blob: ddabde7d3d7a848eb41b7ce9a721d55a3fd3aab8 [file] [log] [blame]
// Copyright 2016 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
// +build ignore
package main
import "strings"
// Notes:
// - Integer types live in the low portion of registers. Upper portions are junk.
// - Boolean types use the low-order byte of a register. 0=false, 1=true.
// Upper bytes are junk.
// - Floating-point types live in the low natural slot of an sse2 register.
// Unused portions are junk.
// - We do not use AH,BH,CH,DH registers.
// - When doing sub-register operations, we try to write the whole
// destination register to avoid a partial-register write.
// - Unused portions of AuxInt (or the Val portion of ValAndOff) are
// filled by sign-extending the used portion. Users of AuxInt which interpret
// AuxInt as unsigned (e.g. shifts) must be careful.
// Suffixes encode the bit width of various instructions.
// L (long word) = 32 bit
// W (word) = 16 bit
// B (byte) = 8 bit
// copied from ../../x86/reg.go
var regNames386 = []string{
"AX",
"CX",
"DX",
"BX",
"SP",
"BP",
"SI",
"DI",
"X0",
"X1",
"X2",
"X3",
"X4",
"X5",
"X6",
"X7",
// If you add registers, update asyncPreempt in runtime
// pseudo-registers
"SB",
}
// Notes on 387 support.
// - The 387 has a weird stack-register setup for floating-point registers.
// We use these registers when SSE registers are not available (when GO386=387).
// - We use the same register names (X0-X7) but they refer to the 387
// floating-point registers. That way, most of the SSA backend is unchanged.
// - The instruction generation pass maintains an SSE->387 register mapping.
// This mapping is updated whenever the FP stack is pushed or popped so that
// we can always find a given SSE register even when the TOS pointer has changed.
// - To facilitate the mapping from SSE to 387, we enforce that
// every basic block starts and ends with an empty floating-point stack.
func init() {
// Make map from reg names to reg integers.
if len(regNames386) > 64 {
panic("too many registers")
}
num := map[string]int{}
for i, name := range regNames386 {
num[name] = i
}
buildReg := func(s string) regMask {
m := regMask(0)
for _, r := range strings.Split(s, " ") {
if n, ok := num[r]; ok {
m |= regMask(1) << uint(n)
continue
}
panic("register " + r + " not found")
}
return m
}
// Common individual register masks
var (
ax = buildReg("AX")
cx = buildReg("CX")
dx = buildReg("DX")
bx = buildReg("BX")
si = buildReg("SI")
gp = buildReg("AX CX DX BX BP SI DI")
fp = buildReg("X0 X1 X2 X3 X4 X5 X6 X7")
gpsp = gp | buildReg("SP")
gpspsb = gpsp | buildReg("SB")
callerSave = gp | fp
)
// Common slices of register masks
var (
gponly = []regMask{gp}
fponly = []regMask{fp}
)
// Common regInfo
var (
gp01 = regInfo{inputs: nil, outputs: gponly}
gp11 = regInfo{inputs: []regMask{gp}, outputs: gponly}
gp11sp = regInfo{inputs: []regMask{gpsp}, outputs: gponly}
gp11sb = regInfo{inputs: []regMask{gpspsb}, outputs: gponly}
gp21 = regInfo{inputs: []regMask{gp, gp}, outputs: gponly}
gp11carry = regInfo{inputs: []regMask{gp}, outputs: []regMask{gp, 0}}
gp21carry = regInfo{inputs: []regMask{gp, gp}, outputs: []regMask{gp, 0}}
gp1carry1 = regInfo{inputs: []regMask{gp}, outputs: gponly}
gp2carry1 = regInfo{inputs: []regMask{gp, gp}, outputs: gponly}
gp21sp = regInfo{inputs: []regMask{gpsp, gp}, outputs: gponly}
gp21sb = regInfo{inputs: []regMask{gpspsb, gpsp}, outputs: gponly}
gp21shift = regInfo{inputs: []regMask{gp, cx}, outputs: []regMask{gp}}
gp11div = regInfo{inputs: []regMask{ax, gpsp &^ dx}, outputs: []regMask{ax}, clobbers: dx}
gp21hmul = regInfo{inputs: []regMask{ax, gpsp}, outputs: []regMask{dx}, clobbers: ax}
gp11mod = regInfo{inputs: []regMask{ax, gpsp &^ dx}, outputs: []regMask{dx}, clobbers: ax}
gp21mul = regInfo{inputs: []regMask{ax, gpsp}, outputs: []regMask{dx, ax}}
gp2flags = regInfo{inputs: []regMask{gpsp, gpsp}}
gp1flags = regInfo{inputs: []regMask{gpsp}}
gp0flagsLoad = regInfo{inputs: []regMask{gpspsb, 0}}
gp1flagsLoad = regInfo{inputs: []regMask{gpspsb, gpsp, 0}}
flagsgp = regInfo{inputs: nil, outputs: gponly}
readflags = regInfo{inputs: nil, outputs: gponly}
flagsgpax = regInfo{inputs: nil, clobbers: ax, outputs: []regMask{gp &^ ax}}
gpload = regInfo{inputs: []regMask{gpspsb, 0}, outputs: gponly}
gp21load = regInfo{inputs: []regMask{gp, gpspsb, 0}, outputs: gponly}
gploadidx = regInfo{inputs: []regMask{gpspsb, gpsp, 0}, outputs: gponly}
gp21loadidx = regInfo{inputs: []regMask{gp, gpspsb, gpsp, 0}, outputs: gponly}
gpstore = regInfo{inputs: []regMask{gpspsb, gpsp, 0}}
gpstoreconst = regInfo{inputs: []regMask{gpspsb, 0}}
gpstoreidx = regInfo{inputs: []regMask{gpspsb, gpsp, gpsp, 0}}
gpstoreconstidx = regInfo{inputs: []regMask{gpspsb, gpsp, 0}}
fp01 = regInfo{inputs: nil, outputs: fponly}
fp21 = regInfo{inputs: []regMask{fp, fp}, outputs: fponly}
fp21load = regInfo{inputs: []regMask{fp, gpspsb, 0}, outputs: fponly}
fpgp = regInfo{inputs: fponly, outputs: gponly}
gpfp = regInfo{inputs: gponly, outputs: fponly}
fp11 = regInfo{inputs: fponly, outputs: fponly}
fp2flags = regInfo{inputs: []regMask{fp, fp}}
fpload = regInfo{inputs: []regMask{gpspsb, 0}, outputs: fponly}
fploadidx = regInfo{inputs: []regMask{gpspsb, gpsp, 0}, outputs: fponly}
fpstore = regInfo{inputs: []regMask{gpspsb, fp, 0}}
fpstoreidx = regInfo{inputs: []regMask{gpspsb, gpsp, fp, 0}}
)
var _386ops = []opData{
// fp ops
{name: "ADDSS", argLength: 2, reg: fp21, asm: "ADDSS", commutative: true, resultInArg0: true, usesScratch: true}, // fp32 add
{name: "ADDSD", argLength: 2, reg: fp21, asm: "ADDSD", commutative: true, resultInArg0: true}, // fp64 add
{name: "SUBSS", argLength: 2, reg: fp21, asm: "SUBSS", resultInArg0: true, usesScratch: true}, // fp32 sub
{name: "SUBSD", argLength: 2, reg: fp21, asm: "SUBSD", resultInArg0: true}, // fp64 sub
{name: "MULSS", argLength: 2, reg: fp21, asm: "MULSS", commutative: true, resultInArg0: true, usesScratch: true}, // fp32 mul
{name: "MULSD", argLength: 2, reg: fp21, asm: "MULSD", commutative: true, resultInArg0: true}, // fp64 mul
{name: "DIVSS", argLength: 2, reg: fp21, asm: "DIVSS", resultInArg0: true, usesScratch: true}, // fp32 div
{name: "DIVSD", argLength: 2, reg: fp21, asm: "DIVSD", resultInArg0: true}, // fp64 div
{name: "MOVSSload", argLength: 2, reg: fpload, asm: "MOVSS", aux: "SymOff", faultOnNilArg0: true, symEffect: "Read"}, // fp32 load
{name: "MOVSDload", argLength: 2, reg: fpload, asm: "MOVSD", aux: "SymOff", faultOnNilArg0: true, symEffect: "Read"}, // fp64 load
{name: "MOVSSconst", reg: fp01, asm: "MOVSS", aux: "Float32", rematerializeable: true}, // fp32 constant
{name: "MOVSDconst", reg: fp01, asm: "MOVSD", aux: "Float64", rematerializeable: true}, // fp64 constant
{name: "MOVSSloadidx1", argLength: 3, reg: fploadidx, asm: "MOVSS", aux: "SymOff", symEffect: "Read"}, // fp32 load indexed by i
{name: "MOVSSloadidx4", argLength: 3, reg: fploadidx, asm: "MOVSS", aux: "SymOff", symEffect: "Read"}, // fp32 load indexed by 4*i
{name: "MOVSDloadidx1", argLength: 3, reg: fploadidx, asm: "MOVSD", aux: "SymOff", symEffect: "Read"}, // fp64 load indexed by i
{name: "MOVSDloadidx8", argLength: 3, reg: fploadidx, asm: "MOVSD", aux: "SymOff", symEffect: "Read"}, // fp64 load indexed by 8*i
{name: "MOVSSstore", argLength: 3, reg: fpstore, asm: "MOVSS", aux: "SymOff", faultOnNilArg0: true, symEffect: "Write"}, // fp32 store
{name: "MOVSDstore", argLength: 3, reg: fpstore, asm: "MOVSD", aux: "SymOff", faultOnNilArg0: true, symEffect: "Write"}, // fp64 store
{name: "MOVSSstoreidx1", argLength: 4, reg: fpstoreidx, asm: "MOVSS", aux: "SymOff", symEffect: "Write"}, // fp32 indexed by i store
{name: "MOVSSstoreidx4", argLength: 4, reg: fpstoreidx, asm: "MOVSS", aux: "SymOff", symEffect: "Write"}, // fp32 indexed by 4i store
{name: "MOVSDstoreidx1", argLength: 4, reg: fpstoreidx, asm: "MOVSD", aux: "SymOff", symEffect: "Write"}, // fp64 indexed by i store
{name: "MOVSDstoreidx8", argLength: 4, reg: fpstoreidx, asm: "MOVSD", aux: "SymOff", symEffect: "Write"}, // fp64 indexed by 8i store
{name: "ADDSSload", argLength: 3, reg: fp21load, asm: "ADDSS", aux: "SymOff", resultInArg0: true, faultOnNilArg1: true, symEffect: "Read"}, // fp32 arg0 + tmp, tmp loaded from arg1+auxint+aux, arg2 = mem
{name: "ADDSDload", argLength: 3, reg: fp21load, asm: "ADDSD", aux: "SymOff", resultInArg0: true, faultOnNilArg1: true, symEffect: "Read"}, // fp64 arg0 + tmp, tmp loaded from arg1+auxint+aux, arg2 = mem
{name: "SUBSSload", argLength: 3, reg: fp21load, asm: "SUBSS", aux: "SymOff", resultInArg0: true, faultOnNilArg1: true, symEffect: "Read"}, // fp32 arg0 - tmp, tmp loaded from arg1+auxint+aux, arg2 = mem
{name: "SUBSDload", argLength: 3, reg: fp21load, asm: "SUBSD", aux: "SymOff", resultInArg0: true, faultOnNilArg1: true, symEffect: "Read"}, // fp64 arg0 - tmp, tmp loaded from arg1+auxint+aux, arg2 = mem
{name: "MULSSload", argLength: 3, reg: fp21load, asm: "MULSS", aux: "SymOff", resultInArg0: true, faultOnNilArg1: true, symEffect: "Read"}, // fp32 arg0 * tmp, tmp loaded from arg1+auxint+aux, arg2 = mem
{name: "MULSDload", argLength: 3, reg: fp21load, asm: "MULSD", aux: "SymOff", resultInArg0: true, faultOnNilArg1: true, symEffect: "Read"}, // fp64 arg0 * tmp, tmp loaded from arg1+auxint+aux, arg2 = mem
{name: "DIVSSload", argLength: 3, reg: fp21load, asm: "DIVSS", aux: "SymOff", resultInArg0: true, faultOnNilArg1: true, symEffect: "Read"}, // fp32 arg0 / tmp, tmp loaded from arg1+auxint+aux, arg2 = mem
{name: "DIVSDload", argLength: 3, reg: fp21load, asm: "DIVSD", aux: "SymOff", resultInArg0: true, faultOnNilArg1: true, symEffect: "Read"}, // fp64 arg0 / tmp, tmp loaded from arg1+auxint+aux, arg2 = mem
// binary ops
{name: "ADDL", argLength: 2, reg: gp21sp, asm: "ADDL", commutative: true, clobberFlags: true}, // arg0 + arg1
{name: "ADDLconst", argLength: 1, reg: gp11sp, asm: "ADDL", aux: "Int32", typ: "UInt32", clobberFlags: true}, // arg0 + auxint
{name: "ADDLcarry", argLength: 2, reg: gp21carry, asm: "ADDL", commutative: true, resultInArg0: true}, // arg0 + arg1, generates <carry,result> pair
{name: "ADDLconstcarry", argLength: 1, reg: gp11carry, asm: "ADDL", aux: "Int32", resultInArg0: true}, // arg0 + auxint, generates <carry,result> pair
{name: "ADCL", argLength: 3, reg: gp2carry1, asm: "ADCL", commutative: true, resultInArg0: true, clobberFlags: true}, // arg0+arg1+carry(arg2), where arg2 is flags
{name: "ADCLconst", argLength: 2, reg: gp1carry1, asm: "ADCL", aux: "Int32", resultInArg0: true, clobberFlags: true}, // arg0+auxint+carry(arg1), where arg1 is flags
{name: "SUBL", argLength: 2, reg: gp21, asm: "SUBL", resultInArg0: true, clobberFlags: true}, // arg0 - arg1
{name: "SUBLconst", argLength: 1, reg: gp11, asm: "SUBL", aux: "Int32", resultInArg0: true, clobberFlags: true}, // arg0 - auxint
{name: "SUBLcarry", argLength: 2, reg: gp21carry, asm: "SUBL", resultInArg0: true}, // arg0-arg1, generates <borrow,result> pair
{name: "SUBLconstcarry", argLength: 1, reg: gp11carry, asm: "SUBL", aux: "Int32", resultInArg0: true}, // arg0-auxint, generates <borrow,result> pair
{name: "SBBL", argLength: 3, reg: gp2carry1, asm: "SBBL", resultInArg0: true, clobberFlags: true}, // arg0-arg1-borrow(arg2), where arg2 is flags
{name: "SBBLconst", argLength: 2, reg: gp1carry1, asm: "SBBL", aux: "Int32", resultInArg0: true, clobberFlags: true}, // arg0-auxint-borrow(arg1), where arg1 is flags
{name: "MULL", argLength: 2, reg: gp21, asm: "IMULL", commutative: true, resultInArg0: true, clobberFlags: true}, // arg0 * arg1
{name: "MULLconst", argLength: 1, reg: gp11, asm: "IMUL3L", aux: "Int32", clobberFlags: true}, // arg0 * auxint
{name: "MULLU", argLength: 2, reg: regInfo{inputs: []regMask{ax, gpsp}, outputs: []regMask{ax, 0}, clobbers: dx}, typ: "(UInt32,Flags)", asm: "MULL", commutative: true, clobberFlags: true}, // Let x = arg0*arg1 (full 32x32->64 unsigned multiply). Returns uint32(x), and flags set to overflow if uint32(x) != x.
{name: "HMULL", argLength: 2, reg: gp21hmul, commutative: true, asm: "IMULL", clobberFlags: true}, // (arg0 * arg1) >> width
{name: "HMULLU", argLength: 2, reg: gp21hmul, commutative: true, asm: "MULL", clobberFlags: true}, // (arg0 * arg1) >> width
{name: "MULLQU", argLength: 2, reg: gp21mul, commutative: true, asm: "MULL", clobberFlags: true}, // arg0 * arg1, high 32 in result[0], low 32 in result[1]
{name: "AVGLU", argLength: 2, reg: gp21, commutative: true, resultInArg0: true, clobberFlags: true}, // (arg0 + arg1) / 2 as unsigned, all 32 result bits
// For DIVL, DIVW, MODL and MODW, AuxInt non-zero means that the divisor has been proved to be not -1.
{name: "DIVL", argLength: 2, reg: gp11div, asm: "IDIVL", aux: "Bool", clobberFlags: true}, // arg0 / arg1
{name: "DIVW", argLength: 2, reg: gp11div, asm: "IDIVW", aux: "Bool", clobberFlags: true}, // arg0 / arg1
{name: "DIVLU", argLength: 2, reg: gp11div, asm: "DIVL", clobberFlags: true}, // arg0 / arg1
{name: "DIVWU", argLength: 2, reg: gp11div, asm: "DIVW", clobberFlags: true}, // arg0 / arg1
{name: "MODL", argLength: 2, reg: gp11mod, asm: "IDIVL", aux: "Bool", clobberFlags: true}, // arg0 % arg1
{name: "MODW", argLength: 2, reg: gp11mod, asm: "IDIVW", aux: "Bool", clobberFlags: true}, // arg0 % arg1
{name: "MODLU", argLength: 2, reg: gp11mod, asm: "DIVL", clobberFlags: true}, // arg0 % arg1
{name: "MODWU", argLength: 2, reg: gp11mod, asm: "DIVW", clobberFlags: true}, // arg0 % arg1
{name: "ANDL", argLength: 2, reg: gp21, asm: "ANDL", commutative: true, resultInArg0: true, clobberFlags: true}, // arg0 & arg1
{name: "ANDLconst", argLength: 1, reg: gp11, asm: "ANDL", aux: "Int32", resultInArg0: true, clobberFlags: true}, // arg0 & auxint
{name: "ORL", argLength: 2, reg: gp21, asm: "ORL", commutative: true, resultInArg0: true, clobberFlags: true}, // arg0 | arg1
{name: "ORLconst", argLength: 1, reg: gp11, asm: "ORL", aux: "Int32", resultInArg0: true, clobberFlags: true}, // arg0 | auxint
{name: "XORL", argLength: 2, reg: gp21, asm: "XORL", commutative: true, resultInArg0: true, clobberFlags: true}, // arg0 ^ arg1
{name: "XORLconst", argLength: 1, reg: gp11, asm: "XORL", aux: "Int32", resultInArg0: true, clobberFlags: true}, // arg0 ^ auxint
{name: "CMPL", argLength: 2, reg: gp2flags, asm: "CMPL", typ: "Flags"}, // arg0 compare to arg1
{name: "CMPW", argLength: 2, reg: gp2flags, asm: "CMPW", typ: "Flags"}, // arg0 compare to arg1
{name: "CMPB", argLength: 2, reg: gp2flags, asm: "CMPB", typ: "Flags"}, // arg0 compare to arg1
{name: "CMPLconst", argLength: 1, reg: gp1flags, asm: "CMPL", typ: "Flags", aux: "Int32"}, // arg0 compare to auxint
{name: "CMPWconst", argLength: 1, reg: gp1flags, asm: "CMPW", typ: "Flags", aux: "Int16"}, // arg0 compare to auxint
{name: "CMPBconst", argLength: 1, reg: gp1flags, asm: "CMPB", typ: "Flags", aux: "Int8"}, // arg0 compare to auxint
// compare *(arg0+auxint+aux) to arg1 (in that order). arg2=mem.
{name: "CMPLload", argLength: 3, reg: gp1flagsLoad, asm: "CMPL", aux: "SymOff", typ: "Flags", symEffect: "Read", faultOnNilArg0: true},
{name: "CMPWload", argLength: 3, reg: gp1flagsLoad, asm: "CMPW", aux: "SymOff", typ: "Flags", symEffect: "Read", faultOnNilArg0: true},
{name: "CMPBload", argLength: 3, reg: gp1flagsLoad, asm: "CMPB", aux: "SymOff", typ: "Flags", symEffect: "Read", faultOnNilArg0: true},
// compare *(arg0+ValAndOff(AuxInt).Off()+aux) to ValAndOff(AuxInt).Val() (in that order). arg1=mem.
{name: "CMPLconstload", argLength: 2, reg: gp0flagsLoad, asm: "CMPL", aux: "SymValAndOff", typ: "Flags", symEffect: "Read", faultOnNilArg0: true},
{name: "CMPWconstload", argLength: 2, reg: gp0flagsLoad, asm: "CMPW", aux: "SymValAndOff", typ: "Flags", symEffect: "Read", faultOnNilArg0: true},
{name: "CMPBconstload", argLength: 2, reg: gp0flagsLoad, asm: "CMPB", aux: "SymValAndOff", typ: "Flags", symEffect: "Read", faultOnNilArg0: true},
{name: "UCOMISS", argLength: 2, reg: fp2flags, asm: "UCOMISS", typ: "Flags", usesScratch: true}, // arg0 compare to arg1, f32
{name: "UCOMISD", argLength: 2, reg: fp2flags, asm: "UCOMISD", typ: "Flags", usesScratch: true}, // arg0 compare to arg1, f64
{name: "TESTL", argLength: 2, reg: gp2flags, commutative: true, asm: "TESTL", typ: "Flags"}, // (arg0 & arg1) compare to 0
{name: "TESTW", argLength: 2, reg: gp2flags, commutative: true, asm: "TESTW", typ: "Flags"}, // (arg0 & arg1) compare to 0
{name: "TESTB", argLength: 2, reg: gp2flags, commutative: true, asm: "TESTB", typ: "Flags"}, // (arg0 & arg1) compare to 0
{name: "TESTLconst", argLength: 1, reg: gp1flags, asm: "TESTL", typ: "Flags", aux: "Int32"}, // (arg0 & auxint) compare to 0
{name: "TESTWconst", argLength: 1, reg: gp1flags, asm: "TESTW", typ: "Flags", aux: "Int16"}, // (arg0 & auxint) compare to 0
{name: "TESTBconst", argLength: 1, reg: gp1flags, asm: "TESTB", typ: "Flags", aux: "Int8"}, // (arg0 & auxint) compare to 0
{name: "SHLL", argLength: 2, reg: gp21shift, asm: "SHLL", resultInArg0: true, clobberFlags: true}, // arg0 << arg1, shift amount is mod 32
{name: "SHLLconst", argLength: 1, reg: gp11, asm: "SHLL", aux: "Int32", resultInArg0: true, clobberFlags: true}, // arg0 << auxint, shift amount 0-31
// Note: x86 is weird, the 16 and 8 byte shifts still use all 5 bits of shift amount!
{name: "SHRL", argLength: 2, reg: gp21shift, asm: "SHRL", resultInArg0: true, clobberFlags: true}, // unsigned arg0 >> arg1, shift amount is mod 32
{name: "SHRW", argLength: 2, reg: gp21shift, asm: "SHRW", resultInArg0: true, clobberFlags: true}, // unsigned arg0 >> arg1, shift amount is mod 32
{name: "SHRB", argLength: 2, reg: gp21shift, asm: "SHRB", resultInArg0: true, clobberFlags: true}, // unsigned arg0 >> arg1, shift amount is mod 32
{name: "SHRLconst", argLength: 1, reg: gp11, asm: "SHRL", aux: "Int32", resultInArg0: true, clobberFlags: true}, // unsigned arg0 >> auxint, shift amount 0-31
{name: "SHRWconst", argLength: 1, reg: gp11, asm: "SHRW", aux: "Int16", resultInArg0: true, clobberFlags: true}, // unsigned arg0 >> auxint, shift amount 0-15
{name: "SHRBconst", argLength: 1, reg: gp11, asm: "SHRB", aux: "Int8", resultInArg0: true, clobberFlags: true}, // unsigned arg0 >> auxint, shift amount 0-7
{name: "SARL", argLength: 2, reg: gp21shift, asm: "SARL", resultInArg0: true, clobberFlags: true}, // signed arg0 >> arg1, shift amount is mod 32
{name: "SARW", argLength: 2, reg: gp21shift, asm: "SARW", resultInArg0: true, clobberFlags: true}, // signed arg0 >> arg1, shift amount is mod 32
{name: "SARB", argLength: 2, reg: gp21shift, asm: "SARB", resultInArg0: true, clobberFlags: true}, // signed arg0 >> arg1, shift amount is mod 32
{name: "SARLconst", argLength: 1, reg: gp11, asm: "SARL", aux: "Int32", resultInArg0: true, clobberFlags: true}, // signed arg0 >> auxint, shift amount 0-31
{name: "SARWconst", argLength: 1, reg: gp11, asm: "SARW", aux: "Int16", resultInArg0: true, clobberFlags: true}, // signed arg0 >> auxint, shift amount 0-15
{name: "SARBconst", argLength: 1, reg: gp11, asm: "SARB", aux: "Int8", resultInArg0: true, clobberFlags: true}, // signed arg0 >> auxint, shift amount 0-7
{name: "ROLLconst", argLength: 1, reg: gp11, asm: "ROLL", aux: "Int32", resultInArg0: true, clobberFlags: true}, // arg0 rotate left auxint, rotate amount 0-31
{name: "ROLWconst", argLength: 1, reg: gp11, asm: "ROLW", aux: "Int16", resultInArg0: true, clobberFlags: true}, // arg0 rotate left auxint, rotate amount 0-15
{name: "ROLBconst", argLength: 1, reg: gp11, asm: "ROLB", aux: "Int8", resultInArg0: true, clobberFlags: true}, // arg0 rotate left auxint, rotate amount 0-7
// binary-op with a memory source operand
{name: "ADDLload", argLength: 3, reg: gp21load, asm: "ADDL", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 + tmp, tmp loaded from arg1+auxint+aux, arg2 = mem
{name: "SUBLload", argLength: 3, reg: gp21load, asm: "SUBL", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 - tmp, tmp loaded from arg1+auxint+aux, arg2 = mem
{name: "MULLload", argLength: 3, reg: gp21load, asm: "IMULL", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 * tmp, tmp loaded from arg1+auxint+aux, arg2 = mem
{name: "ANDLload", argLength: 3, reg: gp21load, asm: "ANDL", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 & tmp, tmp loaded from arg1+auxint+aux, arg2 = mem
{name: "ORLload", argLength: 3, reg: gp21load, asm: "ORL", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 | tmp, tmp loaded from arg1+auxint+aux, arg2 = mem
{name: "XORLload", argLength: 3, reg: gp21load, asm: "XORL", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 ^ tmp, tmp loaded from arg1+auxint+aux, arg2 = mem
// binary-op with an indexed memory source operand
{name: "ADDLloadidx4", argLength: 4, reg: gp21loadidx, asm: "ADDL", aux: "SymOff", resultInArg0: true, clobberFlags: true, symEffect: "Read"}, // arg0 + tmp, tmp loaded from arg1+arg2*4+auxint+aux, arg3 = mem
{name: "SUBLloadidx4", argLength: 4, reg: gp21loadidx, asm: "SUBL", aux: "SymOff", resultInArg0: true, clobberFlags: true, symEffect: "Read"}, // arg0 - tmp, tmp loaded from arg1+arg2*4+auxint+aux, arg3 = mem
{name: "MULLloadidx4", argLength: 4, reg: gp21loadidx, asm: "IMULL", aux: "SymOff", resultInArg0: true, clobberFlags: true, symEffect: "Read"}, // arg0 * tmp, tmp loaded from arg1+arg2*4+auxint+aux, arg3 = mem
{name: "ANDLloadidx4", argLength: 4, reg: gp21loadidx, asm: "ANDL", aux: "SymOff", resultInArg0: true, clobberFlags: true, symEffect: "Read"}, // arg0 & tmp, tmp loaded from arg1+arg2*4+auxint+aux, arg3 = mem
{name: "ORLloadidx4", argLength: 4, reg: gp21loadidx, asm: "ORL", aux: "SymOff", resultInArg0: true, clobberFlags: true, symEffect: "Read"}, // arg0 | tmp, tmp loaded from arg1+arg2*4+auxint+aux, arg3 = mem
{name: "XORLloadidx4", argLength: 4, reg: gp21loadidx, asm: "XORL", aux: "SymOff", resultInArg0: true, clobberFlags: true, symEffect: "Read"}, // arg0 ^ tmp, tmp loaded from arg1+arg2*4+auxint+aux, arg3 = mem
// unary ops
{name: "NEGL", argLength: 1, reg: gp11, asm: "NEGL", resultInArg0: true, clobberFlags: true}, // -arg0
{name: "NOTL", argLength: 1, reg: gp11, asm: "NOTL", resultInArg0: true, clobberFlags: true}, // ^arg0
{name: "BSFL", argLength: 1, reg: gp11, asm: "BSFL", clobberFlags: true}, // arg0 # of low-order zeroes ; undef if zero
{name: "BSFW", argLength: 1, reg: gp11, asm: "BSFW", clobberFlags: true}, // arg0 # of low-order zeroes ; undef if zero
{name: "BSRL", argLength: 1, reg: gp11, asm: "BSRL", clobberFlags: true}, // arg0 # of high-order zeroes ; undef if zero
{name: "BSRW", argLength: 1, reg: gp11, asm: "BSRW", clobberFlags: true}, // arg0 # of high-order zeroes ; undef if zero
{name: "BSWAPL", argLength: 1, reg: gp11, asm: "BSWAPL", resultInArg0: true, clobberFlags: true}, // arg0 swap bytes
{name: "SQRTSD", argLength: 1, reg: fp11, asm: "SQRTSD"}, // sqrt(arg0)
{name: "SBBLcarrymask", argLength: 1, reg: flagsgp, asm: "SBBL"}, // (int32)(-1) if carry is set, 0 if carry is clear.
// Note: SBBW and SBBB are subsumed by SBBL
{name: "SETEQ", argLength: 1, reg: readflags, asm: "SETEQ"}, // extract == condition from arg0
{name: "SETNE", argLength: 1, reg: readflags, asm: "SETNE"}, // extract != condition from arg0
{name: "SETL", argLength: 1, reg: readflags, asm: "SETLT"}, // extract signed < condition from arg0
{name: "SETLE", argLength: 1, reg: readflags, asm: "SETLE"}, // extract signed <= condition from arg0
{name: "SETG", argLength: 1, reg: readflags, asm: "SETGT"}, // extract signed > condition from arg0
{name: "SETGE", argLength: 1, reg: readflags, asm: "SETGE"}, // extract signed >= condition from arg0
{name: "SETB", argLength: 1, reg: readflags, asm: "SETCS"}, // extract unsigned < condition from arg0
{name: "SETBE", argLength: 1, reg: readflags, asm: "SETLS"}, // extract unsigned <= condition from arg0
{name: "SETA", argLength: 1, reg: readflags, asm: "SETHI"}, // extract unsigned > condition from arg0
{name: "SETAE", argLength: 1, reg: readflags, asm: "SETCC"}, // extract unsigned >= condition from arg0
{name: "SETO", argLength: 1, reg: readflags, asm: "SETOS"}, // extract if overflow flag is set from arg0
// Need different opcodes for floating point conditions because
// any comparison involving a NaN is always FALSE and thus
// the patterns for inverting conditions cannot be used.
{name: "SETEQF", argLength: 1, reg: flagsgpax, asm: "SETEQ", clobberFlags: true}, // extract == condition from arg0
{name: "SETNEF", argLength: 1, reg: flagsgpax, asm: "SETNE", clobberFlags: true}, // extract != condition from arg0
{name: "SETORD", argLength: 1, reg: flagsgp, asm: "SETPC"}, // extract "ordered" (No Nan present) condition from arg0
{name: "SETNAN", argLength: 1, reg: flagsgp, asm: "SETPS"}, // extract "unordered" (Nan present) condition from arg0
{name: "SETGF", argLength: 1, reg: flagsgp, asm: "SETHI"}, // extract floating > condition from arg0
{name: "SETGEF", argLength: 1, reg: flagsgp, asm: "SETCC"}, // extract floating >= condition from arg0
{name: "MOVBLSX", argLength: 1, reg: gp11, asm: "MOVBLSX"}, // sign extend arg0 from int8 to int32
{name: "MOVBLZX", argLength: 1, reg: gp11, asm: "MOVBLZX"}, // zero extend arg0 from int8 to int32
{name: "MOVWLSX", argLength: 1, reg: gp11, asm: "MOVWLSX"}, // sign extend arg0 from int16 to int32
{name: "MOVWLZX", argLength: 1, reg: gp11, asm: "MOVWLZX"}, // zero extend arg0 from int16 to int32
{name: "MOVLconst", reg: gp01, asm: "MOVL", typ: "UInt32", aux: "Int32", rematerializeable: true}, // 32 low bits of auxint
{name: "CVTTSD2SL", argLength: 1, reg: fpgp, asm: "CVTTSD2SL", usesScratch: true}, // convert float64 to int32
{name: "CVTTSS2SL", argLength: 1, reg: fpgp, asm: "CVTTSS2SL", usesScratch: true}, // convert float32 to int32
{name: "CVTSL2SS", argLength: 1, reg: gpfp, asm: "CVTSL2SS", usesScratch: true}, // convert int32 to float32
{name: "CVTSL2SD", argLength: 1, reg: gpfp, asm: "CVTSL2SD", usesScratch: true}, // convert int32 to float64
{name: "CVTSD2SS", argLength: 1, reg: fp11, asm: "CVTSD2SS", usesScratch: true}, // convert float64 to float32
{name: "CVTSS2SD", argLength: 1, reg: fp11, asm: "CVTSS2SD"}, // convert float32 to float64
{name: "PXOR", argLength: 2, reg: fp21, asm: "PXOR", commutative: true, resultInArg0: true}, // exclusive or, applied to X regs for float negation.
{name: "LEAL", argLength: 1, reg: gp11sb, aux: "SymOff", rematerializeable: true, symEffect: "Addr"}, // arg0 + auxint + offset encoded in aux
{name: "LEAL1", argLength: 2, reg: gp21sb, commutative: true, aux: "SymOff", symEffect: "Addr"}, // arg0 + arg1 + auxint + aux
{name: "LEAL2", argLength: 2, reg: gp21sb, aux: "SymOff", symEffect: "Addr"}, // arg0 + 2*arg1 + auxint + aux
{name: "LEAL4", argLength: 2, reg: gp21sb, aux: "SymOff", symEffect: "Addr"}, // arg0 + 4*arg1 + auxint + aux
{name: "LEAL8", argLength: 2, reg: gp21sb, aux: "SymOff", symEffect: "Addr"}, // arg0 + 8*arg1 + auxint + aux
// Note: LEAL{1,2,4,8} must not have OpSB as either argument.
// auxint+aux == add auxint and the offset of the symbol in aux (if any) to the effective address
{name: "MOVBload", argLength: 2, reg: gpload, asm: "MOVBLZX", aux: "SymOff", typ: "UInt8", faultOnNilArg0: true, symEffect: "Read"}, // load byte from arg0+auxint+aux. arg1=mem. Zero extend.
{name: "MOVBLSXload", argLength: 2, reg: gpload, asm: "MOVBLSX", aux: "SymOff", faultOnNilArg0: true, symEffect: "Read"}, // ditto, sign extend to int32
{name: "MOVWload", argLength: 2, reg: gpload, asm: "MOVWLZX", aux: "SymOff", typ: "UInt16", faultOnNilArg0: true, symEffect: "Read"}, // load 2 bytes from arg0+auxint+aux. arg1=mem. Zero extend.
{name: "MOVWLSXload", argLength: 2, reg: gpload, asm: "MOVWLSX", aux: "SymOff", faultOnNilArg0: true, symEffect: "Read"}, // ditto, sign extend to int32
{name: "MOVLload", argLength: 2, reg: gpload, asm: "MOVL", aux: "SymOff", typ: "UInt32", faultOnNilArg0: true, symEffect: "Read"}, // load 4 bytes from arg0+auxint+aux. arg1=mem. Zero extend.
{name: "MOVBstore", argLength: 3, reg: gpstore, asm: "MOVB", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store byte in arg1 to arg0+auxint+aux. arg2=mem
{name: "MOVWstore", argLength: 3, reg: gpstore, asm: "MOVW", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store 2 bytes in arg1 to arg0+auxint+aux. arg2=mem
{name: "MOVLstore", argLength: 3, reg: gpstore, asm: "MOVL", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store 4 bytes in arg1 to arg0+auxint+aux. arg2=mem
// direct binary-op on memory (read-modify-write)
{name: "ADDLmodify", argLength: 3, reg: gpstore, asm: "ADDL", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+auxint+aux) += arg1, arg2=mem
{name: "SUBLmodify", argLength: 3, reg: gpstore, asm: "SUBL", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+auxint+aux) -= arg1, arg2=mem
{name: "ANDLmodify", argLength: 3, reg: gpstore, asm: "ANDL", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+auxint+aux) &= arg1, arg2=mem
{name: "ORLmodify", argLength: 3, reg: gpstore, asm: "ORL", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+auxint+aux) |= arg1, arg2=mem
{name: "XORLmodify", argLength: 3, reg: gpstore, asm: "XORL", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+auxint+aux) ^= arg1, arg2=mem
// direct binary-op on indexed memory (read-modify-write)
{name: "ADDLmodifyidx4", argLength: 4, reg: gpstoreidx, asm: "ADDL", aux: "SymOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+arg1*4+auxint+aux) += arg2, arg3=mem
{name: "SUBLmodifyidx4", argLength: 4, reg: gpstoreidx, asm: "SUBL", aux: "SymOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+arg1*4+auxint+aux) -= arg2, arg3=mem
{name: "ANDLmodifyidx4", argLength: 4, reg: gpstoreidx, asm: "ANDL", aux: "SymOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+arg1*4+auxint+aux) &= arg2, arg3=mem
{name: "ORLmodifyidx4", argLength: 4, reg: gpstoreidx, asm: "ORL", aux: "SymOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+arg1*4+auxint+aux) |= arg2, arg3=mem
{name: "XORLmodifyidx4", argLength: 4, reg: gpstoreidx, asm: "XORL", aux: "SymOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // *(arg0+arg1*4+auxint+aux) ^= arg2, arg3=mem
// direct binary-op on memory with a constant (read-modify-write)
{name: "ADDLconstmodify", argLength: 2, reg: gpstoreconst, asm: "ADDL", aux: "SymValAndOff", typ: "Mem", clobberFlags: true, faultOnNilArg0: true, symEffect: "Read,Write"}, // add ValAndOff(AuxInt).Val() to arg0+ValAndOff(AuxInt).Off()+aux, arg1=mem
{name: "ANDLconstmodify", argLength: 2, reg: gpstoreconst, asm: "ANDL", aux: "SymValAndOff", typ: "Mem", clobberFlags: true, faultOnNilArg0: true, symEffect: "Read,Write"}, // and ValAndOff(AuxInt).Val() to arg0+ValAndOff(AuxInt).Off()+aux, arg1=mem
{name: "ORLconstmodify", argLength: 2, reg: gpstoreconst, asm: "ORL", aux: "SymValAndOff", typ: "Mem", clobberFlags: true, faultOnNilArg0: true, symEffect: "Read,Write"}, // or ValAndOff(AuxInt).Val() to arg0+ValAndOff(AuxInt).Off()+aux, arg1=mem
{name: "XORLconstmodify", argLength: 2, reg: gpstoreconst, asm: "XORL", aux: "SymValAndOff", typ: "Mem", clobberFlags: true, faultOnNilArg0: true, symEffect: "Read,Write"}, // xor ValAndOff(AuxInt).Val() to arg0+ValAndOff(AuxInt).Off()+aux, arg1=mem
// direct binary-op on indexed memory with a constant (read-modify-write)
{name: "ADDLconstmodifyidx4", argLength: 3, reg: gpstoreconstidx, asm: "ADDL", aux: "SymValAndOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // add ValAndOff(AuxInt).Val() to arg0+arg1*4+ValAndOff(AuxInt).Off()+aux, arg2=mem
{name: "ANDLconstmodifyidx4", argLength: 3, reg: gpstoreconstidx, asm: "ANDL", aux: "SymValAndOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // and ValAndOff(AuxInt).Val() to arg0+arg1*4+ValAndOff(AuxInt).Off()+aux, arg2=mem
{name: "ORLconstmodifyidx4", argLength: 3, reg: gpstoreconstidx, asm: "ORL", aux: "SymValAndOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // or ValAndOff(AuxInt).Val() to arg0+arg1*4+ValAndOff(AuxInt).Off()+aux, arg2=mem
{name: "XORLconstmodifyidx4", argLength: 3, reg: gpstoreconstidx, asm: "XORL", aux: "SymValAndOff", typ: "Mem", clobberFlags: true, symEffect: "Read,Write"}, // xor ValAndOff(AuxInt).Val() to arg0+arg1*4+ValAndOff(AuxInt).Off()+aux, arg2=mem
// indexed loads/stores
{name: "MOVBloadidx1", argLength: 3, reg: gploadidx, commutative: true, asm: "MOVBLZX", aux: "SymOff", symEffect: "Read"}, // load a byte from arg0+arg1+auxint+aux. arg2=mem
{name: "MOVWloadidx1", argLength: 3, reg: gploadidx, commutative: true, asm: "MOVWLZX", aux: "SymOff", symEffect: "Read"}, // load 2 bytes from arg0+arg1+auxint+aux. arg2=mem
{name: "MOVWloadidx2", argLength: 3, reg: gploadidx, asm: "MOVWLZX", aux: "SymOff", symEffect: "Read"}, // load 2 bytes from arg0+2*arg1+auxint+aux. arg2=mem
{name: "MOVLloadidx1", argLength: 3, reg: gploadidx, commutative: true, asm: "MOVL", aux: "SymOff", symEffect: "Read"}, // load 4 bytes from arg0+arg1+auxint+aux. arg2=mem
{name: "MOVLloadidx4", argLength: 3, reg: gploadidx, asm: "MOVL", aux: "SymOff", symEffect: "Read"}, // load 4 bytes from arg0+4*arg1+auxint+aux. arg2=mem
// TODO: sign-extending indexed loads
{name: "MOVBstoreidx1", argLength: 4, reg: gpstoreidx, commutative: true, asm: "MOVB", aux: "SymOff", symEffect: "Write"}, // store byte in arg2 to arg0+arg1+auxint+aux. arg3=mem
{name: "MOVWstoreidx1", argLength: 4, reg: gpstoreidx, commutative: true, asm: "MOVW", aux: "SymOff", symEffect: "Write"}, // store 2 bytes in arg2 to arg0+arg1+auxint+aux. arg3=mem
{name: "MOVWstoreidx2", argLength: 4, reg: gpstoreidx, asm: "MOVW", aux: "SymOff", symEffect: "Write"}, // store 2 bytes in arg2 to arg0+2*arg1+auxint+aux. arg3=mem
{name: "MOVLstoreidx1", argLength: 4, reg: gpstoreidx, commutative: true, asm: "MOVL", aux: "SymOff", symEffect: "Write"}, // store 4 bytes in arg2 to arg0+arg1+auxint+aux. arg3=mem
{name: "MOVLstoreidx4", argLength: 4, reg: gpstoreidx, asm: "MOVL", aux: "SymOff", symEffect: "Write"}, // store 4 bytes in arg2 to arg0+4*arg1+auxint+aux. arg3=mem
// TODO: add size-mismatched indexed loads, like MOVBstoreidx4.
// For storeconst ops, the AuxInt field encodes both
// the value to store and an address offset of the store.
// Cast AuxInt to a ValAndOff to extract Val and Off fields.
{name: "MOVBstoreconst", argLength: 2, reg: gpstoreconst, asm: "MOVB", aux: "SymValAndOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store low byte of ValAndOff(AuxInt).Val() to arg0+ValAndOff(AuxInt).Off()+aux. arg1=mem
{name: "MOVWstoreconst", argLength: 2, reg: gpstoreconst, asm: "MOVW", aux: "SymValAndOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store low 2 bytes of ...
{name: "MOVLstoreconst", argLength: 2, reg: gpstoreconst, asm: "MOVL", aux: "SymValAndOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store low 4 bytes of ...
{name: "MOVBstoreconstidx1", argLength: 3, reg: gpstoreconstidx, asm: "MOVB", aux: "SymValAndOff", typ: "Mem", symEffect: "Write"}, // store low byte of ValAndOff(AuxInt).Val() to arg0+1*arg1+ValAndOff(AuxInt).Off()+aux. arg2=mem
{name: "MOVWstoreconstidx1", argLength: 3, reg: gpstoreconstidx, asm: "MOVW", aux: "SymValAndOff", typ: "Mem", symEffect: "Write"}, // store low 2 bytes of ... arg1 ...
{name: "MOVWstoreconstidx2", argLength: 3, reg: gpstoreconstidx, asm: "MOVW", aux: "SymValAndOff", typ: "Mem", symEffect: "Write"}, // store low 2 bytes of ... 2*arg1 ...
{name: "MOVLstoreconstidx1", argLength: 3, reg: gpstoreconstidx, asm: "MOVL", aux: "SymValAndOff", typ: "Mem", symEffect: "Write"}, // store low 4 bytes of ... arg1 ...
{name: "MOVLstoreconstidx4", argLength: 3, reg: gpstoreconstidx, asm: "MOVL", aux: "SymValAndOff", typ: "Mem", symEffect: "Write"}, // store low 4 bytes of ... 4*arg1 ...
// arg0 = pointer to start of memory to zero
// arg1 = value to store (will always be zero)
// arg2 = mem
// auxint = offset into duffzero code to start executing
// returns mem
{
name: "DUFFZERO",
aux: "Int64",
argLength: 3,
reg: regInfo{
inputs: []regMask{buildReg("DI"), buildReg("AX")},
clobbers: buildReg("DI CX"),
// Note: CX is only clobbered when dynamic linking.
},
faultOnNilArg0: true,
},
// arg0 = address of memory to zero
// arg1 = # of 4-byte words to zero
// arg2 = value to store (will always be zero)
// arg3 = mem
// returns mem
{
name: "REPSTOSL",
argLength: 4,
reg: regInfo{
inputs: []regMask{buildReg("DI"), buildReg("CX"), buildReg("AX")},
clobbers: buildReg("DI CX"),
},
faultOnNilArg0: true,
},
{name: "CALLstatic", argLength: 1, reg: regInfo{clobbers: callerSave}, aux: "CallOff", clobberFlags: true, call: true}, // call static function aux.(*obj.LSym). arg0=mem, auxint=argsize, returns mem
{name: "CALLclosure", argLength: 3, reg: regInfo{inputs: []regMask{gpsp, buildReg("DX"), 0}, clobbers: callerSave}, aux: "CallOff", clobberFlags: true, call: true}, // call function via closure. arg0=codeptr, arg1=closure, arg2=mem, auxint=argsize, returns mem
{name: "CALLinter", argLength: 2, reg: regInfo{inputs: []regMask{gp}, clobbers: callerSave}, aux: "CallOff", clobberFlags: true, call: true}, // call fn by pointer. arg0=codeptr, arg1=mem, auxint=argsize, returns mem
// arg0 = destination pointer
// arg1 = source pointer
// arg2 = mem
// auxint = offset from duffcopy symbol to call
// returns memory
{
name: "DUFFCOPY",
aux: "Int64",
argLength: 3,
reg: regInfo{
inputs: []regMask{buildReg("DI"), buildReg("SI")},
clobbers: buildReg("DI SI CX"), // uses CX as a temporary
},
clobberFlags: true,
faultOnNilArg0: true,
faultOnNilArg1: true,
},
// arg0 = destination pointer
// arg1 = source pointer
// arg2 = # of 8-byte words to copy
// arg3 = mem
// returns memory
{
name: "REPMOVSL",
argLength: 4,
reg: regInfo{
inputs: []regMask{buildReg("DI"), buildReg("SI"), buildReg("CX")},
clobbers: buildReg("DI SI CX"),
},
faultOnNilArg0: true,
faultOnNilArg1: true,
},
// (InvertFlags (CMPL a b)) == (CMPL b a)
// So if we want (SETL (CMPL a b)) but we can't do that because a is a constant,
// then we do (SETL (InvertFlags (CMPL b a))) instead.
// Rewrites will convert this to (SETG (CMPL b a)).
// InvertFlags is a pseudo-op which can't appear in assembly output.
{name: "InvertFlags", argLength: 1}, // reverse direction of arg0
// Pseudo-ops
{name: "LoweredGetG", argLength: 1, reg: gp01}, // arg0=mem
// Scheduler ensures LoweredGetClosurePtr occurs only in entry block,
// and sorts it to the very beginning of the block to prevent other
// use of DX (the closure pointer)
{name: "LoweredGetClosurePtr", reg: regInfo{outputs: []regMask{buildReg("DX")}}, zeroWidth: true},
// LoweredGetCallerPC evaluates to the PC to which its "caller" will return.
// I.e., if f calls g "calls" getcallerpc,
// the result should be the PC within f that g will return to.
// See runtime/stubs.go for a more detailed discussion.
{name: "LoweredGetCallerPC", reg: gp01, rematerializeable: true},
// LoweredGetCallerSP returns the SP of the caller of the current function.
{name: "LoweredGetCallerSP", reg: gp01, rematerializeable: true},
//arg0=ptr,arg1=mem, returns void. Faults if ptr is nil.
{name: "LoweredNilCheck", argLength: 2, reg: regInfo{inputs: []regMask{gpsp}}, clobberFlags: true, nilCheck: true, faultOnNilArg0: true},
// LoweredWB invokes runtime.gcWriteBarrier. arg0=destptr, arg1=srcptr, arg2=mem, aux=runtime.gcWriteBarrier
// It saves all GP registers if necessary, but may clobber others.
{name: "LoweredWB", argLength: 3, reg: regInfo{inputs: []regMask{buildReg("DI"), ax}, clobbers: callerSave &^ gp}, clobberFlags: true, aux: "Sym", symEffect: "None"},
// There are three of these functions so that they can have three different register inputs.
// When we check 0 <= c <= cap (A), then 0 <= b <= c (B), then 0 <= a <= b (C), we want the
// default registers to match so we don't need to copy registers around unnecessarily.
{name: "LoweredPanicBoundsA", argLength: 3, aux: "Int64", reg: regInfo{inputs: []regMask{dx, bx}}, typ: "Mem", call: true}, // arg0=idx, arg1=len, arg2=mem, returns memory. AuxInt contains report code (see PanicBounds in genericOps.go).
{name: "LoweredPanicBoundsB", argLength: 3, aux: "Int64", reg: regInfo{inputs: []regMask{cx, dx}}, typ: "Mem", call: true}, // arg0=idx, arg1=len, arg2=mem, returns memory. AuxInt contains report code (see PanicBounds in genericOps.go).
{name: "LoweredPanicBoundsC", argLength: 3, aux: "Int64", reg: regInfo{inputs: []regMask{ax, cx}}, typ: "Mem", call: true}, // arg0=idx, arg1=len, arg2=mem, returns memory. AuxInt contains report code (see PanicBounds in genericOps.go).
// Extend ops are the same as Bounds ops except the indexes are 64-bit.
{name: "LoweredPanicExtendA", argLength: 4, aux: "Int64", reg: regInfo{inputs: []regMask{si, dx, bx}}, typ: "Mem", call: true}, // arg0=idxHi, arg1=idxLo, arg2=len, arg3=mem, returns memory. AuxInt contains report code (see PanicExtend in genericOps.go).
{name: "LoweredPanicExtendB", argLength: 4, aux: "Int64", reg: regInfo{inputs: []regMask{si, cx, dx}}, typ: "Mem", call: true}, // arg0=idxHi, arg1=idxLo, arg2=len, arg3=mem, returns memory. AuxInt contains report code (see PanicExtend in genericOps.go).
{name: "LoweredPanicExtendC", argLength: 4, aux: "Int64", reg: regInfo{inputs: []regMask{si, ax, cx}}, typ: "Mem", call: true}, // arg0=idxHi, arg1=idxLo, arg2=len, arg3=mem, returns memory. AuxInt contains report code (see PanicExtend in genericOps.go).
// Constant flag values. For any comparison, there are 5 possible
// outcomes: the three from the signed total order (<,==,>) and the
// three from the unsigned total order. The == cases overlap.
// Note: there's a sixth "unordered" outcome for floating-point
// comparisons, but we don't use such a beast yet.
// These ops are for temporary use by rewrite rules. They
// cannot appear in the generated assembly.
{name: "FlagEQ"}, // equal
{name: "FlagLT_ULT"}, // signed < and unsigned <
{name: "FlagLT_UGT"}, // signed < and unsigned >
{name: "FlagGT_UGT"}, // signed > and unsigned <
{name: "FlagGT_ULT"}, // signed > and unsigned >
// Special op for -x on 387
{name: "FCHS", argLength: 1, reg: fp11},
// Special ops for PIC floating-point constants.
// MOVSXconst1 loads the address of the constant-pool entry into a register.
// MOVSXconst2 loads the constant from that address.
// MOVSXconst1 returns a pointer, but we type it as uint32 because it can never point to the Go heap.
{name: "MOVSSconst1", reg: gp01, typ: "UInt32", aux: "Float32"},
{name: "MOVSDconst1", reg: gp01, typ: "UInt32", aux: "Float64"},
{name: "MOVSSconst2", argLength: 1, reg: gpfp, asm: "MOVSS"},
{name: "MOVSDconst2", argLength: 1, reg: gpfp, asm: "MOVSD"},
}
var _386blocks = []blockData{
{name: "EQ", controls: 1},
{name: "NE", controls: 1},
{name: "LT", controls: 1},
{name: "LE", controls: 1},
{name: "GT", controls: 1},
{name: "GE", controls: 1},
{name: "OS", controls: 1},
{name: "OC", controls: 1},
{name: "ULT", controls: 1},
{name: "ULE", controls: 1},
{name: "UGT", controls: 1},
{name: "UGE", controls: 1},
{name: "EQF", controls: 1},
{name: "NEF", controls: 1},
{name: "ORD", controls: 1}, // FP, ordered comparison (parity zero)
{name: "NAN", controls: 1}, // FP, unordered comparison (parity one)
}
archs = append(archs, arch{
name: "386",
pkg: "cmd/internal/obj/x86",
genfile: "../../x86/ssa.go",
ops: _386ops,
blocks: _386blocks,
regnames: regNames386,
gpregmask: gp,
fpregmask: fp,
framepointerreg: int8(num["BP"]),
linkreg: -1, // not used
})
}