// Copyright 2015 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.

package buildlet // import "golang.org/x/build/buildlet"

import (
	"bufio"
	"context"
	"encoding/json"
	"errors"
	"fmt"
	"io"
	"io/ioutil"
	"log"
	"net"
	"net/http"
	"net/url"
	"os"
	"strings"
	"sync"
	"time"
)

var _ Client = (*client)(nil)

// NewClient returns a *client that will manipulate ipPort,
// authenticated using the provided keypair.
//
// This constructor returns immediately without testing the host or auth.
func NewClient(ipPort string, kp KeyPair) Client {
	tr := &http.Transport{
		Dial:            defaultDialer(),
		DialTLS:         kp.tlsDialer(),
		IdleConnTimeout: time.Minute,
	}
	c := &client{
		ipPort:     ipPort,
		tls:        kp,
		password:   kp.Password(),
		httpClient: &http.Client{Transport: tr},
		closeFuncs: []func(){tr.CloseIdleConnections},
	}
	c.setCommon()
	return c
}

func (c *client) setCommon() {
	c.peerDead = make(chan struct{})
	c.ctx, c.ctxCancel = context.WithCancel(context.Background())
}

// SetOnHeartbeatFailure sets a function to be called when heartbeats
// against this builder fail, or when the client is destroyed with
// Close. The function fn is never called more than once.
// SetOnHeartbeatFailure must be set before any use of the buildlet.
func (c *client) SetOnHeartbeatFailure(fn func()) {
	c.heartbeatFailure = fn
}

var ErrClosed = errors.New("buildlet: Client closed")

// Closes destroys and closes down the buildlet, destroying all state
// immediately.
func (c *client) Close() error {
	// TODO(bradfitz): have a Client-wide Done channel we set on
	// all outbound HTTP Requests and close it in the once here?
	// Then if something was in-flight and somebody else Closes,
	// the local http.Transport notices, rather than noticing via
	// the remote machine dying or timing out.
	c.closeOnce.Do(func() {
		// Send a best-effort notification to the server to destroy itself.
		// Don't want too long (since it's likely in a broken state anyway).
		// Ignore the return value, since we're about to forcefully destroy
		// it anyway.
		req, err := http.NewRequest("POST", c.URL()+"/halt", nil)
		if err != nil {
			// ignore.
		} else {
			_, err = c.doHeaderTimeout(req, 2*time.Second)
		}
		if err == nil {
			err = ErrClosed
		}
		for _, fn := range c.closeFuncs {
			fn()
		}
		c.setPeerDead(err) // which will also cause c.heartbeatFailure to run
	})
	return nil
}

func (c *client) setPeerDead(err error) {
	c.setPeerDeadOnce.Do(func() {
		c.MarkBroken()
		if err == nil {
			err = errors.New("peer dead (no specific error)")
		}
		c.deadErr = err
		close(c.peerDead)
	})
}

// SetDescription sets a short description of where the buildlet
// connection came from.  This is used by the build coordinator status
// page, mostly for debugging.
func (c *client) SetDescription(v string) {
	c.desc = v
}

// SetInstanceName sets an instance name for GCE and EC2 buildlets.
// This value differs from the buildlet name used in the CLI and web interface.
func (c *client) SetInstanceName(v string) {
	c.instanceName = v
}

// InstanceName gets an instance name for GCE and EC2 buildlets.
// This value differs from the buildlet name used in the CLI and web interface.
// For non-GCE or EC2 buildlets, this will return an empty string.
func (c *client) InstanceName() string {
	return c.instanceName
}

// SetHTTPClient replaces the underlying HTTP client.
// It should only be called before the Client is used.
func (c *client) SetHTTPClient(httpClient *http.Client) {
	c.httpClient = httpClient
}

// SetDialer sets the function that creates a new connection to the buildlet.
// By default, net.Dialer.DialContext is used. SetDialer has effect only when
// TLS isn't used.
//
// TODO(bradfitz): this is only used for ssh connections to buildlets,
// which previously required the client to do its own net.Dial +
// upgrade request. But now that the net/http client supports
// read/write bodies for protocol upgrades, we could change how ssh
// works and delete this.
func (c *client) SetDialer(dialer func(context.Context) (net.Conn, error)) {
	c.dialer = dialer
}

// defaultDialer returns the net/http package's default Dial function.
// Notably, this sets TCP keep-alive values, so when we kill VMs
// (whose TCP stacks stop replying, forever), we don't leak file
// descriptors for otherwise forever-stalled TCP connections.
func defaultDialer() func(network, addr string) (net.Conn, error) {
	if fn := http.DefaultTransport.(*http.Transport).Dial; fn != nil {
		return fn
	}
	return net.Dial
}

// A client interacts with a single buildlet.
type client struct {
	ipPort         string // required, unless remoteBuildlet+baseURL is set
	tls            KeyPair
	httpClient     *http.Client
	dialer         func(context.Context) (net.Conn, error) // nil means to use net.Dialer.DialContext
	baseURL        string                                  // optional baseURL (used by remote buildlets)
	authUser       string                                  // defaults to "gomote", if password is non-empty
	password       string                                  // basic auth password or empty for none
	remoteBuildlet string                                  // non-empty if for remote buildlets (used by client)
	name           string                                  // optional name for debugging, returned by Name
	instanceName   string                                  // instance name for GCE and EC2 VMs

	closeFuncs []func() // optional extra code to run on close

	ctx              context.Context
	ctxCancel        context.CancelFunc
	heartbeatFailure func() // optional
	desc             string

	closeOnce         sync.Once
	initHeartbeatOnce sync.Once
	setPeerDeadOnce   sync.Once
	peerDead          chan struct{} // closed on peer death
	deadErr           error         // guarded by peerDead's close

	mu     sync.Mutex
	broken bool // client is broken in some way
}

func (c *client) String() string {
	if c == nil {
		return "(nil buildlet.Client)"
	}
	return strings.TrimSpace(c.URL() + " " + c.desc)
}

// RemoteName returns the name of this client's buildlet on the
// coordinator. If this buildlet isn't a remote buildlet created via
// gomote, this returns the empty string.
func (c *client) RemoteName() string {
	return c.remoteBuildlet
}

// URL returns the buildlet's URL prefix, without a trailing slash.
func (c *client) URL() string {
	if c.baseURL != "" {
		return strings.TrimRight(c.baseURL, "/")
	}
	if !c.tls.IsZero() {
		return "https://" + strings.TrimSuffix(c.ipPort, ":443")
	}
	return "http://" + strings.TrimSuffix(c.ipPort, ":80")
}

func (c *client) IPPort() string { return c.ipPort }

func (c *client) SetName(name string) { c.name = name }

// Name returns the name of this buildlet.
// It returns the first non-empty string from the name given to
// SetName, its remote buildlet name, its ip:port, or "(unnamed-buildlet)" in the case where
// ip:port is empty because there's a custom dialer.
func (c *client) Name() string {
	if c.name != "" {
		return c.name
	}
	if c.remoteBuildlet != "" {
		return c.remoteBuildlet
	}
	if c.ipPort != "" {
		return c.ipPort
	}
	return "(unnamed-buildlet)"
}

// MarkBroken marks this client as broken in some way.
func (c *client) MarkBroken() {
	c.mu.Lock()
	defer c.mu.Unlock()
	c.broken = true
	c.ctxCancel()
}

// IsBroken reports whether this client is broken in some way.
func (c *client) IsBroken() bool {
	c.mu.Lock()
	defer c.mu.Unlock()
	return c.broken
}

func (c *client) authUsername() string {
	if c.authUser != "" {
		return c.authUser
	}
	return "gomote"
}

func (c *client) do(req *http.Request) (*http.Response, error) {
	c.initHeartbeatOnce.Do(c.initHeartbeats)
	if c.password != "" {
		req.SetBasicAuth(c.authUsername(), c.password)
	}
	if c.remoteBuildlet != "" {
		req.Header.Set("X-Buildlet-Proxy", c.remoteBuildlet)
	}
	return c.httpClient.Do(req)
}

// ProxyTCP connects to the given port on the remote buildlet.
// The buildlet client must currently be a gomote client (RemoteName != "")
// and the target type must be a VM type running on GCE. This was primarily
// created for RDP to Windows machines, but it might get reused for other
// purposes in the future.
func (c *client) ProxyTCP(port int) (io.ReadWriteCloser, error) {
	if c.RemoteName() == "" {
		return nil, errors.New("ProxyTCP currently only supports gomote-created buildlets")
	}
	req, err := http.NewRequest("POST", c.URL()+"/tcpproxy", nil)
	if err != nil {
		return nil, err
	}
	req.Header.Add("X-Target-Port", fmt.Sprint(port))
	res, err := c.do(req)
	if err != nil {
		return nil, err
	}
	if res.StatusCode != http.StatusSwitchingProtocols {
		slurp, _ := ioutil.ReadAll(io.LimitReader(res.Body, 4<<10))
		res.Body.Close()
		return nil, fmt.Errorf("wanted 101 Switching Protocols; unexpected response: %v, %q", res.Status, slurp)
	}
	rwc, ok := res.Body.(io.ReadWriteCloser)
	if !ok {
		res.Body.Close()
		return nil, fmt.Errorf("tcpproxy response was not a Writer")
	}
	return rwc, nil
}

// ProxyRoundTripper returns a RoundTripper that sends HTTP requests directly
// through to the underlying buildlet, adding auth and X-Buildlet-Proxy headers
// as necessary. This is really only intended for use by the coordinator.
func (c *client) ProxyRoundTripper() http.RoundTripper {
	return proxyRoundTripper{c}
}

type proxyRoundTripper struct {
	c *client
}

func (p proxyRoundTripper) RoundTrip(req *http.Request) (*http.Response, error) {
	return p.c.do(req)
}

func (c *client) initHeartbeats() {
	go c.heartbeatLoop()
}

func (c *client) heartbeatLoop() {
	failInARow := 0
	for {
		select {
		case <-c.peerDead:
			// Dead for whatever reason (heartbeat, remote
			// side closed, caller Closed
			// normally). Regardless, we call the
			// heartbeatFailure func if set.
			if c.heartbeatFailure != nil {
				c.heartbeatFailure()
			}
			return
		case <-time.After(10 * time.Second):
			t0 := time.Now()
			if _, err := c.Status(context.Background()); err != nil {
				failInARow++
				if failInARow == 3 {
					log.Printf("Buildlet %v failed three heartbeats; final error: %v", c, err)
					c.setPeerDead(fmt.Errorf("Buildlet %v failed heartbeat after %v; marking dead; err=%v", c, time.Since(t0), err))
				}
			} else {
				failInARow = 0
			}
		}
	}
}

var errHeaderTimeout = errors.New("timeout waiting for headers")

// doHeaderTimeout calls c.do(req) and returns its results, or
// errHeaderTimeout if max elapses first.
func (c *client) doHeaderTimeout(req *http.Request, max time.Duration) (res *http.Response, err error) {
	type resErr struct {
		res *http.Response
		err error
	}

	ctx, cancel := context.WithCancel(req.Context())

	req = req.WithContext(ctx)

	timer := time.NewTimer(max)
	defer timer.Stop()

	resErrc := make(chan resErr, 1)
	go func() {
		res, err := c.do(req)
		resErrc <- resErr{res, err}
	}()

	cleanup := func() {
		cancel()
		if re := <-resErrc; re.res != nil {
			re.res.Body.Close()
		}
	}

	select {
	case re := <-resErrc:
		if re.err != nil {
			cancel()
			return nil, re.err
		}
		// Clean up our cancel context above when the caller
		// reads to the end of the response body or closes.
		re.res.Body = onEOFReadCloser{re.res.Body, cancel}
		return re.res, nil
	case <-c.peerDead:
		log.Printf("%s: peer dead with %v, waiting for headers for %v", c.Name(), c.deadErr, req.URL.Path)
		go cleanup()
		return nil, c.deadErr
	case <-timer.C:
		log.Printf("%s: timeout after %v waiting for headers for %v", c.Name(), max, req.URL.Path)
		go cleanup()
		return nil, errHeaderTimeout
	}
}

// doOK sends the request and expects a 200 OK response.
func (c *client) doOK(req *http.Request) error {
	res, err := c.do(req)
	if err != nil {
		return err
	}
	defer res.Body.Close()
	if res.StatusCode != http.StatusOK {
		slurp, _ := ioutil.ReadAll(io.LimitReader(res.Body, 4<<10))
		return fmt.Errorf("%v; body: %s", res.Status, slurp)
	}
	return nil
}

// PutTar writes files to the remote buildlet, rooted at the relative
// directory dir.
// If dir is empty, they're placed at the root of the buildlet's work directory.
// The dir is created if necessary.
// The Reader must be of a tar.gz file.
func (c *client) PutTar(ctx context.Context, r io.Reader, dir string) error {
	req, err := http.NewRequest("PUT", c.URL()+"/writetgz?dir="+url.QueryEscape(dir), r)
	if err != nil {
		return err
	}
	return c.doOK(req.WithContext(ctx))
}

// PutTarFromURL tells the buildlet to download the tar.gz file from tarURL
// and write it to dir, a relative directory from the workdir.
// If dir is empty, they're placed at the root of the buildlet's work directory.
// The dir is created if necessary.
// The url must be of a tar.gz file.
func (c *client) PutTarFromURL(ctx context.Context, tarURL, dir string) error {
	form := url.Values{
		"url": {tarURL},
	}
	req, err := http.NewRequest("POST", c.URL()+"/writetgz?dir="+url.QueryEscape(dir), strings.NewReader(form.Encode()))
	if err != nil {
		return err
	}
	req.Header.Set("Content-Type", "application/x-www-form-urlencoded")
	return c.doOK(req.WithContext(ctx))
}

// Put writes the provided file to path (relative to workdir) and sets mode.
// It creates any missing parent directories with 0755 permission.
func (c *client) Put(ctx context.Context, r io.Reader, path string, mode os.FileMode) error {
	param := url.Values{
		"path": {path},
		"mode": {fmt.Sprint(int64(mode))},
	}
	req, err := http.NewRequest("PUT", c.URL()+"/write?"+param.Encode(), r)
	if err != nil {
		return err
	}
	return c.doOK(req.WithContext(ctx))
}

// GetTar returns a .tar.gz stream of the given directory, relative to the buildlet's work dir.
// The provided dir may be empty to get everything.
func (c *client) GetTar(ctx context.Context, dir string) (io.ReadCloser, error) {
	req, err := http.NewRequest("GET", c.URL()+"/tgz?dir="+url.QueryEscape(dir), nil)
	if err != nil {
		return nil, err
	}
	res, err := c.do(req.WithContext(ctx))
	if err != nil {
		return nil, err
	}
	if res.StatusCode != http.StatusOK {
		slurp, _ := ioutil.ReadAll(io.LimitReader(res.Body, 4<<10))
		res.Body.Close()
		return nil, fmt.Errorf("%v; body: %s", res.Status, slurp)
	}
	return res.Body, nil
}

// ExecOpts are options for a remote command invocation.
type ExecOpts struct {
	// Output is the output of stdout and stderr.
	// If nil, the output is discarded.
	Output io.Writer

	// Dir is the directory from which to execute the command,
	// as an absolute or relative path using the buildlet's native
	// path separator, or a slash-separated relative path.
	// If relative, it is relative to the buildlet's work directory.
	//
	// Dir is optional. If not specified, it defaults to the directory of
	// the command, or the work directory if SystemLevel is set.
	Dir string

	// Args are the arguments to pass to the cmd given to Client.Exec.
	Args []string

	// ExtraEnv are KEY=VALUE pairs to append to the buildlet
	// process's environment.
	ExtraEnv []string

	// Path, if non-nil, specifies the PATH variable of the executed process's
	// environment. Each path in the list should use separators native to the
	// buildlet's platform, and a non-nil empty list clears the path.
	//
	// The following expansions apply:
	//   - the string "$PATH" expands to any existing PATH element(s)
	//   - the substring "$WORKDIR" expands to buildlet's temp workdir
	//
	// After expansion, the list is joined with an OS-specific list
	// separator and supplied to the executed process as its PATH
	// environment variable.
	Path []string

	// SystemLevel controls whether the command is expected to be found outside of
	// the buildlet's environment.
	SystemLevel bool

	// Debug, if true, instructs to the buildlet to print extra debug
	// info to the output before the command begins executing.
	Debug bool

	// OnStartExec is an optional hook that runs after the 200 OK
	// response from the buildlet, but before the output begins
	// writing to Output.
	OnStartExec func()
}

// ErrTimeout is a sentinel error that represents that waiting
// for a command to complete has exceeded the given timeout.
var ErrTimeout = errors.New("buildlet: timeout waiting for command to complete")

// Exec runs cmd on the buildlet.
//
// cmd may be an absolute or relative path using the buildlet's native path
// separator, or a slash-separated relative path. If relative, it is
// relative to the buildlet's work directory (not opts.Dir).
//
// Two errors are returned: one is whether the command succeeded
// remotely (remoteErr), and the second (execErr) is whether there
// were system errors preventing the command from being started or
// seen to completition. If execErr is non-nil, the remoteErr is
// meaningless.
//
// If the context's deadline is exceeded while waiting for the command
// to complete, the returned execErr is ErrTimeout.
func (c *client) Exec(ctx context.Context, cmd string, opts ExecOpts) (remoteErr, execErr error) {
	var mode string
	if opts.SystemLevel {
		mode = "sys"
	}
	path := opts.Path
	if len(path) == 0 && path != nil {
		// url.Values doesn't distinguish between a nil slice and
		// a non-nil zero-length slice, so use this sentinel value.
		path = []string{"$EMPTY"}
	}
	form := url.Values{
		"cmd":    {cmd},
		"mode":   {mode},
		"dir":    {opts.Dir},
		"cmdArg": opts.Args,
		"env":    opts.ExtraEnv,
		"path":   path,
		"debug":  {fmt.Sprint(opts.Debug)},
	}
	req, err := http.NewRequest("POST", c.URL()+"/exec", strings.NewReader(form.Encode()))
	if err != nil {
		return nil, err
	}
	req = req.WithContext(ctx)
	req.Header.Set("Content-Type", "application/x-www-form-urlencoded")

	// The first thing the buildlet's exec handler does is flush the headers, so
	// 20 seconds should be plenty of time, regardless of where on the planet
	// (Atlanta, Paris, Sydney, etc.) the reverse buildlet is:
	res, err := c.doHeaderTimeout(req, 20*time.Second)
	if err == errHeaderTimeout {
		// If we don't see headers after all that time,
		// consider the buildlet to be unhealthy.
		c.MarkBroken()
		return nil, errors.New("buildlet: timeout waiting for exec header response")
	} else if err != nil {
		return nil, err
	}
	defer res.Body.Close()
	if res.StatusCode != http.StatusOK {
		slurp, _ := ioutil.ReadAll(io.LimitReader(res.Body, 4<<10))
		return nil, fmt.Errorf("buildlet: HTTP status %v: %s", res.Status, slurp)
	}
	condRun(opts.OnStartExec)

	type errs struct {
		remoteErr, execErr error
	}
	resc := make(chan errs, 1)
	go func() {
		// Stream the output:
		out := opts.Output
		if out == nil {
			out = ioutil.Discard
		}
		if _, err := io.Copy(out, res.Body); err != nil {
			resc <- errs{execErr: fmt.Errorf("error copying response: %w", err)}
			return
		}

		// Don't record to the dashboard unless we heard the trailer from
		// the buildlet, otherwise it was probably some unrelated error
		// (like the VM being killed, or the buildlet crashing due to
		// e.g. https://golang.org/issue/9309, since we require a tip
		// build of the buildlet to get Trailers support)
		state := res.Trailer.Get("Process-State")
		if state == "" {
			resc <- errs{execErr: errors.New("missing Process-State trailer from HTTP response; buildlet built with old (<= 1.4) Go?")}
			return
		}
		if state != "ok" {
			resc <- errs{remoteErr: errors.New(state)}
		} else {
			resc <- errs{} // success
		}
	}()
	select {
	case res := <-resc:
		if res.execErr != nil {
			// Note: We've historically marked the buildlet as unhealthy after
			// reaching any kind of execution error, even when it's a remote command
			// execution timeout (see use of ErrTimeout below).
			// This is certainly on the safer side of avoiding false positive signal,
			// but maybe someday we'll want to start to rely on the buildlet to report
			// such a condition and not mark it as unhealthy.

			c.MarkBroken()
			if errors.Is(res.execErr, context.DeadlineExceeded) {
				res.execErr = ErrTimeout
			}
		}
		return res.remoteErr, res.execErr
	case <-c.peerDead:
		return nil, c.deadErr
	}
}

// RemoveAll deletes the provided paths, relative to the work directory.
func (c *client) RemoveAll(ctx context.Context, paths ...string) error {
	if len(paths) == 0 {
		return nil
	}
	form := url.Values{"path": paths}
	req, err := http.NewRequest("POST", c.URL()+"/removeall", strings.NewReader(form.Encode()))
	if err != nil {
		return err
	}
	req.Header.Set("Content-Type", "application/x-www-form-urlencoded")
	return c.doOK(req.WithContext(ctx))
}

// Status provides status information about the buildlet.
//
// A coordinator can use the provided information to decide what, if anything,
// to do with a buildlet.
type Status struct {
	Version int // buildlet version, coordinator rejects value that is too old (see minBuildletVersion).
}

// Status returns an Status value describing this buildlet.
func (c *client) Status(ctx context.Context) (Status, error) {
	select {
	case <-c.peerDead:
		return Status{}, c.deadErr
	default:
		// Continue below.
	}
	req, err := http.NewRequest("GET", c.URL()+"/status", nil)
	if err != nil {
		return Status{}, err
	}
	req = req.WithContext(ctx)
	resp, err := c.doHeaderTimeout(req, 20*time.Second) // plenty of time
	if err != nil {
		return Status{}, err
	}
	if resp.StatusCode != http.StatusOK {
		return Status{}, errors.New(resp.Status)
	}
	b, err := ioutil.ReadAll(resp.Body)
	resp.Body.Close()
	if err != nil {
		return Status{}, err
	}
	var status Status
	if err := json.Unmarshal(b, &status); err != nil {
		return Status{}, err
	}
	return status, nil
}

// WorkDir returns the absolute path to the buildlet work directory.
func (c *client) WorkDir(ctx context.Context) (string, error) {
	req, err := http.NewRequest("GET", c.URL()+"/workdir", nil)
	if err != nil {
		return "", err
	}
	req = req.WithContext(ctx)
	resp, err := c.doHeaderTimeout(req, 20*time.Second) // plenty of time
	if err != nil {
		return "", err
	}
	if resp.StatusCode != http.StatusOK {
		return "", errors.New(resp.Status)
	}
	b, err := ioutil.ReadAll(resp.Body)
	resp.Body.Close()
	if err != nil {
		return "", err
	}
	return string(b), nil
}

// DirEntry is the information about a file on a buildlet.
type DirEntry struct {
	// Line is of the form "drw-rw-rw\t<name>" and then if a regular file,
	// also "\t<size>\t<modtime>". in either case, without trailing newline.
	// TODO: break into parsed fields?
	Line string
}

func (de DirEntry) String() string {
	return de.Line
}

// Name returns the relative path to the file, such as "src/net/http/" or "src/net/http/jar.go".
func (de DirEntry) Name() string {
	f := strings.Split(de.Line, "\t")
	if len(f) < 2 {
		return ""
	}
	return f[1]
}

// Perm returns the permission bits in string form, such as "-rw-r--r--" or "drwxr-xr-x".
func (de DirEntry) Perm() string {
	i := strings.IndexByte(de.Line, '\t')
	if i == -1 {
		return ""
	}
	return de.Line[:i]
}

// IsDir reports whether de describes a directory. That is,
// it tests for the os.ModeDir bit being set in de.Perm().
func (de DirEntry) IsDir() bool {
	if len(de.Line) == 0 {
		return false
	}
	return de.Line[0] == 'd'
}

// Digest returns the SHA-1 digest of the file, such as "da39a3ee5e6b4b0d3255bfef95601890afd80709".
// It returns the empty string if the digest isn't included.
func (de DirEntry) Digest() string {
	f := strings.Split(de.Line, "\t")
	if len(f) < 5 {
		return ""
	}
	return f[4]
}

// ListDirOpts are options for Client.ListDir.
type ListDirOpts struct {
	// Recursive controls whether the directory is listed
	// recursively.
	Recursive bool

	// Skip are the directories to skip, relative to the directory
	// passed to ListDir. Each item should contain only forward
	// slashes and not start or end in slashes.
	Skip []string

	// Digest controls whether the SHA-1 digests of regular files
	// are returned.
	Digest bool
}

// ListDir lists the contents of a directory.
// The fn callback is run for each entry.
// The directory dir itself is not included.
func (c *client) ListDir(ctx context.Context, dir string, opts ListDirOpts, fn func(DirEntry)) error {
	param := url.Values{
		"dir":       {dir},
		"recursive": {fmt.Sprint(opts.Recursive)},
		"skip":      opts.Skip,
		"digest":    {fmt.Sprint(opts.Digest)},
	}
	req, err := http.NewRequest("GET", c.URL()+"/ls?"+param.Encode(), nil)
	if err != nil {
		return err
	}
	resp, err := c.do(req.WithContext(ctx))
	if err != nil {
		return err
	}
	defer resp.Body.Close()
	if resp.StatusCode != http.StatusOK {
		slurp, _ := ioutil.ReadAll(io.LimitReader(resp.Body, 1<<10))
		return fmt.Errorf("%s: %s", resp.Status, slurp)
	}
	sc := bufio.NewScanner(resp.Body)
	for sc.Scan() {
		line := strings.TrimSpace(sc.Text())
		fn(DirEntry{Line: line})
	}
	return sc.Err()
}

func (c *client) getDialer() func(context.Context) (net.Conn, error) {
	if !c.tls.IsZero() {
		return func(_ context.Context) (net.Conn, error) {
			return c.tls.tlsDialer()("tcp", c.ipPort)
		}
	}
	if c.dialer != nil {
		return c.dialer
	}
	return c.dialWithNetDial
}

func (c *client) dialWithNetDial(ctx context.Context) (net.Conn, error) {
	var d net.Dialer
	return d.DialContext(ctx, "tcp", c.ipPort)
}

// ConnectSSH opens an SSH connection to the buildlet for the given username.
// The authorizedPubKey must be a line from an ~/.ssh/authorized_keys file
// and correspond to the private key to be used to communicate over the net.Conn.
func (c *client) ConnectSSH(user, authorizedPubKey string) (net.Conn, error) {
	ctx, cancel := context.WithTimeout(context.Background(), 15*time.Second)
	defer cancel()
	conn, err := c.getDialer()(ctx)
	if err != nil {
		return nil, fmt.Errorf("error dialing HTTP connection before SSH upgrade: %v", err)
	}
	deadline, _ := ctx.Deadline()
	conn.SetDeadline(deadline)
	req, err := http.NewRequest("POST", "/connect-ssh", nil)
	if err != nil {
		conn.Close()
		return nil, err
	}
	req.Header.Add("X-Go-Ssh-User", user)
	req.Header.Add("X-Go-Authorized-Key", authorizedPubKey)
	if !c.tls.IsZero() {
		req.SetBasicAuth(c.authUsername(), c.password)
	}
	if err := req.Write(conn); err != nil {
		conn.Close()
		return nil, fmt.Errorf("writing /connect-ssh HTTP request failed: %v", err)
	}
	bufr := bufio.NewReader(conn)
	res, err := http.ReadResponse(bufr, req)
	if err != nil {
		conn.Close()
		return nil, fmt.Errorf("reading /connect-ssh response: %v", err)
	}
	if res.StatusCode != http.StatusSwitchingProtocols {
		slurp, _ := ioutil.ReadAll(res.Body)
		conn.Close()
		return nil, fmt.Errorf("unexpected /connect-ssh response: %v, %s", res.Status, slurp)
	}
	conn.SetDeadline(time.Time{})
	return conn, nil
}

func condRun(fn func()) {
	if fn != nil {
		fn()
	}
}

type onEOFReadCloser struct {
	rc io.ReadCloser
	fn func()
}

func (o onEOFReadCloser) Read(p []byte) (n int, err error) {
	n, err = o.rc.Read(p)
	if err == io.EOF {
		o.fn()
	}
	return
}

func (o onEOFReadCloser) Close() error {
	o.fn()
	return o.rc.Close()
}