// Copyright 2014 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.

package sha3

// This implementation is only used for NewLegacyKeccak256 and
// NewLegacyKeccak512, which are not implemented by crypto/sha3.
// All other functions in this package are wrappers around crypto/sha3.

import (
	"crypto/subtle"
	"encoding/binary"
	"errors"
	"hash"
	"unsafe"

	"golang.org/x/sys/cpu"
)

const (
	dsbyteKeccak = 0b00000001

	// rateK[c] is the rate in bytes for Keccak[c] where c is the capacity in
	// bits. Given the sponge size is 1600 bits, the rate is 1600 - c bits.
	rateK256  = (1600 - 256) / 8
	rateK512  = (1600 - 512) / 8
	rateK1024 = (1600 - 1024) / 8
)

// NewLegacyKeccak256 creates a new Keccak-256 hash.
//
// Only use this function if you require compatibility with an existing cryptosystem
// that uses non-standard padding. All other users should use New256 instead.
func NewLegacyKeccak256() hash.Hash {
	return &state{rate: rateK512, outputLen: 32, dsbyte: dsbyteKeccak}
}

// NewLegacyKeccak512 creates a new Keccak-512 hash.
//
// Only use this function if you require compatibility with an existing cryptosystem
// that uses non-standard padding. All other users should use New512 instead.
func NewLegacyKeccak512() hash.Hash {
	return &state{rate: rateK1024, outputLen: 64, dsbyte: dsbyteKeccak}
}

// spongeDirection indicates the direction bytes are flowing through the sponge.
type spongeDirection int

const (
	// spongeAbsorbing indicates that the sponge is absorbing input.
	spongeAbsorbing spongeDirection = iota
	// spongeSqueezing indicates that the sponge is being squeezed.
	spongeSqueezing
)

type state struct {
	a [1600 / 8]byte // main state of the hash

	// a[n:rate] is the buffer. If absorbing, it's the remaining space to XOR
	// into before running the permutation. If squeezing, it's the remaining
	// output to produce before running the permutation.
	n, rate int

	// dsbyte contains the "domain separation" bits and the first bit of
	// the padding. Sections 6.1 and 6.2 of [1] separate the outputs of the
	// SHA-3 and SHAKE functions by appending bitstrings to the message.
	// Using a little-endian bit-ordering convention, these are "01" for SHA-3
	// and "1111" for SHAKE, or 00000010b and 00001111b, respectively. Then the
	// padding rule from section 5.1 is applied to pad the message to a multiple
	// of the rate, which involves adding a "1" bit, zero or more "0" bits, and
	// a final "1" bit. We merge the first "1" bit from the padding into dsbyte,
	// giving 00000110b (0x06) and 00011111b (0x1f).
	// [1] http://csrc.nist.gov/publications/drafts/fips-202/fips_202_draft.pdf
	//     "Draft FIPS 202: SHA-3 Standard: Permutation-Based Hash and
	//      Extendable-Output Functions (May 2014)"
	dsbyte byte

	outputLen int             // the default output size in bytes
	state     spongeDirection // whether the sponge is absorbing or squeezing
}

// BlockSize returns the rate of sponge underlying this hash function.
func (d *state) BlockSize() int { return d.rate }

// Size returns the output size of the hash function in bytes.
func (d *state) Size() int { return d.outputLen }

// Reset clears the internal state by zeroing the sponge state and
// the buffer indexes, and setting Sponge.state to absorbing.
func (d *state) Reset() {
	// Zero the permutation's state.
	for i := range d.a {
		d.a[i] = 0
	}
	d.state = spongeAbsorbing
	d.n = 0
}

func (d *state) clone() *state {
	ret := *d
	return &ret
}

// permute applies the KeccakF-1600 permutation.
func (d *state) permute() {
	var a *[25]uint64
	if cpu.IsBigEndian {
		a = new([25]uint64)
		for i := range a {
			a[i] = binary.LittleEndian.Uint64(d.a[i*8:])
		}
	} else {
		a = (*[25]uint64)(unsafe.Pointer(&d.a))
	}

	keccakF1600(a)
	d.n = 0

	if cpu.IsBigEndian {
		for i := range a {
			binary.LittleEndian.PutUint64(d.a[i*8:], a[i])
		}
	}
}

// pads appends the domain separation bits in dsbyte, applies
// the multi-bitrate 10..1 padding rule, and permutes the state.
func (d *state) padAndPermute() {
	// Pad with this instance's domain-separator bits. We know that there's
	// at least one byte of space in the sponge because, if it were full,
	// permute would have been called to empty it. dsbyte also contains the
	// first one bit for the padding. See the comment in the state struct.
	d.a[d.n] ^= d.dsbyte
	// This adds the final one bit for the padding. Because of the way that
	// bits are numbered from the LSB upwards, the final bit is the MSB of
	// the last byte.
	d.a[d.rate-1] ^= 0x80
	// Apply the permutation
	d.permute()
	d.state = spongeSqueezing
}

// Write absorbs more data into the hash's state. It panics if any
// output has already been read.
func (d *state) Write(p []byte) (n int, err error) {
	if d.state != spongeAbsorbing {
		panic("sha3: Write after Read")
	}

	n = len(p)

	for len(p) > 0 {
		x := subtle.XORBytes(d.a[d.n:d.rate], d.a[d.n:d.rate], p)
		d.n += x
		p = p[x:]

		// If the sponge is full, apply the permutation.
		if d.n == d.rate {
			d.permute()
		}
	}

	return
}

// Read squeezes an arbitrary number of bytes from the sponge.
func (d *state) Read(out []byte) (n int, err error) {
	// If we're still absorbing, pad and apply the permutation.
	if d.state == spongeAbsorbing {
		d.padAndPermute()
	}

	n = len(out)

	// Now, do the squeezing.
	for len(out) > 0 {
		// Apply the permutation if we've squeezed the sponge dry.
		if d.n == d.rate {
			d.permute()
		}

		x := copy(out, d.a[d.n:d.rate])
		d.n += x
		out = out[x:]
	}

	return
}

// Sum applies padding to the hash state and then squeezes out the desired
// number of output bytes. It panics if any output has already been read.
func (d *state) Sum(in []byte) []byte {
	if d.state != spongeAbsorbing {
		panic("sha3: Sum after Read")
	}

	// Make a copy of the original hash so that caller can keep writing
	// and summing.
	dup := d.clone()
	hash := make([]byte, dup.outputLen, 64) // explicit cap to allow stack allocation
	dup.Read(hash)
	return append(in, hash...)
}

const (
	magicKeccak = "sha\x0b"
	// magic || rate || main state || n || sponge direction
	marshaledSize = len(magicKeccak) + 1 + 200 + 1 + 1
)

func (d *state) MarshalBinary() ([]byte, error) {
	return d.AppendBinary(make([]byte, 0, marshaledSize))
}

func (d *state) AppendBinary(b []byte) ([]byte, error) {
	switch d.dsbyte {
	case dsbyteKeccak:
		b = append(b, magicKeccak...)
	default:
		panic("unknown dsbyte")
	}
	// rate is at most 168, and n is at most rate.
	b = append(b, byte(d.rate))
	b = append(b, d.a[:]...)
	b = append(b, byte(d.n), byte(d.state))
	return b, nil
}

func (d *state) UnmarshalBinary(b []byte) error {
	if len(b) != marshaledSize {
		return errors.New("sha3: invalid hash state")
	}

	magic := string(b[:len(magicKeccak)])
	b = b[len(magicKeccak):]
	switch {
	case magic == magicKeccak && d.dsbyte == dsbyteKeccak:
	default:
		return errors.New("sha3: invalid hash state identifier")
	}

	rate := int(b[0])
	b = b[1:]
	if rate != d.rate {
		return errors.New("sha3: invalid hash state function")
	}

	copy(d.a[:], b)
	b = b[len(d.a):]

	n, state := int(b[0]), spongeDirection(b[1])
	if n > d.rate {
		return errors.New("sha3: invalid hash state")
	}
	d.n = n
	if state != spongeAbsorbing && state != spongeSqueezing {
		return errors.New("sha3: invalid hash state")
	}
	d.state = state

	return nil
}