 1, reg: gpfp, asm: "CVTSQ2SS"}, // convert int64 to float32 |
| {name: "CVTSQ2SD", argLength: 1, reg: gpfp, asm: "CVTSQ2SD"}, // convert int64 to float64 |
| {name: "CVTSD2SS", argLength: 1, reg: fp11, asm: "CVTSD2SS"}, // convert float64 to float32 |
| {name: "CVTSS2SD", argLength: 1, reg: fp11, asm: "CVTSS2SD"}, // convert float32 to float64 |
| |
| // Move values between int and float registers, with no conversion. |
| // TODO: should we have generic versions of these? |
| {name: "MOVQi2f", argLength: 1, reg: gpfp, typ: "Float64"}, // move 64 bits from int to float reg |
| {name: "MOVQf2i", argLength: 1, reg: fpgp, typ: "UInt64"}, // move 64 bits from float to int reg |
| {name: "MOVLi2f", argLength: 1, reg: gpfp, typ: "Float32"}, // move 32 bits from int to float reg |
| {name: "MOVLf2i", argLength: 1, reg: fpgp, typ: "UInt32"}, // move 32 bits from float to int reg, zero extend |
| |
| {name: "PXOR", argLength: 2, reg: fp21, asm: "PXOR", commutative: true, resultInArg0: true}, // exclusive or, applied to X regs for float negation. |
| |
| {name: "LEAQ", argLength: 1, reg: gp11sb, asm: "LEAQ", aux: "SymOff", rematerializeable: true, symEffect: "Addr"}, // arg0 + auxint + offset encoded in aux |
| {name: "LEAL", argLength: 1, reg: gp11sb, asm: "LEAL", aux: "SymOff", rematerializeable: true, symEffect: "Addr"}, // arg0 + auxint + offset encoded in aux |
| {name: "LEAW", argLength: 1, reg: gp11sb, asm: "LEAW", aux: "SymOff", rematerializeable: true, symEffect: "Addr"}, // arg0 + auxint + offset encoded in aux |
| {name: "LEAQ1", argLength: 2, reg: gp21sb, asm: "LEAQ", scale: 1, commutative: true, aux: "SymOff", symEffect: "Addr"}, // arg0 + arg1 + auxint + aux |
| {name: "LEAL1", argLength: 2, reg: gp21sb, asm: "LEAL", scale: 1, commutative: true, aux: "SymOff", symEffect: "Addr"}, // arg0 + arg1 + auxint + aux |
| {name: "LEAW1", argLength: 2, reg: gp21sb, asm: "LEAW", scale: 1, commutative: true, aux: "SymOff", symEffect: "Addr"}, // arg0 + arg1 + auxint + aux |
| {name: "LEAQ2", argLength: 2, reg: gp21sb, asm: "LEAQ", scale: 2, aux: "SymOff", symEffect: "Addr"}, // arg0 + 2*arg1 + auxint + aux |
| {name: "LEAL2", argLength: 2, reg: gp21sb, asm: "LEAL", scale: 2, aux: "SymOff", symEffect: "Addr"}, // arg0 + 2*arg1 + auxint + aux |
| {name: "LEAW2", argLength: 2, reg: gp21sb, asm: "LEAW", scale: 2, aux: "SymOff", symEffect: "Addr"}, // arg0 + 2*arg1 + auxint + aux |
| {name: "LEAQ4", argLength: 2, reg: gp21sb, asm: "LEAQ", scale: 4, aux: "SymOff", symEffect: "Addr"}, // arg0 + 4*arg1 + auxint + aux |
| {name: "LEAL4", argLength: 2, reg: gp21sb, asm: "LEAL", scale: 4, aux: "SymOff", symEffect: "Addr"}, // arg0 + 4*arg1 + auxint + aux |
| {name: "LEAW4", argLength: 2, reg: gp21sb, asm: "LEAW", scale: 4, aux: "SymOff", symEffect: "Addr"}, // arg0 + 4*arg1 + auxint + aux |
| {name: "LEAQ8", argLength: 2, reg: gp21sb, asm: "LEAQ", scale: 8, aux: "SymOff", symEffect: "Addr"}, // arg0 + 8*arg1 + auxint + aux |
| {name: "LEAL8", argLength: 2, reg: gp21sb, asm: "LEAL", scale: 8, aux: "SymOff", symEffect: "Addr"}, // arg0 + 8*arg1 + auxint + aux |
| {name: "LEAW8", argLength: 2, reg: gp21sb, asm: "LEAW", scale: 8, aux: "SymOff", symEffect: "Addr"}, // arg0 + 8*arg1 + auxint + aux |
| // Note: LEAx{1,2,4,8} must not have OpSB as either argument. |
| |
| // auxint+aux == add auxint and the offset of the symbol in aux (if any) to the effective address |
| {name: "MOVBload", argLength: 2, reg: gpload, asm: "MOVBLZX", aux: "SymOff", typ: "UInt8", faultOnNilArg0: true, symEffect: "Read"}, // load byte from arg0+auxint+aux. arg1=mem. Zero extend. |
| {name: "MOVBQSXload", argLength: 2, reg: gpload, asm: "MOVBQSX", aux: "SymOff", faultOnNilArg0: true, symEffect: "Read"}, // ditto, sign extend to int64 |
| {name: "MOVWload", argLength: 2, reg: gpload, asm: "MOVWLZX", aux: "SymOff", typ: "UInt16", faultOnNilArg0: true, symEffect: "Read"}, // load 2 bytes from arg0+auxint+aux. arg1=mem. Zero extend. |
| {name: "MOVWQSXload", argLength: 2, reg: gpload, asm: "MOVWQSX", aux: "SymOff", faultOnNilArg0: true, symEffect: "Read"}, // ditto, sign extend to int64 |
| {name: "MOVLload", argLength: 2, reg: gpload, asm: "MOVL", aux: "SymOff", typ: "UInt32", faultOnNilArg0: true, symEffect: "Read"}, // load 4 bytes from arg0+auxint+aux. arg1=mem. Zero extend. |
| {name: "MOVLQSXload", argLength: 2, reg: gpload, asm: "MOVLQSX", aux: "SymOff", faultOnNilArg0: true, symEffect: "Read"}, // ditto, sign extend to int64 |
| {name: "MOVQload", argLength: 2, reg: gpload, asm: "MOVQ", aux: "SymOff", typ: "UInt64", faultOnNilArg0: true, symEffect: "Read"}, // load 8 bytes from arg0+auxint+aux. arg1=mem |
| {name: "MOVBstore", argLength: 3, reg: gpstore, asm: "MOVB", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store byte in arg1 to arg0+auxint+aux. arg2=mem |
| {name: "MOVWstore", argLength: 3, reg: gpstore, asm: "MOVW", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store 2 bytes in arg1 to arg0+auxint+aux. arg2=mem |
| {name: "MOVLstore", argLength: 3, reg: gpstore, asm: "MOVL", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store 4 bytes in arg1 to arg0+auxint+aux. arg2=mem |
| {name: "MOVQstore", argLength: 3, reg: gpstore, asm: "MOVQ", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store 8 bytes in arg1 to arg0+auxint+aux. arg2=mem |
| {name: "MOVOload", argLength: 2, reg: fpload, asm: "MOVUPS", aux: "SymOff", typ: "Int128", faultOnNilArg0: true, symEffect: "Read"}, // load 16 bytes from arg0+auxint+aux. arg1=mem |
| {name: "MOVOstore", argLength: 3, reg: fpstore, asm: "MOVUPS", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store 16 bytes in arg1 to arg0+auxint+aux. arg2=mem |
| |
| // indexed loads/stores |
| {name: "MOVBloadidx1", argLength: 3, reg: gploadidx, commutative: true, asm: "MOVBLZX", scale: 1, aux: "SymOff", typ: "UInt8", symEffect: "Read"}, // load a byte from arg0+arg1+auxint+aux. arg2=mem |
| {name: "MOVWloadidx1", argLength: 3, reg: gploadidx, commutative: true, asm: "MOVWLZX", scale: 1, aux: "SymOff", typ: "UInt16", symEffect: "Read"}, // load 2 bytes from arg0+arg1+auxint+aux. arg2=mem |
| {name: "MOVWloadidx2", argLength: 3, reg: gploadidx, asm: "MOVWLZX", scale: 2, aux: "SymOff", typ: "UInt16", symEffect: "Read"}, // load 2 bytes from arg0+2*arg1+auxint+aux. arg2=mem |
| {name: "MOVLloadidx1", argLength: 3, reg: gploadidx, commutative: true, asm: "MOVL", scale: 1, aux: "SymOff", typ: "UInt32", symEffect: "Read"}, // load 4 bytes from arg0+arg1+auxint+aux. arg2=mem |
| {name: "MOVLloadidx4", argLength: 3, reg: gploadidx, asm: "MOVL", scale: 4, aux: "SymOff", typ: "UInt32", symEffect: "Read"}, // load 4 bytes from arg0+4*arg1+auxint+aux. arg2=mem |
| {name: "MOVLloadidx8", argLength: 3, reg: gploadidx, asm: "MOVL", scale: 8, aux: "SymOff", typ: "UInt32", symEffect: "Read"}, // load 4 bytes from arg0+8*arg1+auxint+aux. arg2=mem |
| {name: "MOVQloadidx1", argLength: 3, reg: gploadidx, commutative: true, asm: "MOVQ", scale: 1, aux: "SymOff", typ: "UInt64", symEffect: "Read"}, // load 8 bytes from arg0+arg1+auxint+aux. arg2=mem |
| {name: "MOVQloadidx8", argLength: 3, reg: gploadidx, asm: "MOVQ", scale: 8, aux: "SymOff", typ: "UInt64", symEffect: "Read"}, // load 8 bytes from arg0+8*arg1+auxint+aux. arg2=mem |
| // TODO: sign-extending indexed loads |
| {name: "MOVBstoreidx1", argLength: 4, reg: gpstoreidx, commutative: true, asm: "MOVB", scale: 1, aux: "SymOff", symEffect: "Write"}, // store byte in arg2 to arg0+arg1+auxint+aux. arg3=mem |
| {name: "MOVWstoreidx1", argLength: 4, reg: gpstoreidx, commutative: true, asm: "MOVW", scale: 1, aux: "SymOff", symEffect: "Write"}, // store 2 bytes in arg2 to arg0+arg1+auxint+aux. arg3=mem |
| {name: "MOVWstoreidx2", argLength: 4, reg: gpstoreidx, asm: "MOVW", scale: 2, aux: "SymOff", symEffect: "Write"}, // store 2 bytes in arg2 to arg0+2*arg1+auxint+aux. arg3=mem |
| {name: "MOVLstoreidx1", argLength: 4, reg: gpstoreidx, commutative: true, asm: "MOVL", scale: 1, aux: "SymOff", symEffect: "Write"}, // store 4 bytes in arg2 to arg0+arg1+auxint+aux. arg3=mem |
| {name: "MOVLstoreidx4", argLength: 4, reg: gpstoreidx, asm: "MOVL", scale: 4, aux: "SymOff", symEffect: "Write"}, // store 4 bytes in arg2 to arg0+4*arg1+auxint+aux. arg3=mem |
| {name: "MOVLstoreidx8", argLength: 4, reg: gpstoreidx, asm: "MOVL", scale: 8, aux: "SymOff", symEffect: "Write"}, // store 4 bytes in arg2 to arg0+8*arg1+auxint+aux. arg3=mem |
| {name: "MOVQstoreidx1", argLength: 4, reg: gpstoreidx, commutative: true, asm: "MOVQ", scale: 1, aux: "SymOff", symEffect: "Write"}, // store 8 bytes in arg2 to arg0+arg1+auxint+aux. arg3=mem |
| {name: "MOVQstoreidx8", argLength: 4, reg: gpstoreidx, asm: "MOVQ", scale: 8, aux: "SymOff", symEffect: "Write"}, // store 8 bytes in arg2 to arg0+8*arg1+auxint+aux. arg3=mem |
| // TODO: add size-mismatched indexed loads, like MOVBstoreidx4. |
| |
| // For storeconst ops, the AuxInt field encodes both |
| // the value to store and an address offset of the store. |
| // Cast AuxInt to a ValAndOff to extract Val and Off fields. |
| {name: "MOVBstoreconst", argLength: 2, reg: gpstoreconst, asm: "MOVB", aux: "SymValAndOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store low byte of ValAndOff(AuxInt).Val() to arg0+ValAndOff(AuxInt).Off()+aux. arg1=mem |
| {name: "MOVWstoreconst", argLength: 2, reg: gpstoreconst, asm: "MOVW", aux: "SymValAndOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store low 2 bytes of ... |
| {name: "MOVLstoreconst", argLength: 2, reg: gpstoreconst, asm: "MOVL", aux: "SymValAndOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store low 4 bytes of ... |
| {name: "MOVQstoreconst", argLength: 2, reg: gpstoreconst, asm: "MOVQ", aux: "SymValAndOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store 8 bytes of ... |
| |
| {name: "MOVBstoreconstidx1", argLength: 3, reg: gpstoreconstidx, commutative: true, asm: "MOVB", scale: 1, aux: "SymValAndOff", typ: "Mem", symEffect: "Write"}, // store low byte of ValAndOff(AuxInt).Val() to arg0+1*arg1+ValAndOff(AuxInt).Off()+aux. arg2=mem |
| {name: "MOVWstoreconstidx1", argLength: 3, reg: gpstoreconstidx, commutative: true, asm: "MOVW", scale: 1, aux: "SymValAndOff", typ: "Mem", symEffect: "Write"}, // store low 2 bytes of ... arg1 ... |
| {name: "MOVWstoreconstidx2", argLength: 3, reg: gpstoreconstidx, asm: "MOVW", scale: 2, aux: "SymValAndOff", typ: "Mem", symEffect: "Write"}, // store low 2 bytes of ... 2*arg1 ... |
| {name: "MOVLstoreconstidx1", argLength: 3, reg: gpstoreconstidx, commutative: true, asm: "MOVL", scale: 1, aux: "SymValAndOff", typ: "Mem", symEffect: "Write"}, // store low 4 bytes of ... arg1 ... |
| {name: "MOVLstoreconstidx4", argLength: 3, reg: gpstoreconstidx, asm: "MOVL", scale: 4, aux: "SymValAndOff", typ: "Mem", symEffect: "Write"}, // store low 4 bytes of ... 4*arg1 ... |
| {name: "MOVQstoreconstidx1", argLength: 3, reg: gpstoreconstidx, commutative: true, asm: "MOVQ", scale: 1, aux: "SymValAndOff", typ: "Mem", symEffect: "Write"}, // store 8 bytes of ... arg1 ... |
| {name: "MOVQstoreconstidx8", argLength: 3, reg: gpstoreconstidx, asm: "MOVQ", scale: 8, aux: "SymValAndOff", typ: "Mem", symEffect: "Write"}, // store 8 bytes of ... 8*arg1 ... |
| |
| // arg0 = pointer to start of memory to zero |
| // arg1 = value to store (will always be zero) |
| // arg2 = mem |
| // auxint = # of bytes to zero |
| // returns mem |
| { |
| name: "DUFFZERO", |
| aux: "Int64", |
| argLength: 3, |
| reg: regInfo{ |
| inputs: []regMask{buildReg("DI"), buildReg("X0")}, |
| clobbers: buildReg("DI"), |
| }, |
| faultOnNilArg0: true, |
| unsafePoint: true, // FP maintenance around DUFFCOPY can be clobbered by interrupts |
| }, |
| {name: "MOVOconst", reg: regInfo{nil, 0, []regMask{fp}}, typ: "Int128", aux: "Int128", rematerializeable: true}, |
| |
| // arg0 = address of memory to zero |
| // arg1 = # of 8-byte words to zero |
| // arg2 = value to store (will always be zero) |
| // arg3 = mem |
| // returns mem |
| { |
| name: "REPSTOSQ", |
| argLength: 4, |
| reg: regInfo{ |
| inputs: []regMask{buildReg("DI"), buildReg("CX"), buildReg("AX")}, |
| clobbers: buildReg("DI CX"), |
| }, |
| faultOnNilArg0: true, |
| }, |
| |
| {name: "CALLstatic", argLength: 1, reg: regInfo{clobbers: callerSave}, aux: "CallOff", clobberFlags: true, call: true}, // call static function aux.(*obj.LSym). arg0=mem, auxint=argsize, returns mem |
| {name: "CALLclosure", argLength: 3, reg: regInfo{inputs: []regMask{gpsp, buildReg("DX"), 0}, clobbers: callerSave}, aux: "CallOff", clobberFlags: true, call: true}, // call function via closure. arg0=codeptr, arg1=closure, arg2=mem, auxint=argsize, returns mem |
| {name: "CALLinter", argLength: 2, reg: regInfo{inputs: []regMask{gp}, clobbers: callerSave}, aux: "CallOff", clobberFlags: true, call: true}, // call fn by pointer. arg0=codeptr, arg1=mem, auxint=argsize, returns mem |
| |
| // arg0 = destination pointer |
| // arg1 = source pointer |
| // arg2 = mem |
| // auxint = # of bytes to copy, must be multiple of 16 |
| // returns memory |
| { |
| name: "DUFFCOPY", |
| aux: "Int64", |
| argLength: 3, |
| reg: regInfo{ |
| inputs: []regMask{buildReg("DI"), buildReg("SI")}, |
| clobbers: buildReg("DI SI X0"), // uses X0 as a temporary |
| }, |
| clobberFlags: true, |
| faultOnNilArg0: true, |
| faultOnNilArg1: true, |
| unsafePoint: true, // FP maintenance around DUFFCOPY can be clobbered by interrupts |
| }, |
| |
| // arg0 = destination pointer |
| // arg1 = source pointer |
| // arg2 = # of 8-byte words to copy |
| // arg3 = mem |
| // returns memory |
| { |
| name: "REPMOVSQ", |
| argLength: 4, |
| reg: regInfo{ |
| inputs: []regMask{buildReg("DI"), buildReg("SI"), buildReg("CX")}, |
| clobbers: buildReg("DI SI CX"), |
| }, |
| faultOnNilArg0: true, |
| faultOnNilArg1: true, |
| }, |
| |
| // (InvertFlags (CMPQ a b)) == (CMPQ b a) |
| // So if we want (SETL (CMPQ a b)) but we can't do that because a is a constant, |
| // then we do (SETL (InvertFlags (CMPQ b a))) instead. |
| // Rewrites will convert this to (SETG (CMPQ b a)). |
| // InvertFlags is a pseudo-op which can't appear in assembly output. |
| {name: "InvertFlags", argLength: 1}, // reverse direction of arg0 |
| |
| // Pseudo-ops |
| {name: "LoweredGetG", argLength: 1, reg: gp01}, // arg0=mem |
| // Scheduler ensures LoweredGetClosurePtr occurs only in entry block, |
| // and sorts it to the very beginning of the block to prevent other |
| // use of DX (the closure pointer) |
| {name: "LoweredGetClosurePtr", reg: regInfo{outputs: []regMask{buildReg("DX")}}, zeroWidth: true}, |
| // LoweredGetCallerPC evaluates to the PC to which its "caller" will return. |
| // I.e., if f calls g "calls" getcallerpc, |
| // the result should be the PC within f that g will return to. |
| // See runtime/stubs.go for a more detailed discussion. |
| {name: "LoweredGetCallerPC", reg: gp01, rematerializeable: true}, |
| // LoweredGetCallerSP returns the SP of the caller of the current function. |
| {name: "LoweredGetCallerSP", reg: gp01, rematerializeable: true}, |
| //arg0=ptr,arg1=mem, returns void. Faults if ptr is nil. |
| {name: "LoweredNilCheck", argLength: 2, reg: regInfo{inputs: []regMask{gpsp}}, clobberFlags: true, nilCheck: true, faultOnNilArg0: true}, |
| // LoweredWB invokes runtime.gcWriteBarrier. arg0=destptr, arg1=srcptr, arg2=mem, aux=runtime.gcWriteBarrier |
| // It saves all GP registers if necessary, but may clobber others. |
| {name: "LoweredWB", argLength: 3, reg: regInfo{inputs: []regMask{buildReg("DI"), buildReg("AX CX DX BX BP SI R8 R9")}, clobbers: callerSave &^ gp}, clobberFlags: true, aux: "Sym", symEffect: "None"}, |
| |
| {name: "LoweredHasCPUFeature", argLength: 0, reg: gp01, rematerializeable: true, typ: "UInt64", aux: "Sym", symEffect: "None"}, |
| |
| // There are three of these functions so that they can have three different register inputs. |
| // When we check 0 <= c <= cap (A), then 0 <= b <= c (B), then 0 <= a <= b (C), we want the |
| // default registers to match so we don't need to copy registers around unnecessarily. |
| {name: "LoweredPanicBoundsA", argLength: 3, aux: "Int64", reg: regInfo{inputs: []regMask{dx, bx}}, typ: "Mem", call: true}, // arg0=idx, arg1=len, arg2=mem, returns memory. AuxInt contains report code (see PanicBounds in generic.go). |
| {name: "LoweredPanicBoundsB", argLength: 3, aux: "Int64", reg: regInfo{inputs: []regMask{cx, dx}}, typ: "Mem", call: true}, // arg0=idx, arg1=len, arg2=mem, returns memory. AuxInt contains report code (see PanicBounds in generic.go). |
| {name: "LoweredPanicBoundsC", argLength: 3, aux: "Int64", reg: regInfo{inputs: []regMask{ax, cx}}, typ: "Mem", call: true}, // arg0=idx, arg1=len, arg2=mem, returns memory. AuxInt contains report code (see PanicBounds in generic.go). |
| |
| // Constant flag values. For any comparison, there are 5 possible |
| // outcomes: the three from the signed total order (<,==,>) and the |
| // three from the unsigned total order. The == cases overlap. |
| // Note: there's a sixth "unordered" outcome for floating-point |
| // comparisons, but we don't use such a beast yet. |
| // These ops are for temporary use by rewrite rules. They |
| // cannot appear in the generated assembly. |
| {name: "FlagEQ"}, // equal |
| {name: "FlagLT_ULT"}, // signed < and unsigned < |
| {name: "FlagLT_UGT"}, // signed < and unsigned > |
| {name: "FlagGT_UGT"}, // signed > and unsigned > |
| {name: "FlagGT_ULT"}, // signed > and unsigned < |
| |
| // Atomic loads. These are just normal loads but return <value,memory> tuples |
| // so they can be properly ordered with other loads. |
| // load from arg0+auxint+aux. arg1=mem. |
| {name: "MOVBatomicload", argLength: 2, reg: gpload, asm: "MOVB", aux: "SymOff", faultOnNilArg0: true, symEffect: "Read"}, |
| {name: "MOVLatomicload", argLength: 2, reg: gpload, asm: "MOVL", aux: "SymOff", faultOnNilArg0: true, symEffect: "Read"}, |
| {name: "MOVQatomicload", argLength: 2, reg: gpload, asm: "MOVQ", aux: "SymOff", faultOnNilArg0: true, symEffect: "Read"}, |
| |
| // Atomic stores and exchanges. Stores use XCHG to get the right memory ordering semantics. |
| // store arg0 to arg1+auxint+aux, arg2=mem. |
| // These ops return a tuple of <old contents of *(arg1+auxint+aux), memory>. |
| // Note: arg0 and arg1 are backwards compared to MOVLstore (to facilitate resultInArg0)! |
| {name: "XCHGB", argLength: 3, reg: gpstorexchg, asm: "XCHGB", aux: "SymOff", resultInArg0: true, faultOnNilArg1: true, hasSideEffects: true, symEffect: "RdWr"}, |
| {name: "XCHGL", argLength: 3, reg: gpstorexchg, asm: "XCHGL", aux: "SymOff", resultInArg0: true, faultOnNilArg1: true, hasSideEffects: true, symEffect: "RdWr"}, |
| {name: "XCHGQ", argLength: 3, reg: gpstorexchg, asm: "XCHGQ", aux: "SymOff", resultInArg0: true, faultOnNilArg1: true, hasSideEffects: true, symEffect: "RdWr"}, |
| |
| // Atomic adds. |
| // *(arg1+auxint+aux) += arg0. arg2=mem. |
| // Returns a tuple of <old contents of *(arg1+auxint+aux), memory>. |
| // Note: arg0 and arg1 are backwards compared to MOVLstore (to facilitate resultInArg0)! |
| {name: "XADDLlock", argLength: 3, reg: gpstorexchg, asm: "XADDL", typ: "(UInt32,Mem)", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, hasSideEffects: true, symEffect: "RdWr"}, |
| {name: "XADDQlock", argLength: 3, reg: gpstorexchg, asm: "XADDQ", typ: "(UInt64,Mem)", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, hasSideEffects: true, symEffect: "RdWr"}, |
| {name: "AddTupleFirst32", argLength: 2}, // arg1=tuple <x,y>. Returns <x+arg0,y>. |
| {name: "AddTupleFirst64", argLength: 2}, // arg1=tuple <x,y>. Returns <x+arg0,y>. |
| |
| // Compare and swap. |
| // arg0 = pointer, arg1 = old value, arg2 = new value, arg3 = memory. |
| // if *(arg0+auxint+aux) == arg1 { |
| // *(arg0+auxint+aux) = arg2 |
| // return (true, memory) |
| // } else { |
| // return (false, memory) |
| // } |
| // Note that these instructions also return the old value in AX, but we ignore it. |
| // TODO: have these return flags instead of bool. The current system generates: |
| // CMPXCHGQ ... |
| // SETEQ AX |
| // CMPB AX, $0 |
| // JNE ... |
| // instead of just |
| // CMPXCHGQ ... |
| // JEQ ... |
| // but we can't do that because memory-using ops can't generate flags yet |
| // (flagalloc wants to move flag-generating instructions around). |
| {name: "CMPXCHGLlock", argLength: 4, reg: cmpxchg, asm: "CMPXCHGL", aux: "SymOff", clobberFlags: true, faultOnNilArg0: true, hasSideEffects: true, symEffect: "RdWr"}, |
| {name: "CMPXCHGQlock", argLength: 4, reg: cmpxchg, asm: "CMPXCHGQ", aux: "SymOff", clobberFlags: true, faultOnNilArg0: true, hasSideEffects: true, symEffect: "RdWr"}, |
| |
| // Atomic memory updates. |
| {name: "ANDBlock", argLength: 3, reg: gpstore, asm: "ANDB", aux: "SymOff", clobberFlags: true, faultOnNilArg0: true, hasSideEffects: true, symEffect: "RdWr"}, // *(arg0+auxint+aux) &= arg1 |
| {name: "ORBlock", argLength: 3, reg: gpstore, asm: "ORB", aux: "SymOff", clobberFlags: true, faultOnNilArg0: true, hasSideEffects: true, symEffect: "RdWr"}, // *(arg0+auxint+aux) |= arg1 |
| } |
| |
| var AMD64blocks = []blockData{ |
| {name: "EQ", controls: 1}, |
| {name: "NE", controls: 1}, |
| {name: "LT", controls: 1}, |
| {name: "LE", controls: 1}, |
| {name: "GT", controls: 1}, |
| {name: "GE", controls: 1}, |
| {name: "OS", controls: 1}, |
| {name: "OC", controls: 1}, |
| {name: "ULT", controls: 1}, |
| {name: "ULE", controls: 1}, |
| {name: "UGT", controls: 1}, |
| {name: "UGE", controls: 1}, |
| {name: "EQF", controls: 1}, |
| {name: "NEF", controls: 1}, |
| {name: "ORD", controls: 1}, // FP, ordered comparison (parity zero) |
| {name: "NAN", controls: 1}, // FP, unordered comparison (parity one) |
| } |
| |
| archs = append(archs, arch{ |
| name: "AMD64", |
| pkg: "cmd/internal/obj/x86", |
| genfile: "../../amd64/ssa.go", |
| ops: AMD64ops, |
| blocks: AMD64blocks, |
| regnames: regNamesAMD64, |
| gpregmask: gp, |
| fpregmask: fp, |
| framepointerreg: int8(num["BP"]), |
| linkreg: -1, // not used |
| }) |
| } |
