// Copyright 2011 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.

package runtime

import (
	"internal/abi"
	"internal/runtime/atomic"
	"unsafe"
)

type mOS struct {
	waitsemacount uint32
}

const (
	_ESRCH       = 3
	_EWOULDBLOCK = _EAGAIN
	_ENOTSUP     = 91

	// From OpenBSD's sys/time.h
	_CLOCK_REALTIME  = 0
	_CLOCK_VIRTUAL   = 1
	_CLOCK_PROF      = 2
	_CLOCK_MONOTONIC = 3
)

type sigset uint32

var sigset_all = ^sigset(0)

// From OpenBSD's <sys/sysctl.h>
const (
	_CTL_HW        = 6
	_HW_NCPU       = 3
	_HW_PAGESIZE   = 7
	_HW_NCPUONLINE = 25
)

func sysctlInt(mib []uint32) (int32, bool) {
	var out int32
	nout := unsafe.Sizeof(out)
	ret := sysctl(&mib[0], uint32(len(mib)), (*byte)(unsafe.Pointer(&out)), &nout, nil, 0)
	if ret < 0 {
		return 0, false
	}
	return out, true
}

func sysctlUint64(mib []uint32) (uint64, bool) {
	var out uint64
	nout := unsafe.Sizeof(out)
	ret := sysctl(&mib[0], uint32(len(mib)), (*byte)(unsafe.Pointer(&out)), &nout, nil, 0)
	if ret < 0 {
		return 0, false
	}
	return out, true
}

//go:linkname internal_cpu_sysctlUint64 internal/cpu.sysctlUint64
func internal_cpu_sysctlUint64(mib []uint32) (uint64, bool) {
	return sysctlUint64(mib)
}

func getCPUCount() int32 {
	// Try hw.ncpuonline first because hw.ncpu would report a number twice as
	// high as the actual CPUs running on OpenBSD 6.4 with hyperthreading
	// disabled (hw.smt=0). See https://golang.org/issue/30127
	if n, ok := sysctlInt([]uint32{_CTL_HW, _HW_NCPUONLINE}); ok {
		return int32(n)
	}
	if n, ok := sysctlInt([]uint32{_CTL_HW, _HW_NCPU}); ok {
		return int32(n)
	}
	return 1
}

func getPageSize() uintptr {
	if ps, ok := sysctlInt([]uint32{_CTL_HW, _HW_PAGESIZE}); ok {
		return uintptr(ps)
	}
	return 0
}

//go:nosplit
func semacreate(mp *m) {
}

//go:nosplit
func semasleep(ns int64) int32 {
	gp := getg()

	// Compute sleep deadline.
	var tsp *timespec
	if ns >= 0 {
		var ts timespec
		ts.setNsec(ns + nanotime())
		tsp = &ts
	}

	for {
		v := atomic.Load(&gp.m.waitsemacount)
		if v > 0 {
			if atomic.Cas(&gp.m.waitsemacount, v, v-1) {
				return 0 // semaphore acquired
			}
			continue
		}

		// Sleep until woken by semawakeup or timeout; or abort if waitsemacount != 0.
		//
		// From OpenBSD's __thrsleep(2) manual:
		// "The abort argument, if not NULL, points to an int that will
		// be examined [...] immediately before blocking. If that int
		// is non-zero then __thrsleep() will immediately return EINTR
		// without blocking."
		ret := thrsleep(uintptr(unsafe.Pointer(&gp.m.waitsemacount)), _CLOCK_MONOTONIC, tsp, 0, &gp.m.waitsemacount)
		if ret == _EWOULDBLOCK {
			return -1
		}
	}
}

//go:nosplit
func semawakeup(mp *m) {
	atomic.Xadd(&mp.waitsemacount, 1)
	ret := thrwakeup(uintptr(unsafe.Pointer(&mp.waitsemacount)), 1)
	if ret != 0 && ret != _ESRCH {
		// semawakeup can be called on signal stack.
		systemstack(func() {
			print("thrwakeup addr=", &mp.waitsemacount, " sem=", mp.waitsemacount, " ret=", ret, "\n")
		})
	}
}

// mstart_stub provides glue code to call mstart from pthread_create.
func mstart_stub()

// May run with m.p==nil, so write barriers are not allowed.
//
//go:nowritebarrierrec
func newosproc(mp *m) {
	if false {
		print("newosproc m=", mp, " g=", mp.g0, " id=", mp.id, " ostk=", &mp, "\n")
	}

	// Initialize an attribute object.
	var attr pthreadattr
	if err := pthread_attr_init(&attr); err != 0 {
		writeErrStr(failthreadcreate)
		exit(1)
	}

	// Find out OS stack size for our own stack guard.
	var stacksize uintptr
	if pthread_attr_getstacksize(&attr, &stacksize) != 0 {
		writeErrStr(failthreadcreate)
		exit(1)
	}
	mp.g0.stack.hi = stacksize // for mstart

	// Tell the pthread library we won't join with this thread.
	if pthread_attr_setdetachstate(&attr, _PTHREAD_CREATE_DETACHED) != 0 {
		writeErrStr(failthreadcreate)
		exit(1)
	}

	// Finally, create the thread. It starts at mstart_stub, which does some low-level
	// setup and then calls mstart.
	var oset sigset
	sigprocmask(_SIG_SETMASK, &sigset_all, &oset)
	err := retryOnEAGAIN(func() int32 {
		return pthread_create(&attr, abi.FuncPCABI0(mstart_stub), unsafe.Pointer(mp))
	})
	sigprocmask(_SIG_SETMASK, &oset, nil)
	if err != 0 {
		writeErrStr(failthreadcreate)
		exit(1)
	}

	pthread_attr_destroy(&attr)
}

func osinit() {
	numCPUStartup = getCPUCount()
	physPageSize = getPageSize()
}

// TODO(#69781): set startupRand using the .openbsd.randomdata ELF section.
// See SPECS.randomdata.

var urandom_dev = []byte("/dev/urandom\x00")

//go:nosplit
func readRandom(r []byte) int {
	fd := open(&urandom_dev[0], 0 /* O_RDONLY */, 0)
	n := read(fd, unsafe.Pointer(&r[0]), int32(len(r)))
	closefd(fd)
	return int(n)
}

func goenvs() {
	goenvs_unix()
}

// Called to initialize a new m (including the bootstrap m).
// Called on the parent thread (main thread in case of bootstrap), can allocate memory.
func mpreinit(mp *m) {
	gsignalSize := int32(32 * 1024)
	mp.gsignal = malg(gsignalSize)
	mp.gsignal.m = mp
}

// Called to initialize a new m (including the bootstrap m).
// Called on the new thread, can not allocate memory.
func minit() {
	getg().m.procid = uint64(getthrid())
	minitSignals()
}

// Called from dropm to undo the effect of an minit.
//
//go:nosplit
func unminit() {
	unminitSignals()
	getg().m.procid = 0
}

// Called from mexit, but not from dropm, to undo the effect of thread-owned
// resources in minit, semacreate, or elsewhere. Do not take locks after calling this.
//
// This always runs without a P, so //go:nowritebarrierrec is required.
//
//go:nowritebarrierrec
func mdestroy(mp *m) {
}

func sigtramp()

type sigactiont struct {
	sa_sigaction uintptr
	sa_mask      uint32
	sa_flags     int32
}

//go:nosplit
//go:nowritebarrierrec
func setsig(i uint32, fn uintptr) {
	var sa sigactiont
	sa.sa_flags = _SA_SIGINFO | _SA_ONSTACK | _SA_RESTART
	sa.sa_mask = uint32(sigset_all)
	if fn == abi.FuncPCABIInternal(sighandler) { // abi.FuncPCABIInternal(sighandler) matches the callers in signal_unix.go
		fn = abi.FuncPCABI0(sigtramp)
	}
	sa.sa_sigaction = fn
	sigaction(i, &sa, nil)
}

//go:nosplit
//go:nowritebarrierrec
func setsigstack(i uint32) {
	throw("setsigstack")
}

//go:nosplit
//go:nowritebarrierrec
func getsig(i uint32) uintptr {
	var sa sigactiont
	sigaction(i, nil, &sa)
	return sa.sa_sigaction
}

// setSignalstackSP sets the ss_sp field of a stackt.
//
//go:nosplit
func setSignalstackSP(s *stackt, sp uintptr) {
	s.ss_sp = sp
}

//go:nosplit
//go:nowritebarrierrec
func sigaddset(mask *sigset, i int) {
	*mask |= 1 << (uint32(i) - 1)
}

func sigdelset(mask *sigset, i int) {
	*mask &^= 1 << (uint32(i) - 1)
}

//go:nosplit
func (c *sigctxt) fixsigcode(sig uint32) {
}

func setProcessCPUProfiler(hz int32) {
	setProcessCPUProfilerTimer(hz)
}

func setThreadCPUProfiler(hz int32) {
	setThreadCPUProfilerHz(hz)
}

//go:nosplit
func validSIGPROF(mp *m, c *sigctxt) bool {
	return true
}

func osStackAlloc(s *mspan) {
	osStackRemap(s, _MAP_STACK)
}

func osStackFree(s *mspan) {
	// Undo MAP_STACK.
	osStackRemap(s, 0)
}

func osStackRemap(s *mspan, flags int32) {
	a, err := mmap(unsafe.Pointer(s.base()), s.npages*pageSize, _PROT_READ|_PROT_WRITE, _MAP_PRIVATE|_MAP_ANON|_MAP_FIXED|flags, -1, 0)
	if err != 0 || uintptr(a) != s.base() {
		print("runtime: remapping stack memory ", hex(s.base()), " ", s.npages*pageSize, " a=", a, " err=", err, "\n")
		throw("remapping stack memory failed")
	}
}

//go:nosplit
func raise(sig uint32) {
	thrkill(getthrid(), int(sig))
}

func signalM(mp *m, sig int) {
	thrkill(int32(mp.procid), sig)
}

// sigPerThreadSyscall is only used on linux, so we assign a bogus signal
// number.
const sigPerThreadSyscall = 1 << 31

//go:nosplit
func runPerThreadSyscall() {
	throw("runPerThreadSyscall only valid on linux")
}